Rates DB Air (Requirements)
From UG
Contents
|
Info
- mantis# 0002894: [Rates DB] Implement phase1 for MOT Air
See also: http://ct.jaguarfreight.com/wiki/Rates_DB
Glossary
Weight Break is the point at which the weight or chargeable weight of a shipment is large enough to be assessed the lower freight rates which are applicable to larger shipments, this is as per the carrier's tariff.
Chargeable Weight of cargo intended for air shipment is the actual gross weight (gw) or the volume weight (vw), whichever is greater.
Actual Gross Weight or GW is the actual weight of the shipment
Volume Weight or VW is calculated based on a cargo's size, measurement or dimensions
Minimum or Min is the lowest amount that can be charged for the service.
Maximum or Max is the highest amount that can be charged for the service.
Flat Fee is a single fixed fee for a service
Unit load device or ULD is a pallet or container used to load freight on an aircraft. It allows a large quantity of cargo to be bundled into a single unit.
- ULD pallets are rugged sheets of aluminum with rims designed to lock onto cargo net lugs
- ULD containers, also known as cans and pods, are closed containers, which, depending on the nature of the goods to be transported, may have built-in refrigeration units
Drum is a cylindrical container used for shipping bulk cargo (a liquid or as a mass of relatively small solids like grains). Drums can be made of steel, dense paperboard (commonly called a fiber drum), or plastics, and are generally used for the transportation of certain dangerous materials or modest quantities of bulk goods.
Known Shipper A shipper that is qualified by specific regulations as a known shipper. A known shipper has less restrictions for shipping and as a result will usually have lower rates.
Unknown Shipper A shipper that has not yet been qualified according to the Transportation Security Administrations regulations as a known shipper. An Unknown shipper's cargo has more restrictions when shipping and therefore may have to pay higher rates to ship cargo.
Hazardous Freight is freight that is capable of posing risk to people, health, property, or environment when transported in quantity. AKA dangerous goods
Summary
What are we trying to achieve? What are the main goals of this module?
Core need
Jaguar Global needs Tariff and Contract Management System with additional functionality that will improve/affect other areas such as CT creation, invoices, reports, etc.
Currently there seems to be no standard in obtaining or maintaining rates. When a rate is required, operators will obtain the rates either by, searching online tariffs, searching rate management systems (Rate Explorer), sending an email request, telephone calls, searching previous emails, searching documents saved on their desktop or manually looking through paper copies of contracts or tariffs. This is currently being done by various employees with little sharing of the information.
Core functionality
Creating such "database" should allow operators throughout the organization (including overseas offices) to share and compare this information.
Main Features:
- management of tariffs and contracts (purchase and sales sides)
- adding, editing, deleting, listing, searching, sorting, querying
NOTE: Purchase side - phase 1 and sales sides - phase 2
- "Quotations" web portal and internal (for Jag Sales, Ops, Clients, etc)
- searching, sorting, querying and producing an official Jag doc (with number, etc)
Additional Ops features:
- CT could be created based on quote
Additional Acc features:
- Automated population of charge table in "sales invoices"
- Automated calculation of "estimated cost and sale" for a shipment
- Auto approval of PI charges
The system should be able to provide quick user friendly access to all current costs.
Details
Types of tariffs
- Ocean FCL
- Ocean LCL
- Air
- Trucking
- Customs
The database would be used for various reasons
Rates structures and formulas
Each charge will have its own rates structures and formulas necessary to maintain these rates. However, it is possible to have some costs that are an all in rate.
For Example: We could receive a rate from Air France for a shipment from JFK to CDG of 100 K showing: Air Freight: .75 Fuel Surcharge .90 Security .75 Then we could receive a rate from KLM for the same shipment showing: Air Freight: 2.40 all in These rates are equal, they are only shown differently.
It is possible that each rate may have multiple variables.(minimums, maximums, weight breaks, etc...)
The system will also need to capture accessorial charges, which will also be defined per MOT.
Specific vendor
Rates will be linked to a specific vendor and description.
Search and estimation
- Searched by Jaguar employees to
- Compare costs for different vendors
- Quote costs based on the costs saved in the system
- Searching Vendors or Carriers
- Searched by Jaguar employees to compare carriers
- Estimation of CT costs
- Estimate sales invoice with possible auto generation.
Generating Sales Quotes
- Searched by Customers for general rates
- Searched by Customers for customer specific rates
- Searched by Jaguar employees to generate for Customers and enable overseas office to access rates.
- Searching Costs
Maintaining Customer specific sell rates TDB
Additional Details
The rates database system, should be user friendly with quick results.
The system should offer multiple search filters. The user should be able to select only one filter or multiple filters
- By Vendor
- By Carrier
- By Co-loader
- By origin airport
- By destination airport
- Actual Weight
- Chargeable Weight
- Dimensions
- Known or Unknown
- Hazardous or Non Hazardous
- Commodity
The system should show all results based on the filters set, so the operator can narrow done the results by selecting multiple filters.
The results should be sortable by each column of output, but should default with the lowest rate to highest rate.
Output should include
- Vendor or Carrier
- Co-loader
- Departure or Origin Airport
- Arrival or Destination Airport
Should list complete tariff and narrow down based on if the below filters are set.
- Actual Weight
- Chargeable Weight
- Dimensions
- Known or Unknown
- Hazardous or Non Hazardous
- Commodity
If none of these filters are set, the system should include weight breaks, known and unknown rates.
Q and A
Charge codes and other CT2 components related to Rates DB
Please explain what do we already have in CT2 that is related to Rates DB. For example Charge codes.
File below is cc air.xls attached to 0002894: [Rates DB] Implement phase1 for MOT Air
Current business process
Questions
- What ids the current business process - How Jaguar deals with Contracts and Tariffs (in each office) now?
- Who is in charge for this in each office?
- Please describe "A Day in the life of Inside Sales Dept NOW"
- In what form existing Air contracts received and maintained ?
- How requests for rates handled (receive, search, answer)?
- What is the typical Request format?
- What is typical Response format?
- Sounds like most of these are "spot rates" received by phone call? Is that right? Do we ever in a response to a phone call ever receive "entire contract" by email instead of just rate from A to B for specific cargo and dates?
Answers
NY office
NY office has a special group called "Inside Sales".
- Steve - manager
- Sylvia - handles mostly ocean, gets involved into ocean contracts, main user of Rate Explorer?
- Mary - handles ocean, air
They are responsible for providing cost's to our Outside Sales team, operations team, and overseas offices.
They also assist in quoting Customers sell rates.
....
NY office has tariffs in place with 3 airlines and 2 co-loaders.
London office
TBD
Paris office
TBD
HK office
TBD
Future business process
Questions
- What is the vision for the biz proc in the future?
- A Day in the life of Inside Sales ONCE SYSTEM IS IN PLACE.
- Explain vision of every office.
- This should be formulated by person responsible for this area(like Steven in NY).
Answers
NY office
TBD
London office
TBD
Paris office
TBD
HK office
TBD
Various types of Contracts and Tariffs And How to calculate rate from point A to point B
Questions
- Provide examples of contracts/tariffs used by Jaguar.
- At least one example for each type.
- Provide example of how to manually calculate rate for specific request.
- Attach actual contract/tariff into mantis. Post screen shot into wiki and explain.
- If possible classify all types of existing Air tariffs.
Answers
Singapore Air contract
It comes as an xls file with two tabs. See below. (Original file Singapore Air NYC Rates Apr 1 - Sep 30 2011 example rate sheet.xlsx attached to 0002894: [Rates DB] Implement phase1 for MOT Air ).
The attached spreadsheet is an example of one of the airlines tariffs.
The top of the page shows you the airline, the commodity (general cargo), any exclusion or notes and the date range these rates are valid for.
Table:
Column A is the origin of the shipment.
Column B is the name of the destination.
Column C is the Country of destination.
Column D is the 3 letter destination airport code.
Column E is the commodity type line.
Column F is the 3 letter commodity type
Column G is the minimum air freight charge for the origin and destination pairing (column A and Column D)
Column H TBD - (The – 45 kilo rate. This is the rate per Kilo from 0 K to the next weight break, in this example it is + 45 Kilo’s.
So this rate is for 1 Kilo – 44 Kilo’s, as long as the total is higher than the minimum rate.
Column I - is the + 45 Kilo rate. This is the rate per Kilo over 45 K and under the next weight break (in this example the next weight break is 100 +, so this rate is for 45K – 99 Kilo’s, as long as the rate is higher than the minimum.
Column J – Is the + 100 Kilo rate – following the same rules as Column I.
Column K – Is the + 300 Kilo rate – following the same rules as Column I.
Column L – Is the + 500 Kilo rate – following the same rules as Column I.
Column M – Is the + 1000 Kilo rate – following the same rules as Column I.
Using this drop downs on the spreadsheet, you can set filters to view multiple selections or narrow it down to just one line.
Tab 2
Example 1:
(Setting column A to NYC and Column D to AKL for a shipment from NY to New Zealand)
If you have a shipment of boxes that is a total of 5 cartons, total 20 K, and total 45 K chargeable weight going from NY to New Zealand.
You would use the dropdown to set as much information as possible.
I set A to NYC, D to AKL, and E to general. This narrowed it down to one line where I can see my rate for this shipment.
Misc
Types and Examples of Air contracts
Examples attached to Mantis http://ct.jaguarfreight.com/mantis/view.php?id=2894 . Sample XLS Quote form. This is what the ISales department uses to create quotes. Sample PDF Quote form. This is a copy of the quote generated from the above. Sample XLS Quote Report. Steven Inside Sales Manager has been assigning a quote number to each quote he creates and logging these into an excel sheet to keep track. Sample of Co-loaders tariff - This is an example of one of the tariffs inside sales uses to search rates offered by one of our co-loaders. Singapore Rates - This is an example of one of the airlines rate tariffs used by inside sales to search rates offered by an airline.
Tariff management systems in use
Please find and describe in details any tariff management systems that: a) Jaguar is using b) know but not used in Jaguar
