Client Main Report

From UG

Revision as of 20:51, 13 May 2010 by Montira (Talk | contribs)
Jump to: navigation, search


Contents

Dev

Mantis parent: 0000591:Client.Reports

Business Requirements

Client Main Report is reusing the code from Internal App Main Report. There are some similarities and differences in term of list of filters, output and design.

It allows client to create a report for his/her company's shipments. This applies client's visibility's rules.

Specs

  • See Main report specs from Internal App > Main Report at Main Wizard Report
  • There are 4 different categories for filters:
    • General Filters
    • Transportation Filters
    • Date Filters
    • Output
  • Some filters require Client visibility rule
  • There is Reset Form button; It allows user to clear all the filters to the fresh beginning stage
  • There is Generate Result button; system will generate result after user clicks this button
  • Label of filters' names can be different from Internal Main Report
  • Each filter has "clr" button in order to clear info for a specific filter
  • See #Figure 1. Main report

General Filters

  • All the same as Main report (Internal App) but these filters drop down list MUST be Client specific: Auto populated; it should show only the specific list for client:
    • Client Company
    • Shipper
    • Consignee
    • Origin Country
    • Destination Country
    • Shipping Terms
    • Pickup Locations
    • Delivery Locations
  • The rest of filters are not required Client specific: Auto populated
  • List of filters that are not required, compare to Main Wizard Report on Internal App
    • Export Ref # contains:
    • Import Ref # contains:
    • Jaguar 3rd Ref # contains:
    • Remove Cargo Locations
  • Transport Mode filters in General filters Tab has a logic connecting to Transportation Filters.
    • IF client selects ANY OCEAN for transport mode, Transportation Filters tab will provide ONLY lists of ocean filters as below:
      • Container#s
      • Shipping Line
      • Origin Port/Terminal
      • Destination Port/Terminal
      • Vessel Name Contains
    • IF client select AIR for transport mode, Transportation Filters tab will provide ONLY lists of air filters as below:
      • Airlines
      • Origin Airport
      • Destination Airport

Transportation Filters

  • Transportation Filters
    • AIR filters will ONLY show when client clicks AIR for Transport Mode in General filter tab
      • These filters drop down list MUST be Client specific: Auto populated; it should show only the specific list for client:
        • Airlines
        • Origin Airport
        • Destination Airport
    • OCEAN filters will ONLY show when client clicks ANY OCEAN for Transport Mode in General filter tab
      • These filters drop down list MUST be Client specific: Auto populated; it should show only the specific list for client:
        • Container#s
        • Shipping Line
        • Origin Port/Terminal
        • Destination Port/Terminal
        • Vessel Name Contains
    • TRUCK There is no any filters on Transportation filters
  • See #Figure 2. Transportation Filters for the case of no transport mode is selected or Truck mode(s) is selected from general filters
  • List of filters that are not required, compare to Main Wizard Report on Internal App
      • Pickup Truckers
      • Delivery Truckers
      • Co-Loader Ocean
      • Co-Loader Air

Date Filters

  • Order of Filters from the top to the bottom"
    • Estimated Pickup Date:
    • Actual Pickup Date:
    • Estimated Departure Date:
    • Actual Departure Date:
    • Estimated Arrival Date:
    • Actual Arrival Date:
    • Estimated Delivery Date:
    • Actual Delivery Date:
  • Date Logics:
    • "Delivery Date" cannot be before "Arrival Date", "Departure Date", and "Pickup Date"
    • "Arrival Date" cannot be before "Departure Date", and "Pickup Date"
    • "Departure Date" cannot be before "Pickup Date"
  • Must have "clear" button for every date field .
  • See #Figure 3. Date Filters

Output

  • Output consists of a long list of headings
  • Output list is multi-selected
  • Default: selected output list should be listed on the right box and the rest should be in output dropdown list
  • User is able to manage the order of the output heading list by moving up and down
  • User is able to add/remove the output heading list by moving it to the left or right
  • Label output heading as listed below
    • Field // Apply to Mode // Default on the right box
    • CT# // All modes // Yes
    • Shipper // All modes // Yes
    • Consignee // All modes // Yes
    • Transport Mode // All modes // Yes
    • Departure // All modes // Yes
    • Destination // All modes // Yes
    • Actual Departure Date // All modes // Yes
    • Actual Arrival Date // All modes // Yes
    • Actual Delivery Date // All modes // Yes
    • Commodity Item PO# // All modes // No
    • Commodity Item SKU# // All modes // No
    • Commodity Item Description // All modes // No
    • Commodity Item Quantity // All modes // No
    • Commodity Item Total Pallets // All modes // No
    • Commodity Item Total Loose Packages // All modes // No
    • Commodity Item Gross Weight // All modes // No
    • Chargeable Weight // All modes // No
    • Departure Region // All modes // No
    • Destination Region // All modes // No
    • Notification Date // All modes // No
    • Authorization Date // All modes // No
    • Estimated Departure Date // All modes // No
    • Estimated Arrival Date // All modes // No
    • Estimated Delivery Date // All modes // No
    • Estimated Collection Date // All modes // No
    • Actual Collection Date // All modes // No
    • Vessel name // OCEAN // No
    • Flight Number // AIR // No
    • HAWB# // AIR // No
    • Container Description // OCEAN // No
    • Shipping Line // OCEAN // No
    • Airline // AIR // No

More information from fields above:

Air

ETD :ExpTab 11b. Airport of Departure:
ATD :ExpTab 11c. ATD - Actual Time of Dept:
ETA :ExpTab 14b. ETA - Est Time of Arrival:
ATA :ExpTab 14c. ATA - Actual Time of Arrival:
Estimate Collection Date: GenTab 9. Estimated Export Pick-Up Date:
Actual Collection Date: GenTab 10. Actual Export Pick-Up Date:
Requested Delivery Date: ImpTab b.Estimated Delivery Date:
Actual Delivery Date: ImpTab b.Actual Delivery Date:

Ocean

ETD :ExpTab 12b. ETD:
ATD :ExpTab 12c. ATD:
ETA :ExpTab 14b. ETA:
ATA :ExpTab 14c. ATA:
Estimate Collection Date: ContTab for FCL shipment, GenTab 9. Estimated Export Pick-Up Date: for LCL
Actual Collection Date: ContTab for FCL shipment, GenTab 10. Actual Export Pick-Up Date: for LCL
Requested Delivery Date: ContTab for FCL shipment, ImpTab 10. Estimated Delivery Date: for LCL
Actual Delivery Date: ContTab for FCL shipment, ImpTab 11. Actual Delivery Date: for LCL


Truck

ETD :GenTab 9. Estimated Export Pick-Up Date:
ATD :GenTab 10. Actual Export Pick-Up Date:
ETA :GenTab x. Estimated Delivery:
ATA :GenTab y. Actual Delivery:
Estimate Collection Date: GenTab 9. Estimated Export Pick-Up Date:
Actual Collection Date: GenTab 10. Actual Export Pick-Up Date:
Requested Delivery Date: GenTab x. Estimated Delivery:
Actual Delivery Date: GenTab y. Actual Delivery:

Report output

  • Show record() count on the report to indicate that how many shipments per mode

Figures

Figure 1. Main report

File:MainReport.JPG


Figure 2. Transportation Filters

File:TransportModeFilter.JPG


Figure 3. Date Filters

File:DateFilter.JPG

Tweaks

tw1) remove Go back button from the where Is top bar. -- Tira 11:20 AM 28 July 2009 (UTC)

Note: Feedback from Simon on Oct2, 2009 -- Tira 9:10 AM 3 Oct 2009 (UTC)

tw2) Main Report: Default selected output list in the combo box as list below:

  • Shipper
  • Consignee
  • Mode
  • Departure
  • Destination
  • Chargeable Weight --> Remove from default output back to the list -- Tira 11:45 AM 16 Jan 2010
  • Actual Departure Date
  • Actual Arrival Date
  • Actual Delivery Date

The rest of the list should be in default dropdown

tw3) Main Report: Update label names:

  • from "Departure Estimated Date" to "Estimated Departure Date"
  • from "Departure Actual Date" to "Actual Departure Date"
  • from "Arrival Estimated Date" to "Estimated Arrival Date"
  • from "Arrival Actual Date" to "Actual Arrival Date"

tw4) Main and In-transit Report: Show/hide Client Companies list filter. When there is only client company in the filter, this filter section should be invisible. If there is more than one client companies, this filter becomes visible.

Tweaks version 1.1.a

Note: tweaks below applies to both Main and In-transit report Tira 9:50 28 Oct 2009

tw1) Add summary shipment record() count on the report to indicate that how many shipments...

tw2) Create a HTML result page before excel report

tw3) Create download to excel button -> generate xls report

Tweak version 1.1.b

tw1) Main Report - List of Transport Mode (filter) MUST include "UNDEFINED" as well in order to see Undefined shipments -- Tira 11:00 AM Feb 2, 2010

RFC

rfc1) Simon would like to have dynamic filters for Client App by setting filters in Admin Mode for Non-jaguar Users -- Tira 12:33PM 19 Aug 2009 (UTC)

Personal tools