Air M Manifest

From UG

Contents 1 Ver 1.0 2 Ver 2.0 3 Ver 2.1 4 Ver 2.2

Ver 1.0

• 1) this is for "Doc Center" tab on Master
• 2) no group logic here - no option to pick and choose CT - no "Group generate" button
• 3)
  • template: http://mantis.jaguarfreight.com/svn/ct2/SS/ops/pdfs/air_master/air_cargo_manifest/ACM_template.JPG
  • example: http://mantis.jaguarfreight.com/svn/ct2/SS/ops/pdfs/air_master/air_cargo_manifest/ACM_example.JPG

Ver 2.0

[cm1] Replace ExpRefNum (CT.GenTab.A) with M.GenTab.MasterShipperRef.
[cm2] Commodity in template must be fixed 2 line tall text area. Delete what doesnt fit when pull   from CT rec. Do not show in pdf more than 2 lines.
[cm3] In pdf: Commodity size in pdf must be 2 times as wide as Shipper size
[cm4] In pdf: Delete CT# column
[cm5] In pdf reorder columns: HAWB#, PCS, Gross kg, Shipper, Consignee, Commodity
[cm6] Change Layout of this doc from Portrait to Landscape

Ver 2.1

• ss1) For each CT "Commodity:" textarea could have 1 or 2 or 3 or 4 lines. On pdf should print as it is in text area. For example if there are 2 lines for CT#x and 1 line for CT#y and CT#y follows CT#x on template THEN print 2 lines for CT#x then 1 line for CT#y.--Alex 22:26, 7 August 2009 (UTC)

Ver 2.2

• increase the address box (SHIPPER: and CONSIGNEE:) to 6 lines instead of the current 3 AND ALSO stretch the address box left to right to allow more characters per line.