GMS

From UG

Revision as of 17:19, 27 March 2012 by Alex (Talk | contribs)

(diff) ← Older revision | Current revision (diff) | Newer revision → (diff)

Jump to: navigation, search

GMS

Info

Mantis

0003321 [Profit Sharing Module]

Scope

Covers this one module - Profit Sharing Module.

Glossary

Business Requirements 1

See GM Split Requirements.

OC Functionality

OC status

At some point in the life of a shipment record it will not be updated anymore. Moreover some updates would become harmful. Therefore, certain types of functionality should be blocked for "old/mature" records. This would prevent undesirable situations such as:

altering shipment weight after invoices has been issued
issuing invoice before all PI/SI are in
etc

Record that have limited functionality as far as updates/etc is called "closed" and should have status "closed". Otherwise it is "open".

We call this status "OC status" - (Open/Closed) status.

Closing Time Frame

We need a table in the system that defines how many days shipment should stay open since it was created.

For every MOT this number is different.

Typical values:

Air - 35 days
FCL - 60 days
LCL - 70 days
Truck (all 3 sub-modes) - 35 days

Number of days is editable field.

Set default as 1000.

Add this to User Access table.

OC Status Values

n/a

for CTs closed before 2012

open

for new CTs or manually re-opened CTs

manually open

for CTs that were manually opened by user

closed

for CTs that are closed

There are three ways to set this status: automatically, manually and by script.

Setting OC status automatically

When new shipment is created its status is automatically "open".

Closed CT condition

When the number of days between Actual Date Of Departure Arrival and today's day becomes equal to 
#Closing Time Frame CT is said to satisfy "closed" condition.

OC process

OC Process is a process that runs periodically and updates "OC status" and "GMS status":
- it checks on all "open" CTs to see if they can be set as "closed but not delivered" or "closed and delivered"
- it checks on all "closed but not delivered" and see if now they can be set as "closed and delivered"
- also if it is changing CT status to "closed and delivered" then it will also set GMS status to "pending" from "not ready"

Currently it is defined to run once a day (maybe defined in Admin)

Setting OC status manually

We need to provide functionality to manually:

set status to "closed" on open and manually open CTs
set status to "mannually open" on closed CTs (user who opened CT manually must close CT manually)

This is subject to user access permissions.

Suggested implementation: add "Close/Open file" button to P/L Tab.

Closed CT have different permissions

CT (file) that has "closed" status should limit what operators can do with record.

See #Viewer for CT, Master and Group

Setting OC status by script

All CTs that would close prior to Jan 1, 2012 (if this functionality would be available since the beginning) should have status "n/a"

Tech Note
--------
To achieve above we need to write and run appropriate scripts prior Release !

Display OC status on Gen Tab

Opening and Closing shipments when Groups and Masters are involved

In general, we want to have Master or Group to be consistent in terms of open/close status. It means:

Master/Group has open status if and only if 
       every CT inside of that Master/Group has open status.
Master/Group has closed status if and only if 
       every CT inside of that Master/Group has closed status.

Closing

CT that is a part of a Group or/and of the Master can be closed only when ALL CTs in that Group or Master can be closed based on the individual time frames.

In case of automatic closing System would have to wait for all CTs to "mature" in terms of timeframes.

In case of manual closing System should give a warning to the user that all CTs (in related M/GRP) are going to be closed.

Opening

In case of manual opening System should give a warning to the user that all CTs (in related M/GRP) would be opened.

Viewer for CT, Master and Group

should mimic look and feel/layout for editors
block all functionality that would affect GM Split (editing records, adding CTs to Master, etc)

Interface to manually "open" and "close" CTs

"Open/close" button on P/L tab
This is subject to access table
Log who/when opened/closed

Block altering of the "closed" CT/Master/Group

For users who have no ability to open manually system should display error explaining why edit is not possible and suggest "view" instead.

DR report to show all manually opened CTs in the system

Lev 1: counter - how many CTs have status "manually" open
Lev 2: xls (if no extra time); sortable HTML with xls option (if enough time); Columns:
- CT# (hyperlink)
- Client
- who manually opened
- when manually opened

DR report for closed files without a delivery status

This report should show all CTs that have #OC_Status_Values = closed but not delivered

Lev 1: counter
Lev 2: xls (if no extra time); sortable HTML with xls option (if enough time); Columns:
- CT# (hyperlink)
- Client
- Days since closed

GMS functionality

Prerequisites for GMS calculations

In order to calculate GMS Split we need the following to be defined for the record:

OO
EO
IO
TO
GMS ratio
GMS schedule

Owners Office

Owners Office (OO) is a field (attribute) that identify what Jaguar office is the OO for particular Client Company - see Client Companies.

Relationship is one to one.

Add this to "Part A." section on UI.

Make sure changes are posted into Log.

Import, Export and Third Offices

EO, IO, TO are properties of CT and set on Gen Tab.

GMS section in Admin

Add number of configuration options - see below.

Add under Acc > GM Split.

GM Split Rules

See table below.

%-ages must be stored in the system.

Need a view of current %s.

User could edit %s.

One table is for default values and one for Client Company specific are required.

Add this as a property into User Access table.

Add changes to log.

One more GMS case

Business requested one more case see case#6 above.

Example:
00      =       NY
EO     =       HK
IO      =       UK
TO     =       none

GM ratio

More than one "GM ratio" (“percentage model”) could be applicable - more than one table as in Fig above could be defined.

Each case should have a name (optional, need textbox for that) and id generated by the system.

We should have one default "GM ratio", and then a number of alternative "GM ratio" (same scenarios, just different percentages). By default a Client Company would be subject to the ‘default’ model.

It means that "GM ratio" is a new property for Client Company entity.

Make sure changes are posted into Log.

Schedule for GM Split calculation

For example it would be possible to say that GM Split calculation will happen once a day at 17:00 EST

Credit to the office

Per Karen this is no longer needed

Limitations on pending GMS and closed files

Not required at least for this release

Log for GMS Admin Changes

Post all changes into Log.

Access Rights

Have only one item in User Access Rights table regulating GM Split Admin (all tabs).

GMS status

GMS (Global Marging Split) Statuses:

n/a

-GMS status for CTs that have OC status "closed before 2012". Need script - see below.

not ready

- default status for all new CTs

pending

- these CTs will be included into the next run of GM Splitter

- this status is set by #OC Process

success

- after system runs Global Margin Splitter on this CT system successfully must change status to "completed"

- set by GM Splitter

error: <reason>

- after system runs Global Margin Splitter on this CT system unsuccessfully; :- examples of <error>:

CT does not fall under any of GMS case;

closed but not delivered -CTs closed by user or system (satisfy #Closed CT condition) but do NOT satisfy "delivered CT" condition - see List_CTs#DELIVERED

-set by GM Splitter

Setting GM status by script

All CTs that would close prior to Jan 1, 2012 (if this functionality would be available since the beginning) should have GM status "n/a"

Tech Note
--------
To achieve above we need to write and run appropriate scripts prior Release !

GMS Splitter Process

This process runs periodically for example once a day.

Exact schedule would be defined here: #Schedule for GM Split calculation.

Forcing GMS Splitter to run immediately

This functionality is provided by button in a GMS Admin.

After process finished running it should provide report in pop-up describing:

how many and what CTs were processed
how many and what Consolidated Invoices were generated

Ideally post this into Log as well.

Steps for GMS Splitter

Look at all CTs with GMS status = "pending"

See if CT info is complete/correct:
- OO is defined
- OO/IO/EO/TO combination falls under cases defined in GMS Admin

If info is complete/correct then:
- calculate GM Split - see #GMS Algorithm
- issue invoices - see also #Invoices generated by GM Splitter
- post results into DB

Else set GMS status = "error"

GMS Algorithm

For every CT (subject to this algorithm):
- identify what GM case it belongs to (based on OO, IO, EO, TO values)
- calculate based on % defined in #GMS Section in Admin

Note: take into account previously issued internal invoices.

Example 1a

create: CT: Air, OO=NY, EO=NY, IO=HK, TO=none, with GMS case#: Case 1: (OO : US = 60%, A : HK = 40%)
set: NY issued/received 100 USD to Client
set: NY paid/posted 90 USD from Vendor
set: delivery date
close CT
verify: GMS status is set to: pending
run: GM Splitter
verify: P/L tab should show profits: 10USD for Jaguar, 6 for NY and 4 for HK
verify: Inv Tab should have: Indiv Inv for 4USD from HK to NY
verify: Consolidated Internal Invoices Report should have new invoice for 4USD from HK to NY

dev test: CT# 375464, AIR, AlexTest (ClientCompany)

Example 1b

For CT in 1a:

open CT
post 1USD purchase for NY
close
run splitter
verify: NY billed HK for 0.40 USD
verify new P/L

Example 1c

open CT
change GMS % to 50/50
close
run splitter
verify: HK billed NY for 0.90 USD
verify new P/L

Example 2

create CT with GMS Case 5: (OO : US = 100%)
close/deliver
run splitter
verify: no invoices has been generated

Example 3

Example 4

Invoices generated by GM Splitter

Number of invoices

There should be limited number of invoices issued each time Runner runs. It corresponds to num of unique pairs from the list of offices. In 2012 it would be:

NY/HK
NY/Lon
NY/Par
HK/Lon
HK/Par
Lon/Par

So every time it runs between 0 and 6 Consolidated Invoices would be generated.

Two types of Internal Invoices

System would continue registering and generating old types of Individual Internal Invoices (per CT or Group).

They would be generated automatically by the System.

Layout would stay the same.

Old functionality related to these invoices would be preserved (Inv Tab, P/L Tab, SearchInvoices, etc).

At the same time new Consolidated Invoices will be generated as well (by GMS Splitter).

Invoice numbering

New consolidated invoice should follow "old" sequence (as defined in Acc_CT_Tabs_Sales_or_Internal )

Individual Internal Invoices (per CT or Group) would follow this pattern:

<Related Consolidated Invoice>"-"<CT#>

Consolidated Invoices pattern:

"IIGMS"<office code><sequence>

Example:

Assume GM Splitter discovered only 2 CTs that are pending GMS.

for CT#555 office NY owes 10USD to office HK and
for CT#888 office HK owes 20USD to office NY

System would register:

one Consolidated Invoice IIGMSNY12345 from NY to HK for 10USD.
and two Individual Invoices:
- IIGMSHK12345-555 from HK to NY for 10USD
- IIGMSNY12345-888 from NY to HK for 20USD

Timing

Both Individual and consolidated invoices will be generated at the same time.

Consolidated Invoice Layout

See mock up below.

= Change to pdf layout

Sec A: post total amount / currency there

Sec B: this section should have table with the following columns:

   CT# - with hyperlink 
   Client Company (Added!!!) 
   GMScase - number and % 
   OO 
   EO 
   IO 
   TO 
   JF - USD P/L for JaguarFreight 
   US - USD P/L for this office 
   HK - USD P/L for this office 
   UK - USD P/L for this office 
   FR - USD P/L for this office

NOTE: above is defined under #CTs Processed by GM Splitter report

GM Splitter Log

This was estimated to be done in one workday.

This Log will be located on additional tab of "Gross Margin Split Admin"
It will be in the form of a table
Table will show latest runs at the top
Table will have columns (left to right):

Timestamp - date/time when process completed ()

User - user who run it (or say "schedule" if it was called by a scheduler)

Success - number of CTs successfully processed

Error - number of CTs that were rejected by this process

Consol II - list of consol invoice numbers generated (with a hyperlink)

CTs - link to "CTs Processed by GM Splitter" xls report - see below.

CTs Processed by GM Splitter report

This report provides detailed info about CTs processed by GM Splitter.
Sorted by "Status" and then by "CT#"
Columns:

Status - success or error

Reason - reason for error

CT# - with hyperlink

Client Company (Added!!!)

GMScase - number and %

OO

EO

IO

TO

JF - USD P/L for JaguarFreight

US - USD P/L for this office

HK - USD P/L for this office

UK - USD P/L for this office

FR - USD P/L for this office

Cons Inv - Cons Inv Num

II1 from - from office for Indiv Inv #1

II1 to - to office for Indiv Inv #1

II1 USD - amount for Indiv Inv #1

II2 from - from office for Indiv Inv #2

II2 to - to office for Indiv Inv #2

II2 USD - amount for Indiv Inv #2

CT Tabs

Inv Tab

No change.

P/L Tab

Add link to Consol Inv. See below.

Existing Acc Reports

We are changing the way we handle Internal Invoices. This could affect or even break some of the existing reports such as PnL Report for Multiple CTs (summary and detailed view).

Search Inv Report

P n L for Multiple CTs

Browser for Consolidated Internal Invoices

This module should provide basic capabilities to browse Consolidated Internal Invoices issued by the system.

We need at least core filters:

issuing date: from/to
issuing office

Paging and sorting are required.

GMS Misc

Display OO, EO, IO, GMS Status, GMS Case on Gen Tab

See mock up below, Red Box B.

UC: How to apply new GMS split rules to GMS completed CTs

'!!! Spec changed !!!

This is the case when we want to change GM Split %ages and apply them not only in the future GMS runs but also recalculate for CTs that have GMS status completed.

This can be achieved by changing OC status for such group of CTs from closed to open to closed. This will force GMS status to be "pending" and next time GMS Runner runs it will re-adjust GMS for these CTs.

This can be done just by user - no programming required.

Create DR report to identify all new shipments without an Owner Office

0003490: [GM Split ] Create DR report to identify all new shipments without an Owner Office

Info for E0 estimate

Core need: To identify early CTs that have Client Companies that do not have Owners Office set

Level one: counter
Level two: xls with 2 columns - CT#(with link) and Client Company

UC: CTs have different sets of IO/EO/TO

System must not allow groups in which 2 CTs have different sets of IO/EO/TO

UC: some CTs are "pending" GMS, some are "not ready"

System should wait until all CTs in the group are ready (they could be delivered at different times).

VAT should be excluded

Exclude VAT from P/L amount. Implications:

1) Exclude VAT from P/L on P/L tabs.

Consider VAT as only value entered on a sales side.

VAT related charge codes is something else - include them into P/L.

For Sales Inv section on P/L tab pls add 2 columns for clarity:

Amount minus VAT
USD Amount minus VAT

2) Exclude VAT from P/L amount calculated in GM Split

3) Exclude VAT from P/L amount on P/L reports.

Kostya let's discuss this.....

New business rules for currency conversion

When converting amounts to another currency (for P/L and GM Split!) use exchange rate defined on "departure date" for CT.

In case of groups used this date from any CY. We believe this date is same for all CTs in the group since group is always part of the Master.

Recalculate exiting records in case ratios has changed

Add option to GM Split Rules tab to recalculate exiting records in case ratios has changed

Do it for both client specific and global rules

Add "Recalculate CTs with departure date from" date - this is an option to consider when re-calculating. Place it on the tab. Required field.

On change prompt user: Recalculate? Y/N.

Recalculate during next GMS run.

Apply similar procedure if OO has changed.

DR to show all CTs that have GMS status error with a reason

level 1: counter
level 2: xls with columns: CT#, Client company, error reason

GMS