EDI with Trendset

From UG

Revision as of 18:29, 10 April 2012 by Denise (Talk | contribs)
Jump to: navigation, search


Contents

Info

Mantis: * 0002996: [EDI with Trendset] .... <project>

Link to Requirements/SOWs: EDI with Trendset

Link to User Guide: UG:Trendset_USER_GUIDE

Mantis category: Acc:Trendset

! Please note that there are a lot of useful email communication posted into Mantis notes under 2996

Scope:

This wiki covers Trendset EDI project.

Trendset contact:

Freight Payment:

  • carriersupport@trendsetinc.com

Implementation:

  • lisa.shampine@trendsetinc.com

Payment Information

Requirements from Elizabeth Arden

Core requirements

Core requirements are summarized in the following letter from Arden.

Letter from Tammy

From: Mowbray, Tammy M [1]

Sent: Friday, June 24, 2011 4:59 PM

To: Robert Link; Marc Selter; Philippe Delorme; Denise Guastella

Cc: Falls, Jessie

Subject: FREIGHT BILL AUDIT AND PAYMENT TRANSITION TO TRENDSET


All,

As many of you are aware, EA will be transitioning our freight bill audit and payment process to Trendset, a 3rd party freight bill payment company. We will be transitioning the business in phases and Elizabeth Arden would like for Jaguar invoices for imports, domestic inland and non Zug export (Australia, New Zealand, South Africa and Puerto Rico) to transition on 8/1/11 via EDI. Elizabeth Arden requests that Jaguar work directly with Trendset to start EDI testing immediately and the direct contact information is listed below. Trendset has also sent EDI specifications to Jaguar.


Since Jaguar is one of EA's biggest carriers and therefore will have a largest impact on this transition, I wanted to advise of a few key elements that need to be taken into consideration to ensure the transition is seamless.


1. Paper Invoices: Will continue to be sent to EA until Jaguar can complete EDI testing with Trendset and receive final approval to start from EA.

2. Inland Domestic Invoices: Will need to receive one per shipment vs current consolidated invoices (or have the two IT teams work out). EA will need to have a record of each shipment and cost per each shipment to be visible in TS, no exceptions. This is required for EA financial reporting.

3. Main reference fields: Will need Jaguar to transmit the "load number" as the bill of lading number for domestic inbound shipments, and the "ct ref. number" as the bill of lading number for both imports and exports.

4. Invoice Timing: Need invoices sent asap to avoid gaps in accrual process. Please advise how this works for each type of shipment (imports, exports and domestic inland). When will the EDI transmission be sent, at shipment time, receipt time or when?

Please advise of any questions or concerns regarding the 8/1 go live EDI date.

TRENDSET INFORMATION:

TRENDSET EDI CONTACT: Lisa Shampine at 864-297-9255, or email lisa.shampine@trendsetinc.com.


Once the EDI process starts, your contact person at Trendset for questions concerning freight payments will be Trendset Carrier Services at 864-527-4395 or carriersupport@trendsetinc.com.

Payment information is also available upon registration, on their carrier website www.trendsetcarriers.com <http://www.trendsetcarriers.com/> [^] .


Regards,

Tammy Mowbray Director of Transportation

Implementation requirements from Trendset

Implementation requirements from Trendset are very well summarized in the following letter from Lisa.

From: Lisa Shampine [2]

Sent: Wed 6/15/2011 1:58 PM

To: Alex Dobrovolsky

Subject: EDI with Elizabeth Arden

Hello from the E-Commerce team at Trendset, Inc. Trendset would like to receive EDI for our mutual client Elizabeth Arden. Attached you will find a list of valid EDI locations for Elizabeth Arden and Trendset's 210 specifications.


Receiver ID - TRN200115

Receiver ID Qualifier - ZZ

Location Code - See attached

Location Code Qualifier - ZZ (Location codes should be placed in the N104 of the shipper segment for prepaid and 3rd party shipments, and in the N104 of the consignee segment for collect shipments)

Type of invoices to be sent EDI - Prepaid, Collect, 3rd Party

If you have round trip or multi stop shipments please include those in your test files.

Segment Terminator - "~" (HEX 7E)

During testing the ISA15 should be a "T". Once approved for production it should be changed to a "P".

      • All invoices transmitted during testing will not be loaded into the Trendset production database unless otherwise notified by the carrier to do so. Please continue to send paper until all testing has been completed and a production notification has been sent.


We will need the following information prior to receiving your first test file. 

1. Your company's SCAC Code
2. Name and email of person to received EDI Rejection notices
3. Transmission method (VAN, FTP)

4. Will you have any multi stop invoices?

5. Your sender id and qualifier

Please let us know if you have any questions. Thanks and Have a Great Day!

Lisa Shampine

EDI Analyst

Trendset Inc

864-527-4392

lisa.shampine@trendsetinc.com<mailto:brian.adams@trendsetinc.com>

EDI TO TRENDSET

Business Process

Current Process that JFS handles EA billing

Mantis: 3172

1) Trucking Company send an operator a list of shipments (CTs) that delivered on the day before (daily)

2) Jaguar will group CTs together in the master> Misc tab> Trucking Biling Manifest(each day for the billing between Jewels and JG)

3) Jaguar checks the shipments that delivered the day before (group) (from the list that the Trucker gave to them) and enter all necessary information such as rate, min, max info, fuel...etc

4) Jaguar generates a Trucking Billing Manifest and save the spreadsheet on their local machine, then Jaguar adjusts information (fuel, weight...etc) then sends it to the Trucker to review (This process is between Jaguar and the trucker for the billing purpose). Please note that this process is nothing to do with Arden.

5) Once trucker review the numbers until it is correct, then trucker send it back to Jaguar for the cost that they will bill Jaguar. At this point Jaguar will use this information as the based information and mark up the cost on top of what Jaguar get billed to Arden to make some profit. Jaguar manually calculates and marks up number for Elizabeth Arden. This spreadsheet is worth for one day of delivery. Jaguar holds on the spreadsheet with the mark up price each day and wait to combine with 5 days of spreadsheets to send to Arden one time.

6) Jaguar has to repeat the process 1) -5) for each day for the shipment that delivered each day. They save these spreadsheet on their local machine (Monday to Friday worth of data)

7) Next Monday, Jaguar has to invoice Elizabeth Arden, Jaguar creates a sale invoice from Invoice tab. This invoice is worth for 5 days shipments from the week before. The total cost will cover all 5 days shipments.

8) Jaguar submit the invoice (1 invoice covered for 5 days of shipments) and the Trucking Billing Manifest (5 days) together to Arden. (Invoice is the cost that Arden has to pay, and Trucking Billing Manifest is the detail of shipments that shipped for this invoice; back up detail information for the invoice)


New Process that has to be changed

As we will transmit the invoice and the trucking billing manifest via EDI daily. We will need to map these info together. Trucking Billing Manifest, JFS has to only generate one spreadsheet for daily shipments (1 excel spreadsheet = 1 day of shipments:1 excel for 1 Master);

  • This spreadsheet consists of all the shipments and all the loads that picked up and delivered the day before(daily)
  • JFS has to be able to manual edit data(mark up detail cost) on the spreadsheet before uploading to the system then transmit the information via EDI with the Sale Invoice.
  • System will automatically create an invoice per load. If this spreadsheet consist of 10 loads, that means 10 invoices will be automatically generated by the system
  • Each load consists of one or more shipments (CTs)
  • The part before uploading the spreadsheet to the system, it still involves manual process for JFS to prepare final data on the spreadsheet on local machine before uploading.
  • Once the spreadsheet is ready, JFS can upload the spreadsheet to the system and system can map the data from the uploaded spreadsheet.
  • After uploading spreadsheet, JFS should be able to review the info that was uploaded then ask system to generate invoices from the master.
  • Transmit to trendset via EDI


Requirements

  • see example about mapping from Trendset at note 0010498 from 2996
  • See attached file TRENDSET-EDI210.doc on the mantis 2996 for the schema
  • Additional info that need to map and submit to Trendset:
  • Invoice # from 210 map to Jaguar Invoice (sale invoice): Invoice Number ie. US20572
  • Pro# from 210 map to Jaguar Invoice number with an alpha Character appended to the end. ie. US20572a, US20572b, US 20572c...etc (each alpha character presents each load.
  • BOL# form 210 map to Jaguar load number
  • Step of invoice process
  • Ability for upload, generate invoices, credit notes issue, and transmit invoices to trendset (Trendset Location)
    • Trendset tab should be available for only Master that use this feature
  • Provide an ability for user to upload the spreadsheet
    • This is implemented on Trendset Tab Master level
  • Provide an ability for user to review the uploaded information in HTML format before user clicks "generate Sale Invoice"
    • This is implemented on Trendset Tab Master level
    • Show Gross weight in both KG and LB
    • Value for Gross Weight, Freight Total, Fuel Total, Total MUST be 2 decimal
    • For the CTs in the same load -> show one line with all CTs# listed.
    • Show Total number of Freight Total, Fuel Total, and Total amount as these info can be easily review before generating invoices
    • Each column can be sortable decending/ascending
    • View result - default should be descending for load number
    • Add Hyperlink for every CT# to link to CT# edit page
  • Provide an ability for user to click "generate Invoices"
    • This is implemented on Trendset Tab Master level
  • System generates invoices from the upload spreadsheet (one invoice per one load)
    • System checks a format of spreadsheet as well as all required fields
    • Invoices will be created by system - this can be view under the CT level on Inv tab or Master level on Profit/Loss tab
  • Provide "Transmit" button - EDI to Trendset
    • This is implemented with ANSI standard code submit to Trendset via FTP
  • Note: Trucking Billing Manifest info consist of CT#, Load#, Ttl Plts, Ttl Pkgs, Ttl Loose, Gross Weight, Freight total, Fuel, Total, From, Origin City, Origin State, Origin Zip, Origin Country, To, Dest city, Dest State, Dest zip, and Dest country
  • Data send via EDI should include Invoice#, BOL#, and Pro#. System should generate these data from the condition above.
  • CT level --> Inv Tab
  • There is 2 more columns added to Invoice table:
    • Sent to trendset - Check box (blank - not sent, checked - sent to trendset)
    • Trendset status - Accepted or Rejected
  • Master level --> Profit/Loss Tab
  • There is 2 more columns added to Invoice table:
    • Sent to trendset - Check box (blank - not sent, checked - sent to trendset)
    • Trendset status - Accepted or Rejected
    • These 2 columns should only appear on those tabs for the shipments that are submitted through trendset

It should show those 2 for only shipment that submitted throught trendset.

  • Invoice
  • Re-upload spreadsheet in case of wrong file
  • [TBD]
  • E-mail notification to users when it passed/failed for transmitting to Trendset
  • Admin requirements:
  • Admin > Acc > Trendset --> manage config
    • Criteria - what CTs are invoiced through Trendset
      • E0.Client company - This can be one or multiselected
      • Export Pick up Trucker - This can be one or multiselected
      • Bill to party - To address the invoices
      • Connection (FTP)
        • Accept Trendset Updates with ability for Trendset updates frequency in seconds
        • Send to and receive from (address, Login, Password)
      • Email Notification
        • Jag User - this can be more than one person (option to select the users who will receive notification)
          • dropdown: User name and email address
        • Notify users when:
          • invoice failed/rejected [Y/N]
          • Invoice passed/accepted [Y/N]
  • Issue credit note (TBD - for how to submit it to Trendset) - Need to confirm with MO first
  • Log of submission file
  • Who submits the file
  • Date and Time to submit the file
  • status of submitting the file

Invoice Mapping

  • Mapping for automatically invoices creation
  • Overall mapping is the same as usual manually invoice generation
  • Bill to party
  • Control this from Admin for the bill to party address
  • File Ref
  • Mapping: CT_bo#Import_Ref
  • Import Ref is taken from one of load's shipments as same load number = same Import Ref#
  • Container No(s)
  • CC#, Description,Currency, Amount
  • Mapping 1st line: 1505 (CC) Domestic Trucking (Desc) USD (currency) Amount (number)
  • Mapping 2nd line: 1506 (CC) Trucking Fuel Surcharge (Desc) USD (currency) Amount (number)
  • Sub-Total
  • calculation result (formula)
  • Total invoice
  • calculation result (formula)
  • Invoice amount should be consistent between the number on spreadsheet and on the Profit and Loss as well as invoices.

Additional Information

  • FTP folders
  • The invoices JFS send to Trendset is placed in the OUTBOUND folder
  • The 997 messages is placed in the INBOUND folder.
    • Each 997 message received, it should be deleted to avoid confusion.
    • 997 is a standard ANSI X12 997 V 4010.
    • Frequency: The 997s should be available a couple hours after JFS send data.
      • Note: It can take up to 6 hours, depending on how busy our system can get.
    • 997s are meant to be reconciled in our system back to what JFS sent Trendset. They don’t acknowledge the actual invoices, they acknowledge the transaction sets JFS has sent to Trendset. Trendset advised us below: 
It’s a fine distinction, but there is a difference.

ISA*00*          *00*          *ZZ*TRN200115      *02*JAFR           *111021*1301*U*00401*000000005*0*T*>
GS*FA*TRN200115*JAFR*20111021*1301*0005*X*004010
ST*997*0005
AK1*IM*001  //acknowledging the GS control number you sent us
AK2*210*0001  //acknowledging the ST control number in the above reference GS control envelope
AK5*A  //status of transaction set
AK9*A*1*1*1  //Transaction sets received in the GS envelope acknowledged.
SE*6*0005
ST*997*0006
AK1*IM*001
AK2*210*0001
AK5*A
AK9*A*1*1*1
SE*6*0006
GE*2*0005
IEA*1*000000005

Per Lisa's suggestion: In order to use 997s effectively, we need to have our system increment the GS control number sequentially each time we send  
Trendset a file. (By rights, the  ISA control number should increment also, but Trendset is not doing sequence checking on that envelope, and it has no  
effect on the 997 sent back.)


  • Question to Trendset: if we submit the same invoice information twice or more than 2 times, will it cost anything on your end? Even though it is the same file. Your system will check whether it is a same file? We are implementing the submission ability for operator to click transmit to Trendset. However, if the file is failed of course we have to re-submit it.Please let us know. Thank you.
  • Answer from Trendset: When we load the file in the system, we look to see if the Pro# (the value you’re sending us in the B302) is already there. If the pro# is already there, the loader checks to see if the invoice is in reject status. If the invoice is already there, but not rejected, the loader will not load the second transmission of the pro#. If the invoice is already there, but has been rejected for whatever reason, the loader will load the 2nd transmission of the invoice and over-write the original one.
  • Conclusion: no harm on Trendset end

Questions regard Trendset System, contact:

  • carriersupport@trendsetinc.com // 864-527-4395

Test environment 

Trendset ftp: ftp.trendsetinc.com
Login: jafrftp
Password: jafrtsi

Production environment

Step by step

Step 1 and Step 2

File:Step1and2.JPG

Step 3

File:Step3.JPG

Step 4 --> this it the process that will be needed to submit via the system (EDI)

File:SystemAutomateInv.JPG


Please note that system should provide ability to upload, download, review, and transmit option

Admin

File:TrendsetAdmin.JPG

E-mail Notification

  • Should be done in Config so the change can be made with out the release required.

Rejected Notification from Trendset 

 From: cybertrax@jaguarfreight.com <System e-mail> 
 Sent: Friday, October 28, 2011, 5:44 PM
 To: montira@jaguarfreight.com <this is the operator who transmitted the invoices>
 Subject: Trendset Reject notification for invoice US22159 <invoice number>



 Dear Montira <this is the operator who transmitted the invoices>,

 
 Invoice US22159 <invoice number> was rejected. Please review and re-transmit it.

 To view this invoice online, please follow this link: US22159 <invoice# hyperlink>
 This invoice is for the load number: LD000000000234 <load number> 
 This load consists of CT11111, CT11112, CT11113 <CTs number hyperlinks>


 Rejected: <code message- translate to understandable message for operator to  
 understand why it is rejected>


 Please do not reply to this message as it is not an actively monitored e-mail   
 address. --> <bold and Italic>


 

 Kind Regards,
 
 EA USA Domestic Team
 at
 Jaguar Freight Services
 10 Fifth Street 3rd floor
 Valley Stream, NY 11581
 Tel:  +1 516-239-1900
 Fax: +1 516-239-6300
 www.jaguarfreight.com


 Jaguar Freight does not provide cargo marine insurance unless specifically 
 requested and confirmed in writing.
 
 Please note that all business is transacted subject to our general business terms 
 and conditions, a copy of which is available upon request.

Accepted Notification from Trendset 

 From: cybertrax@jaguarfreight.com <System e-mail> 
 Sent: Friday, October 28, 2011, 5:44 PM
 To: montira@jaguarfreight.com <this is the operator who transmitted the invoices>
 Subject: Trendset Accept notification for invoice US22159 <invoice number>



 Dear Montira <this is the operator who transmitted the invoices>,

 
 Invoice US22159 <invoice number> was accepted
 
 To view this invoice online, please follow this link: US22159 <invoice# hyperlink>
 This invoice is for the load number: LD000000000234 <load number>
 This load consists of CT11111, CT11112, CT11113 <CTs hyperlinks>


 Please do not reply to this message as it is not an actively monitored e-mail address. --> <bold and Italic>


 

 Kind Regards,
 
 EA USA Domestic Team
 at
 Jaguar Freight Services
 10 Fifth Street 3rd floor
 Valley Stream, NY 11581
 Tel:  +1 516-239-1900
 Fax: +1 516-239-6300
 www.jaguarfreight.com


 Jaguar Freight does not provide cargo marine insurance unless specifically requested and confirmed in writing.
 
 Please note that all business is transacted subject to our general business terms and conditions, a copy of which is available upon request.


SOW 1

0003250: [EDI with Trendset] Add validations and functionality to handle various invoicing errors (SOW1)

Add Validation: during the upload for Trucking Billing Manifest and reject the upload if found

  • Freight Total and Fuel Total cannot be zero
  • Load Number from the uploading spreadsheet cannot be duplicated with load number that has already transmitted to Trendset
  • Load Number on Spreadsheet to upload MUST match with the actual Load number in the system (CT > GenTab >Load Number), not allow to upload if the load number on spreadsheet do not match what system has
  • CTs to upload MUST be a part of that particular master
  • Validate these columns on Manifest in order
  • CT#
  • Load#
  • From
  • Ttl Plts
  • Ttl Pkgs on Plts
  • Ttl Loose Pkgs
  • Gross Weight
  • Freight Total
  • Fuel Total
  • Total
  • Origin City
  • Origin State
  • Origin Zip
  • Origin Country
  • To
  • Dest City
  • Dest State
  • Destination Zip
  • Destination Country
  • Display Error pop-up message if validation is failed and reject the upload

Add Functionality to handle various invoicing errors

Use cases:

  • CT was part of Master (Manifest) by mistake and was billed by mistake
  • CT was omitted and has to be added to Master (Manifest) and billed
  • Incorrect amounts posted for specific CTs
  • CT was a part of the load and master then later the CT has been removed from the master and a different load has been assigned (case of a CT is a part of the load did not get picked up as it was supposed to)
  • User has to issue credit note against that particular invoice
  • System should automatically discover what CTs are in the load

Steps to handle use cases:

  • Generate credit note invoice for the correct amount, load and CTs that are a part of the load and transmit to Trendset
  • This will help on Trendset end to understand about the incorrect invoice and cancel it out
  • Provide "Credit Note Issue" button
  • Pop-up review read-only information for the credit note such as "specific charge code can be use", "container field contains load#", etc
  • Provide ability for Auto and manual generate invoice and credit note
  • Question: should we use the standard credit note issue process to receive an approval before it can be generated and transmitted?
    • Answer: yes. all credit notes either from manual or auto generates should still require approval process from the team leader (the current process we have for the credit note for manual CN generate)
  • Generate invoice with correct CTs, load# and amount and send transmit to Trendset
  • Provide ability for operator to generate invoice from a master Inv tab and transmit
  • Remove CT from the master
  • Removed CT should be removed from Trucking Billing Manifest review

NOTE:

  • System should not allow to generate partial amount credit note as it can confuse Trendset

Change name "Trendset" to "Inv" tab

  • This tab consists of:
  • Upload revised Manifest
    • Manifest HTML view Table to review after the upload successfully (same as what currently have)
      • This should have all required information to make a decision about "Generate&Transmit"
  • Merge Operation of "Generate" and "Transmit" invoices
    • This button should be locked once user clicks "Generate and Transmit" (Allow to click one time)
  • Table of Invoice generated (Similar to invoice table in CT level)
  • Ability to generate "Issue New Invoice" from master should be provided just for "Trendset Enabled Masters"
  • Ability to generate/transmit/credit note invoice from CTs applies to CT level on Inv tab for only shipment that has "Trendset Enabled feature" with a fix template for specific charge code...etc

Remove "Issue Credit Note" button from P/L tab

  • Keep P/L tab alone as a report
  • Issue credit note should be provided under Inv tab in Master

Log

  • All actions MUST be log on the CT update log , Master log, and system log

Additional information for Trendset Credit Note issue

  • How Trendset will know which Credit Note issue against which invoice as CyberTrax generate Credit note with incremental number of invoice which is not the same as the original invoice number?
  • Trendset can accept Credit note invoices as long as CyberTrax send a CA in the B308 for 210 mapping file, and all of the dollar amounts are negative

SOW 2

* 0003296: [EDI with Trendset] Send Freight total and Fuel Total in separated lines instead of one total amount

Change Request for Transaction Set 210, Motor Carrier Freight Details:

  • Sending Freight and Fuel amount separately to be able to display on Trendset end invoices submit to Elizabeth Arden
  • Add LT in the R304 for the LTL mode(Trucking): R3*JAFR*O**LT
  • This will help Trendset to rate correctly

Mapping to:

  • Freight goes on 1 line item; it does not require a charge code.The code for Freight is 400.
  • Fuel goes on a separate line item; the charge code (which goes in the L108) will be FUE.

SOW 3

* 0003332: [EDI with Trendset] store files on our ftp for investigation needed

As Trendset takes the files from the FTP and empty it, the files are no longer with us

  • Request to add an ability to store files that are transmitted to Trendset for future investigation need

SOW 4

* 0003363: [EDI with Trendset] Truck Dom: change mapping 210 from the ‘shipper’ and ‘consignee’ info to the ‘pick up’ and ‘deliver to’ location

  • Do not change the mapping for the CyberTrax invoice (pdf) - keep the way it is
  • Change the mapping on XML file to send to Trendset only, so that Trendset can show Pick-up and Delivery location on the invoice that they send to EA the way EA would like to see.
  • Solution:
  • Should be a solution that we can manage through admin so this can be easier to know what data we send to Trendset (mapping)
    • 1) Provide a checkbox/option for XML mapping 
[ ] Pick up Location and Delivery Location to Shipper and Consignee(Trendset) for XML
[ ] Shipper and Consignee to Shipper and Consignee(Trendset) for XML
    • OR 2) Provide a dropdown list option for what to map to Shipper and Consignee for XML
    • OR other better solution, please advice and provide feedback
  • Note to CT2Support team to update this information to help page

SOW 5

* 0003418: [EDI with Trendset] Sending the test invoices to receiver ID TRN200115TST

  • Changing admin part for trendset test/production properties
  • This information will be stored in application properties files
  • In Trendset admin it will be in read-only mode

SOW 6

0003529: Mapping changes needed on 210

  • Change the mapping on Ansi(XML) file we send to Trendset for weight
    • Grab and pass LB weight from from Invoice field
      • Kgs not needed for trucking domestic Invoices

SOW 7

0003529: Mapping changes needed on 210

Solution Architect Notes

Add validation: Freight Total and Fuel Total Can not be 0

Validate these columns on manifest at the moment of upload and reject upload if found

Add functionality to handle various invoicing errors

Use cases:

  • CT was part of Master (Manifest) by mistake and was billed by mistake
  • CT was omitted and has to be added to Master (Manifest) and billed
  • Incorrect amounts posted for specific CTs

Merge operation of "Generate" and "Transmit" (invoices)

There is no reason to have a gap in time between these 2 operations. If better review is needed after or before "Generate Inv&Transmit from Manifest" is pressed then system can provide info in more convenient form. But it is believed that Manifest HTML view has all required info to make a decision about "Generate&Transmit".


Solution 1

Do not allow to re-upload manifests after invoices has been generated.

  • Use standard Inv/CN capability
    • Credit note functionality should be standard to allow for partial credit and editing TOC
    • Ability to create invoices from Master should be added (just for "Trendset enabled Masters")
    • Ability to create/transmit invoices/cr notes from CTs should be added (just for "Trendset enabled Masters") OPTIONAL-NEED MORE RESEARCH
    • For uniformity rename "Trendset" tab into "Inv" tab
    • Trendset invoices should comply with "Trendset format" such as "only specific CC could be used", "CONTAINER field contains load#"
  • Allow "Generate Inv&Transmit from Manifest" only one time. All errors should be fixed by using standard Inv/CN functionality
    • move issue Cr Note button from Master P/L tab to Master Inv tab
  • Involve Sa who dev Inv/CN

Solution 2

Allow to re-upload manifests after invoices has been generated.

Let operator upload revised Manifest. System should be smart enough to analyze and discover what CNs, Invs to issue and will issue them automatically. Must first post it into "Preview screen".

Solution 3

Allow to re-upload manifests after invoices has been generated.

Create another non standard but convenient interface to handle invoicing errors.

History

See xls attached to http://ct.jaguarfreight.com/mantis/view.php?id=3042

Mantis

  • Translate message for content email (passed/failed) notification
  • See 3212
  • Spec is updated: Y

Mantis

  • Credit Note (Master) - All invoices in Master
  • See 3211
  • Spec is updated: N

Mantis

  • Hyperlink for CTs# on View upload
  • See 3224
  • Spec is updated: N

Mantis

  • Each column should be sortable (Descending and ascending)and view result - default should be descending for load number
  • See 3243
  • Spec is updated: Y

Mantis

  • Invoice: Maping File Ref# field on invoice with GenTab>B.Import Ref#.
  • See 3248
  • Spec is updated: Y

Mantis

  • Send Freight total and Fuel Total in separated lines instead of one total amount SOW 2
  • See 3296
  • Spec is update: Y

Mantis

  • store files on our ftp for investigation needed SOW 3
  • See 3332
  • Spec is updated: Y

Mantis

  • Send Pick-up and Delivery location in shipper and consignee mapping 210 in the file ONLY to Trendset.SOW 4
  • CyberTrax- invoice mapping for shipper consignee stay the same!
  • See 3363
  • Spec is update: Y

Mantis

  • Sending the test invoices to receiver ID TRN200115TST
  • See 3418
  • Spec is updated: Y

User Guide

Section 1

Figure 1. Generate Spreadsheet from Misc tab in Master Level

File:TruckBillManifestForMaster.JPG

  • User checks value calculation and submit to Jewels Transportation to review all the rates.
  • If the number is incorrect, adjust and resend to Jewels Transportation to sign off/approve on it
  • Jewels approves then user will reuse the spreadsheet and mark up the rate in order to bill EA
  • Remove the Rate and Fuel columns before submit it to EA. See #Figure 2. Final Spreadsheet

Figure 2. Final Spreadsheet

File:UploadButton.JPG

  • Once user clicks "Upload Revised Manifest" then clicks "Brownse" for a file to upload then clicks "Upload"

File:Upload.JPG

Figure 3. HTML view for upload value

File:ViewHTML.JPG

  • Once reviews and everything looks good then clicks "Generate Invoices"

Section 2

User Guide Status and SOW covered

  • Up to date? N
  • SOW Covered: SOW X
Retrieved from "https://wiki.jaguarfreight.com/EDI_with_Trendset"
Personal tools