ASN 20 Solution

From UG

Revision as of 23:41, 9 August 2012 (edit) Alex (Talk | contribs) (→Create CT - Universal ASN Form) ← Older edit		Current revision as of 16:48, 19 February 2015 (edit) (undo) Andrei (Talk | contribs) (→ANA report)
(471 intermediate revisions not shown)
Line 1:		Line 1:
	[[Category:ASN 20]]		[[Category:ASN 20]]
		+
		+	== About ==
		+
		+	This wiki defines both Requirements and Solution for ASN 20 project.
		+
		+	Primary audience - Development Team (leads, developers) and Product Team (prod manager, business analysts).
		+
		+	Author: alex@jaguarfreight.com
	== Preliminary Remarks ==		== Preliminary Remarks ==
		+
		+	=== Core Needs ===
		+
		+	''Copied from [[#ASN 20 BR]] wiki.''
		+
		+	ASN 20 will extend ASN 1.X to provide the following functionality - see below.
		+
		+	* extend Shipper / ASN / Planner / Jaguar Ops functionality to:
		+	** other MOTs (Air, Ocean, etc)
		+	** any Client Company
		+
		+	* add some additional features (such as Additional MOT Air approval)
		+
		+	* introduce some changes (such as FTL/LTL logic)
		+
		+	* some not directly related to ASN functionality (such as merging Com and EQuery)
	=== ASN 2.0 vs ASN 1.X ===		=== ASN 2.0 vs ASN 1.X ===
Line 11:		Line 35:
	=== ASN 2.0 vs International Portal ===		=== ASN 2.0 vs International Portal ===
-	Originally this scope was kept under larger International Portal project. Most recently it was decided to extract ASN related functionality and implement it as soon as possible.  This project to be called ASN 2.0.	+	Originally this scope was kept under larger International Portal project. Most recently it was decided to extract ASN related functionality and implement it as soon as possible.  This project is to be called ASN 2.0.
	Some features that were developed or half-developed under I-Portal such as Flexible CT editor, merging of Client and Internal App were put on hold and are out of scope for this project.		Some features that were developed or half-developed under I-Portal such as Flexible CT editor, merging of Client and Internal App were put on hold and are out of scope for this project.
-	Some features such as new User Roles Manager will be used for this module. But some adjustment is required (some Roles will be defined as Flexible and some as Built In).	+	Some features such as new User Roles Manager will be used for this module. But some adjustment is required (example: some Roles will be defined as Flexible and some as Built In).
-	Also we need to clearly define in the system TMS vs non TMS option for Truck Domestic mode.	+	Also we need to clearly define in the system option for Truck Domestic mode: '''TMS''' vs '''non-TMS'''.
-	== Preliminary Tasks ==	+	=== Rapid development for ASN 2.0 ===
		+
		+	We should try to take such development approach that allows for rapid first version that could change after we get additional understanding soon after (if we sell this solution). Ideally code that we write should not affect existing code that already supports ASN 1.X and CT2. Same would be true for database structure that supports existing data.
		+
		+	=== Demo version first ===
		+
		+	It is requested to produce demo version first (limited set of features, no need for production quality) within first 4-5 weeks of development.
		+
		+	== Misc Set 1 ==
		+
		+	These are Non Core (Peripheral) tasks.
		+
		+	=== Add Clone User feature ===
		+
		+	'''BR:''' [[ASN_20_BR#Add_Clone_User_feature]]
		+
		+	On UI level there would be "Clone" button on Admin > Users Admin panel.
		+
		+	Selecting one user and pressing "Clone" would open up Add New User panel with all info pre-populated from selected user except (these fields should be empty):
		+
		+	* username
		+	* First / Last name
		+	* password
		+	* SkypeId
		+	* birthday
		+	* phone
		+
		+	Note to Developer
		+	-----------------
		+	We used to have this feature. After we merged Jag and Non-Jag profiles it disappeared.
		+	Search for this code and re-use if possible.
		+
		+	'''Post Impl Notes.'''
		+
		+	Implemented as defined in spec.
		+
		+	=== Add Create GRP action to Virtual Group ===
		+
		+	'''BR:''' [[ASN_20_BR#Add_Create_GRP_action_to_Virtual_Group]]
		+
		+	See mock up below.
		+
		+	[[File:Create GRP under Virtual Group.JPG]]
		+
		+	On "Create GRP" load "Add shipment group" window:
		+	* List all CT numbers there.
		+	* if all CTs have same E0 and MOT then pre-fill these fields
		+	* if these CTs can't be grouped together provide Error message (try to re-use existing logic/code)
		+
		+	=== Create and consolidate TMS and ASN Admins ===
		+
		+	'''Create and consolidate TMS Admin'''
		+
		+	1) Create '''Admin > TMS''' menu item
		+
		+	2) Move Admin > Client Application > Admin > TMS to '''Admin > TMS'''
		+
		+	3) Associate Trailer payload Admin with TMS:
		+
		+	Move Admin > Transportation > Trailer Payload panel to Admin > TMS
		+
		+	'''Create and consolidate ASN Admin'''
		+
		+	1) Create '''Admin > ASN''' menu item
		+
		+	2) Move Admin > Client Application > Admin > Shipper Portal to '''Admin > ASN'''
		+
		+	=== Re-design SKU Map ===
		+
		+	'''SKU Map.'''
		+
		+	"SKU Map" aka "SKU to Planner mapping" as defined in ASN 1X is a table (uploaded in the form of xls) that links unique SKU# to SKU description and to planners name.
		+
		+	It provides auto-suggest for SKU description on ASN form and planner filter for List CTs under Planners login.
		+
		+	It was required only for CTs that are associated with one particular PO Issued By value.
		+
		+	Link to ASN 1X spec: [[ASN_1.X#SKU_to_Planner_Mapping_Feature]].
		+
		+	'''SKU Map browser.'''
		+
		+	We need to add one simple important table: history of uploaded files with ability to View files and with these attributes per File entity:
		+
		+	* file-name
		+	* file size
		+	* time-stamp when uploaded
		+	* who uploaded (username)
		+
		+	Currently, it is not possible to see even currently uploaded xls.
		+
		+	Figure below suggests possible UI design to satisfy stated functionality.
		+
		+	* Upload button - to upload new files.
		+	* View button - to view existing.
		+
		+	Option with No:
		+
		+	[[File:PO Issued with No.JPG]]
		+
		+	Option with Yes:
		+
		+	[[File:PO Issued with Yes and browser.JPG]]
		+
		+	=== Flag CT feature ===
		+
		+	'''BR/ISA:''' [[ASN 20 BR#Flag CT feature]]
		+
		+	=== Merge Com and EQuery ===
		+
		+	'''BR/ISA:''' [[ASN 20 BR#Merge Com and EQuery ]].
		+
		+	=== Flexible Shipments List ===
		+
		+	'''BR/ISA:''' [[ASN 20 BR#Flexible Shipments List]].
		+
		+	== Misc Set 2 ==
	=== Add TMS E0 attribute ===		=== Add TMS E0 attribute ===
Line 25:		Line 164:
	Currently "TMS solution" supports only one Client Company (E0) at a time - we can not send shipments to TMS that are identified by more than one E0 - this case is not defined - no code or business process exists to handle this case properly. This restriction will remain in ASN 2.0.		Currently "TMS solution" supports only one Client Company (E0) at a time - we can not send shipments to TMS that are identified by more than one E0 - this case is not defined - no code or business process exists to handle this case properly. This restriction will remain in ASN 2.0.
-	But we need to add parameter to the system that defines what E0 "is linked to" TMS currently. This will help in :	+	We need to add parameter to the system that defines clearly what E0 "is linked to" Descartes TMS currently. This will help in :
-	* reporting (for example for DR/KPI reporting we will know what CTs are linked to cost that we receive from TMS and store in special Load table vs costs entered by operators)	+	* reporting
-	* validation (to make sure we do not send CTs from more than one E0 to TMS)	+	** for example for DR/KPI reporting we will know in this case what CTs are linked to cost that we receive from TMS vs costs entered by operators. It is important because we keep these costs in different database tables for these two cases.
		+
		+	* validation
		+	** to make sure we do not send CTs from more than one E0 to TMS
	See mock up below.		See mock up below.
Line 34:		Line 176:
	[[File:TMS Admin with E0.png | 500px]]		[[File:TMS Admin with E0.png | 500px]]
-	=== Add Role Type attribute: Built In vs User Defined User Roles ===	+	=== Tune Role Admin ===
		+
		+	'''Add Role Type attribute: Built In vs User Defined User Roles.'''
	We have to distinguish between Built In and User Defined User Roles.		We have to distinguish between Built In and User Defined User Roles.
Line 48:		Line 192:
	1 - change button label		1 - change button label
-	2 - add "User Type" column	+	2 - add "Role Type" column
	[[File:User Roles Admin with User Role Type.png | 300px]]		[[File:User Roles Admin with User Role Type.png | 300px]]
-	=== Add Generic Shipper and Generic Planner Built In User Roles ===	+
		+	'''Add Generic Shipper and Generic Planner Built In User Roles.'''
	Currently the only Shipper and related Planner roles defined in the system are "EA Shipper" and "EA Planner". These are built in roles.		Currently the only Shipper and related Planner roles defined in the system are "EA Shipper" and "EA Planner". These are built in roles.
Line 58:		Line 203:
	They currently support only Elizabeth Arden (EA) Domestic Trucking workflow.		They currently support only Elizabeth Arden (EA) Domestic Trucking workflow.
-	Since it is intention to increment/change EA workflow and also to add support for any Client Company without distracting existing operations it is suggested to create two new built in roles "Generic Shipper" and "Generic Planner" that would fully satisfy ASN 2.0 requirements.	+	Since it is intention to increment/change EA workflow and also to add support for any Client Company without distracting existing operations we need to create two new built in roles "Generic Shipper" and "Generic Planner" that would fully satisfy ASN 2.0 requirements.
	See #3 and #4 on the Figure above.		See #3 and #4 on the Figure above.
-	Deploy this into production. After release we would have:	+	Deploy this into production. After release we should:
	* EA Shipper		* EA Shipper
Line 81:		Line 226:
	Obviously we should not create separate similar code for EA vs Generic roles.		Obviously we should not create separate similar code for EA vs Generic roles.
-	=== Make PO Issued By attribute Client Company specific ===	+	== Misc set 3 ==
-	Since every Client Company has its own PO Issued By List it has to be defined in Client Company profile - see 1 on Figure below.	+	=== ASN transmit ===
-	Since approval type will be Shipper specific we have to move related parameters to Shipper profile - see 2 on Figure below.	+	'''BR/ISA:''' [[ASN_20_BRBA#ASN transmit]]
-	Also now [[#SKU Map]] should become part of this profile - see #3 below.	+	'''ASN transmit: Admin'''
-	Y vs N indicate if SKU Map is used for selected PO Issued By or not.	+	Admin user should be able to add '''ASN Transmit Option'''.
-	SKU Map is not required feature therefore default is N.	+	Each ASN Transmit Option has the following attributes:
-	[[File:PO Issued By as a property of Client Company.png | 400px]]	+	* ''Name''
		+	** defined by user text; examples: Jaguar(CT2), Panalpina(3PL)
-	On "Add" the following pop-up will be produced:	+	* ''Type''
		+	** possible values: {System, User Defined}
		+	*** System - hard coded option; for now it is only one: Jaguar(CT2)
		+	*** User Defined - user can add and define options in this admin
-	[[File:PO Issued with No.JPG]]	+	* ''Method''
		+	** for "Jaguar(CT2)" it should say "native/internal". In this case CT2 will internally open access to CT record to Jag Ops
		+	** for all user defined it should provide drop down with one option: "email"
-	=== SKU Map ===	+	UI mock up: TBD.
-	"SKU Map" aka "SKU to Planner mapping" as defined in ASN 1X this is a table (uploaded in the form of xls) that links unique SKU# to SKU description and to planners name.	+	Components using this:
		+	* [[#Create and Submit ASN Form]]
		+	* [[#Portal Profile: MOT Settings ]]
-	It provides auto-suggest for SKU description on ASN form and planner filter for List CTs under Planners login.
-	It was required only for CTs that are associated with one particular PO Issued By value.	+	'''ASN transmit: email option'''
-	Link to ASN 1X spec: [[ASN_1.X#SKU_to_Planner_Mapping_Feature]].	+	option 1) One e-mail will have two attachments:
		+	* commodity info
		+	** utilize existing "Download to xls format" but remove totals info
-	'''SKU Map browser.'''	+	* non-commodity info
		+	** create similar format to above but list attribute/value vertically
-	We need to add one simple important table: history of uploaded files with ability to View files and with these attributes per File entity:	+	option 2) One e-mail will have one attachment
-	* file-name	+	=== Logs ===
-	* file size	+
-	* time-stamp when uploaded	+
-	* who uploaded (username)	+
-	Currently, it is not possible to see even currently uploaded xls.	+	Both Drill down and naming (!) in "Events posted from > ASN Portal" should emulate what we have in in Main Menu > Admin > ASN.
-	Figure below suggests possible UI design to satisfy stated functionality.	+	To keep it simple you could have:
-	* Upload button - to upload new files.	+	* Events posted from > ASN (root)
-	* View button - to view existing.	+	* Events posted from > ASN > Admin > Asn Misc
		+	* Events posted from > ASN > Admin > Portals
		+	* Events posted from > ASN > ASN Records (updates to all CTs that would include all shipper updates and all planner updates)
		+	* Events posted from > ASN > ASN Users OR Events posted from > Admin > Users (all ASN related updates to users)
-	[[File:PO Issued with Yes and browser.JPG]]	+	== Portal ==
-	=== Clone User ===	+	ASN Portal is created for particular Company and its Supply Chain. Example: EA.
-	We need to add back Clone User feature.	+	Therefore we need to create such entity in the system so we can define all properties associated with it.
-	It is required for this project because:	+	We could have used Client Company E0 for that purpose but unfortunately we sometimes create multiple E0s for the same Company/Supply Chain. For example for EA we have:
-	* new Shipper profile has many options to set and therefore it is time-consuming	+
-	* many shipper users will have similar profile	+
-	* we do not have mechanism in place to set Shipper values for multiple users at a time yet	+
-	On UI level there would be "Clone" button on Admin > Users Admin panel.	+	* "EA DOM PORTAL" E0 for USA Trucking Domestic shipments
		+	* "Elizabeth Arden" E0 for Air and Ocean shipments
-	Selecting one user and pressing "Clone" would open up Add New User panel with all info pre-populated from selected user but:	+	So in the case above we will create Portal named "EA" and associate it with all relevant E0s: in this case "Elizabeth Arden" and "EA DOM PORTAL".
-	* username	+	=== List of Portals and Portal Profile ===
-	* First / Last name	+
-	* password	+
-	* SkypeId	+
-	=== Truck size entity ===	+	'''List of Portals'''
-	We need to create and manage new entity that lists various truck sizes.	+	Add this to '''Admin > ASN '''.
-	Add this as a tab to Admin > Transportation.	+	This is a panel that lists all existing Portals in the system.
-	Typical values: 48 ft, 53 ft.	+	Each portal listed with some additional information:
		+	* number of linked E0s
		+	* number of linked users that are just Shippers
		+	* number of linked users that are just Planners
		+	* number of linked users that are both Shippers and Planners
-	=== Managing Pick Up and Delivery Addresses ===	+	On "Add" or "Edit" system shows [[#Portal Profile]].
-	On ASN Form it would make most sense to display only Pick Up (Origin Door) and Delivery (Destination Door) Locations that are relevant to specific Supply Chain (E0).	+	See mock up below.
-	These two lists could be defined in a Client Company profile.	+	[[File:List of portals.JPG]]
-	One Shipper normally has many Pick Up and many Delivery Locations of course so wee need multiselect on UI.	+	'''Portal Profile'''
-	Add these controls to a separate tab.	+	Portal Profile has several sections - see below.
-	We also have to provide option to use addresses defined here or any address from Address book.	+	Note to developer
		+	-----------------
		+	I suggest that we implement UI similarly to Client Companies:
		+	a) Add/Edit results in a pop-up window.
		+	b) We utilize a mix of <tabbox/> and <groupbox/> with <caption/> to present various sections.
-	To achieve that:	+	'''Portal Profile: General Settings Section'''
-	* create 2 radio buttons separately for Pick Up and Delivery	+	In this section the following 3 parameters have to be defined:
-	* option 1: "Use addresses defined here"	+
-	* option 2: "Use Pick Up (T4 list) and Delivery Locations (T7 list) from CT2 Address Book"	+
-	Default is unchecked and therefore shippers will choose from any address available in the system.	+	* Portal Name:
		+	** user will name it here
-	[Mock Up TBD]	+	* Portal Note:
		+	** some useful memos could be posted here to preserve knowledge for other admin users
		+
		+	* Related E0s:
		+	** list of E0s that would be used "under this Portal"
		+
		+	See UI mock up below.
		+
		+	[[File:Portal General.JPG]]
		+
		+	'''Portal Profile: MOT Settings Section'''
		+
		+	In this section we define all desirable configurations under specific portal that relates to the following parameters:
		+
		+	* ''MOT:''
		+
		+	:- "native" to CT2 MOTs
		+
		+	* ''Synonym (mode)'' and ''Synonym (sub-mode)''
		+
		+	:- this combination is just a synonym for MOT
		+	:- two values define two dropdowns on ASN form
		+
		+	* ''From:''
		+
		+	:- options:
		+	:: - Regions (multi with any)
		+	:: - Countries (multi with any)
		+	:: - Shippers (multi with any)
		+	:- see also [[#ASN transmit]]
		+
		+	* ''To:''
		+
		+	:- options:
		+	:: - Regions (multi with any)
		+	:: - Countries (multi with any)
		+	:: - Consignees (multi with any)
		+	:- see also [[#ASN transmit]]
		+
		+	* ''Transmit To:''
		+
		+	:- see also [[#ASN transmit]]
		+
		+	* ''Link to E0:''
		+
		+	:- see explanation here: [[#Portal]]
		+
		+	===== Mapping =====
		+
		+	Origin Region/Country should map to country in Pick Up location.
		+
		+	Destination Region/Country should map to country in Ship To location.
		+
		+	Developers Note
		+	--------------
		+	Per Kostya's suggestion:
		+	* def: let's call each line a "rule"
		+	* all "rules" defined in the table are ordered
		+	* rules at the top have higher precedence that those at the bottom
		+	* default "rule" would be added to cover cases that are not defined
		+
		+	See UI mock up below.
		+
		+	List:
		+
		+	[[File:Portal MOT Settings.JPG]]
		+
		+	Edit:
		+
		+	[[File:Edit mot settings for portal.JPG]]
		+
		+	'''Portal Profile: Approval Settings Section'''
		+
		+	Specific portal could have option to transmit all ASNs to 3PLs for transportation as they get submitted by Shippers or could provide separate layer for approval workflow:
		+
		+	* option 1) All ASNs will be transmitted to 3PLs for transportation automatically
		+	* option 2) At least some ASNs needs to go through approval process
		+
		+	If option 2 is selected then additional information needs to be defined such as:
		+	* PO Issued By list
		+	* approval mode for every PO Issued By/MOT combination
		+	:- possible values: {Auto, Single, Double}
		+	* Air Approval and Cargo Due date settings
		+
		+	UI mock-up:
		+
		+	[[File:Portal Planning Settings.JPG]]
		+
		+
		+	Note to developer
		+	-----------------
		+	Feel free to implement another UI equivalent to above.
		+
		+	'''Edit or Delete Portal'''
		+
		+	Select portal from [[#List of Portals]] and apply action.
		+
		+
		+
		+	'''Make PO Issued By List Portal specific'''
		+
		+	This feature is already in the system.
		+
		+	Since every Supply Chain/Company has its own PO Issued By List it has to be defined in Portal profile - see [[#Portal Profile]].
		+
		+	Since approval type will be Portal specific we have to move related parameters there as well - - see [[#Portal Profile]].
		+
		+	Existing list is located under Admin > Transportation > PO Issued By.
		+
		+	It needs to be again defined for Portal once we migrate from EA Shipper to Generic Shipper.
		+
		+
		+	'''SKU Map should be PO Issued By specific and Portal specific'''
		+
		+	This feature is already in the system.
		+
		+	Now SKU Map should become Portal specific - see [[#Portal Profile: Approval Section]].
		+
		+	Y vs N indicate if SKU Map is used for selected PO Issued By or not.
		+
		+	SKU Map is not required feature therefore default is N.
		+
		+	On "Add" the following pop-up will be produced - see [[#Re-design SKU Map]].
	== Shipper Related Functionality ==		== Shipper Related Functionality ==
Line 180:		Line 459:
	=== New Shipper Profile ===		=== New Shipper Profile ===
-	==== Shipper Profile General section ====
-	* E0. Client Company field	+	'''Shipper Profile: General section'''
-	** change: now one Shipper could be linked to (create ASNs for) multiple E0	+
-	* Shipper (T1)	+	We have the following fields:
		+
		+	* ''Portal:''
		+	** change: used to be linked to (create ASNs for) one E0
		+
		+	* ''Shipper (T1):''
	** remains the same		** remains the same
-	* Shipments weight in	+	* ''Shipments weight in:''
	** remains the same		** remains the same
	See mock up below.		See mock up below.
-	[[File:New Shipper profile.png | 600px]]
-	==== Shipper Profile Client Company specific section ====	+	'''Shipper Profile: Portal specific section'''
-	See mock up above (tab is open for client "3Com").	+	For every Portal defined in General section we can define the following:
-	For every E0 defined in General section we need to define approval, MOT and other options.	+	* ''Approval mode for every PO Issued By/MOT combination''
		+	** By default these settings are taken from Portal profile
		+
		+	* ''Air Approval and Cargo Due date settings''
		+	** By default these settings are taken from Portal profile
-	To accommodate that we allocate one panel per Client (use tabbed view, or any equivalent layout).	+	* ''Available MOT setting''
		+	** we define can Shipper select mode at all or not
		+	** if Yes then we define what mode (out of defined in Portal modes) he can select
-	PO Issued by list is taken from E0 Client Company.	+	See mock up below.
-	As you can see all options are PO Issued By specific and MOT specific (except AA and CDF which are only PO Issued By specific).	+	[[File:New Shipper profile.png]]
-	So for every PO Issued By three parameters needs to be defined:	+	=== New ASN Form ===
-	* Approval Types(as defined in ASN 1.X; new types has been added)	+	'''ASN form and logic: list of changes.'''
-	** define separately per each MOT	+
-	** see list here: [[#Approval types]]	+
-	** value "NA" indicates that shipper can not create ASNs with this MOT	+
-	* CDF: Cargo Due Feature on/off ([[#Cargo Due Date Feature]])	+
-	* AA: Air Approval (new parameter; see [[#Air Approval Type]])	+
-	===== TMS mode =====	+	Here is a brief list of changes for ASN form and on submit logic:
-	If user selects TMS option then system must validate that E0 in Shipper profile is the same as defined in TMS Admin.	+	* Add mode/sub-mode fields
		+	* Show truck table for FTL
		+	* Show container table for FCL
		+	* on submit create CT records based on new special algorithm
		+	* new dims and CBM management
-	=== Create CT - Universal ASN Form ===
-	This new ASN form allows shippers to create CTs for different mode.	+	'''ASN form mock up.'''
-	See Figure below.	+	See below mock up for Ocean FCL case.
	[[File:Create CT form.png | 800px]]		[[File:Create CT form.png | 800px]]
-	==== ASN Body ====
-	We have one more field: [[#Transport Mode]].	+	==== Add mode and submode ====
-	===== Transport Mode =====	+	Add (Transport) "Mode" + "Sub-Mode" as defined through "MOT synonym" - see [[#Portal Profile: MOT Settings Section]].
-	"Transport Mode" is a term we use for Shippers/Planners/external parties. It is equivalent to MOT.
-	Shipper will be given the following options when creating CT (see below). See also mapping into MOT.	+	==== Truck and container tables on ASN form ====
-	Transport Mode = MOT:	+	===== Add FTL vs LTL flag =====
-	* FTL = Truck Dom	+	<div style="background-color:wheat">
-	* LTL = Truck Dom	+	'''BR:'''
-	* FCL = FCL(AW)	+	* FTL - full truck load. Paid per track regardless of weight/volume. For very large shipments.
-	* LCL = LCL	+	* LTL - less than truck load. Paid based on weight/volume. For small and medium shipments.
-	* Air = Air	+
-	* LDP Air = Truck Air	+
-	* LDP FCL = Truck Ocean	+
-	* LDP LCL = Truck Ocean	+
-	Note to developer	+	In ASN 2.0 we would like to request shipper to indicate what kind of shipment he is requesting: FTL vs LTL.
-	-----------------	+
-	There are options on how this list should be maintained in the system.	+	Also this should be a sub-mode offered to Shipper/Planner.
-	Probably as Java constants.	+	</div>
-	It is probably OK to hardcode the mapping above.	+
		+	<div style="background-color:lightGray">
		+	'''ISA:'''
		+
		+	(Per Kostya) the best way to implement is to add extra entity "Sub-mode" with values: {LTL, FTL}
		+	</div>
		+
		+	===== Add Truck table for FTL =====
		+
		+	'''BR:'''
		+
		+	We want to request the following info from Shippers when they submit ASN for FTL shipments:
		+	* how many trucks of what size are required to move commodities defined on ASN
		+
		+	'''PIN:'''
		+
		+	The following design has been implemented:
		+
		+	[[File:Truck info.JPG]]
		+
		+	NOTE: see also [[#CRW 8 Re-design Truck Info]] (pendng)
		+
		+	===== Add Container table for FCL =====
		+
		+	<div style="background-color:wheat">
		+	'''BR:'''
		+
		+	Provide same container related capability to Shippers as ops have on internal:
		+	* create containers with size/type/seal/number
		+	* assign commodities
		+
		+	Above will be optional. In many cases shippers will just indicate how many containers and of what size.
		+	</div>
		+
		+	<div style="background-color:lightGray">
		+	'''ISA:'''
		+
		+	I suppose we could just re-use back-end (non-zul) code that we have
		+	</div>
-	List of choices is defined in [[#New Shipper Profile]]. MOT that are NA will not show up in dropdown.	+	==== On submit algorithm ====
-	==== ASN Commodity table ====	+	'''If''' ASN is associated with E0 that is associated with TMS (see [[#Add TMS E0 attribute]])
-	In ASN 20 Commodity table has one additional field: [[#Equipment]].	+	'''Then''' keep existing ASN 1.X logic (create separate CT for each commodity table)
-	===== Equipment =====	+	'''Else''' create one CT with multiple lines in commodity table (as defined on ASN form).
-	Equipment options will change depending on what Transp Mode is selected.	+	This CT will have status new and appear under radar of appropriate planners.
-	* For FCL it will give options for container size / type.
-	* For FTL it will give options for truck size see [[#Truck size entity]].
-	* For all others it will show "N/A" (not applicable).
-	See also "IMPORTANT NOTE" on Figure above (#3). System can not validate this so we rely on Shippers to comply with this requirement.	+	==== Preview and Confirmation Screen ====
-	==== On Save Logic ====	+	Preserve such logic defined in ASN 1.X.
-	Preserve such logic defined in ASN 1.X:	+	Show these screens on submit:
	* Preview Screen		* Preview Screen
	* Confirmation Screen		* Confirmation Screen
-	* Email Notification: on ASN create (by Shipper) - email to Shipper
-	See it defined here: [[ASN 1.X#Create_CT_record]]. (NOTE: This wiki might not be completely up to date).	+	See it defined here: [[ASN 1.X#Create_CT_record]]. (NOTE: This wiki might not be completely up to date, functionality in production is more relevant).
-	===View list of CT records as a Shipper ===	+
		+	==== Email Notifications on ASN submit ====
		+
		+	Send Notification email to Shipper who created record on ASN submit (as defined in ASN 1.X).
		+
		+
		+	==== ASN info access after submit ====
		+
		+	To remind once ASN is submitted the following could happen in terms of ASN info access:
		+
		+	* ''if no approval process defined'' then:
		+	** CT record created based on ASN will show up on [[#ANA report]] or be transmitted to other 3PLs
		+
		+	* ''if approval process is defined'' then:
		+	** CT record created based on ASN will become available to Jag Ops or other 3PLs
		+	** It will become available for planners for approval process
		+
		+	In both cases above shipper user can edit CT record until "ASN locked for edit condition":
		+	* ''Actual pick up date is set.''
		+
		+
		+	=== New dims and CBM management ===
		+
		+	<div style="background-color:wheat">
		+	'''BR:'''
		+
		+	We need to add choice to enter cbm or dims per line item vs per table.
		+	</div>
		+
		+	To do that:
		+
		+	* add selector "Define volume/dims for each commodity line (Y/N)?"
		+	** if N then functionality is the same as on internal (see Table B and Dims/Non-Dims selector)
		+	** if Y then see below
		+	*** each commodity line is incremented with fields W,H,L,Unit(for L,W,H),total(in cbm),total(in cft)
		+	*** calculate / display total for entire com table (in both cbm and cft)
		+	*** provide Non-Dims option (to enter volume, not calculate) per commodity line
		+
		+	* use same functionality for both internal and Client Apps (= it must behave same way on both Client and Internal)
		+
		+	=== Shipments List for a Shipper user ===
		+
		+	'''Add mode and sub-mode columns and filters.'''
	Preserve existing logic. See [[ASN_1.X#View_list_of_CT_records_as_a_shipper]].		Preserve existing logic. See [[ASN_1.X#View_list_of_CT_records_as_a_shipper]].
-	===Edit, Clone, Delete CT records as a Shipper ===	+	But need to add mode and sub-mode columns.
		+
		+	See (1) and (2) on mock up below.
		+
		+	'''Add Display one line per CT option.'''
		+
		+	If un-selected then show all commodity items.
		+
		+	If selected then fields that have different values across commodity items should show "var" (for various) and ideally on mouse over show all values.
		+
		+	See (4) on a mock up below.
		+
		+	'''Shippers UI in case of multiple Portals.'''
		+
		+	In this case Shipper need to choose from the list of Portals to see shipments for particular Portal.
		+
		+	See (3) on a mock up below.
		+
		+	This is due to business requirement to not mix CTs within different Portals.
		+
		+	'''Edit, Clone, Delete CT records as a Shipper'''
	Preserve existing logic. See [[ASN_1.X#Core Shipper Functionality]].		Preserve existing logic. See [[ASN_1.X#Core Shipper Functionality]].
		+
		+	'''Shipments List mock up.'''
		+
		+	See mock up below.
		+
		+
		+	[[File:CT list for Shipper.png|750px]]
	== Planner Related Functionality ==		== Planner Related Functionality ==
Line 293:		Line 675:
	=== New Planner Profile ===		=== New Planner Profile ===
-	'''CHANGE: many E0 per Planner'''	+	Each Planner is associated with multiple Portals.
-	[[File:New Planner Profile.png|400px]]	+	Under each Portal we need to define his role separately for each PO Issued By.
-	=== View list of CT records as a Planner ===	+	See mock up below.
		+
		+	[[File:Planner role.JPG|600px]]
		+
		+	Planners that handle [[#Air Approval Type]] defined as Air Planners.
		+
		+	=== Shipments List for a Planner user ===
	Preserve existing functionality: [[ASN_1.X#View_list_of_CT_records_as_a_planner]]		Preserve existing functionality: [[ASN_1.X#View_list_of_CT_records_as_a_planner]]
-	=== Authorize CT records ===	+	'''Planners UI in case of multiple Portals.'''
		+
		+	Please apply same approach to UI as for Shipper in this case.
		+
		+	'''Add type of planner to UI.'''
		+
		+	Add type of planner to Planner UI.
		+
		+	It should be a simple label. Examples:
		+
		+	* You are a Super Planner
		+	* You are a Regular and Air Planner
		+
		+	'''Shipments List for a Planner mock up.'''
		+
		+	See below.
		+
		+	Additional features (1),(2),(3),(4) are defined in [[#Shipments List for a Shipper user]]
		+
		+	[[File:CT list for Planner.png|750px]]
		+
		+	=== Approval related logic ===
	Preserve existing functionality: [[ASN_1.X#Authorize_CT_records]].		Preserve existing functionality: [[ASN_1.X#Authorize_CT_records]].
Line 307:		Line 716:
	See also  [[ASN_1.X#Double Approval Process Feature]].		See also  [[ASN_1.X#Double Approval Process Feature]].
-	'''Add the following functionality - see below.'''	+	Also introduce some additional functionality and changes as defined below.
-	==== Approval types ====	+	==== Approval algorithm ====
		+
		+	"Under one ASN" (decision will be made for one ASN at a time) planner might set different status for every commodity line. Every time Planner process multiple lines:
		+
		+	* create one CT for all rejected records
		+	* create one CT for all on hold records
		+	* create one CT per MOT for all approved records
		+
		+	NOTE: all commodities that are combined in one CT must have same "header" info (origin, destination, etc).
		+
		+	Notes to developer.
		+	-------------------
		+	1) CT# that was created from ASN originally will not be re-used in above process or not.
		+
		+	Approval options:
		+
		+	* through Shipments List
		+	* through View CT pop-up
		+
		+	IMPORTANT: If ASN is not approved completely first time by planner (all items) then clear Truck Info and Container Info since it is relevant only if all commodities are moved together.
		+
		+	==== Approval with Changing MOT ====
		+
		+	Planner can change MOT when he is changing the status from New to another status.
		+
		+	Planner can not approve shipment with Undefined mode.
		+
		+	MOT can not be changed after CT is approved.
		+
		+	==== Approval types summary ====
	* single - defined in [[ASN 1.X]]		* single - defined in [[ASN 1.X]]
	* double - defined in [[ASN 1.X]]		* double - defined in [[ASN 1.X]]
-	* no approval - see [[#No Approval Type]]	+	* no approval - new type - see below
-	* air approval - see [[#Air Approval Type]]	+	* air approval - new type - below
-	===== Air Approval Type =====	+	==== Air Approval Type ====
	This is an additional layer of approval for Air shipments that is required before CTs become visible to Jag Ops.		This is an additional layer of approval for Air shipments that is required before CTs become visible to Jag Ops.
Line 322:		Line 760:
	CTs created by Shipper Users that have this approval type selected would require Planner User who's is "Air Planner" to approve these shipments.		CTs created by Shipper Users that have this approval type selected would require Planner User who's is "Air Planner" to approve these shipments.
-	===== No Approval Type =====	+	==== No Approval Type ====
		+
		+	This is a.k.a. Auto Approval.
	CTs created by Shipper Users that have this approval type selected would be automatically available for Jag Ops bypassing any approval layer (unless Air Approval is required).		CTs created by Shipper Users that have this approval type selected would be automatically available for Jag Ops bypassing any approval layer (unless Air Approval is required).
		+
		+	==== After Approval logic ====
		+
		+	Reminder that once CT is approved one of these two things would happen:
		+
		+	* it becomes available on dashboard for Jaguar Ops
		+	* it is transmitted to other 3PLs
		+
		+	==== Notifications by Planner ====
		+
		+	Preserve ASN 1X notifications:
		+	* http://ct.jaguarfreight.com/wiki/ASN_1.X#Functionality_Overview_3
	== Jaguar Operator Related Functionality ==		== Jaguar Operator Related Functionality ==
-	As in ASN 1X shipments that are approved (or not require approval) needs to come under radar of operators so that they can be handled.	+	There are number of changes required on internal for ASN 20 version. See below.
-	This is achieved by New Approved But Not Handled Shipments Dashboard Report (aka ANH Report).	+	=== ANA report ===
-	It is similar in spirit and functionality to TDS Dashboard in ASN 1X for TMS Domestic shipments for EA.	+	As in ASN 1X shipments that are approved (or not require approval) are ready for Transportation and need to come under radar of operators so that they can be handled.
-	=== Overview of core ANH DB functionalities ===	+	This is achieved by Approved But Not Actioned shipments '''Dashboard''' Report (aka ANA Report).
-	* newly approved shipments should appear on DB and stay there until they are noticed and acted on by operator	+	It is similar in spirit and functionality to TDS Dashboard in ASN 1X for TMS (Truck Dom Stats) shipments for EA.
-	* once operator starts handling them they should "drop off" of this DB; this should happen once [[#Approved but Not Handled (ANH) Condition]] is achieved	+
-	* 1st level:	+
-	** provides counters and breakdown per MOT and Client Company	+
-	** Jag Ops user profile can be configured to limit to specific subset of MOTs as well as Cient Companies	+
-	* 2nd level provides (as in TDS):	+
-	** display of shipments with details (selected attributes)	+
-	** filters	+
-	** "actions" list (ability to select several shipments that satisfy criteria and apply action)	+
-	*** action to create GRP (new in ASN 20)	+
-	[Fig TBD]	+	Newly approved shipments should appear on DR and stay there until they are noticed and acted on by an operator.
-	=== Approved but Not Handled (ANH) Condition ===	+	'''NOTE 1:''' TMS CTs should not be a part of this report as they are part of TDS.
-	CT is approved (or Approval type = No approval) AND CT is not "routed" (Pick Up Trucker is not assigned).	+	'''NOTE 2:''' Only non-transmit CTs should be included.
-	=== ANH DB Admin ===	+	'''ANA report level 1'''
-	Options for specific user:	+
-	* enable/disable	+
-	* E0 multiselect - limits list of client companies available on DB	+
-	* MOT multiselect - limits list of MOTs available on DB - see below	+
-	[Fig TBD]	+	Information is structured by Client and by [[#Transport Mode]].
-	=== ANH DB list of MOTs ===	+	See mock up below.
-	Air / Ocean LCL / Ocean FCL / Truck Dom (non-TMS) / Truck Air (LDP) / Truck Ocean (LDP)	+
-	=== ANH DB 1st level ===	+	[[File:AR rep level 1.png]]
-	Provide counters in a tabular form.	+
-	Columns - MOTs - see above.	+	For every such group of shipments two counters provided in the form of X/Y.
-	Rows - Client Company list.	+	'''ANA status'''
-	=== ANH DB 2nd level ===	+	ANA - '''approved''' (but not yet '''actioned''');
-	* filters - same as in ASN 1X TDS for now	+
-	* CT List - same as in TDS	+
-	* actions list	+
-	** add "create GRP" action	+
-	=== Add Transport Mode to Internal Gen Tab ===	+	CT has AR status if both conditions below are met:
-	Display [[#Transport Mode]] for operators on Gen Tab as read-only.	+	* '''approved:''' CT "passed approval process" - approved by all planners involved or no approval was required
-	Label "Transport mode*"	+	* '''not actioned:''' Pick Up Trucker not assigned ''' AND ''' CTs not grouped ''' AND ''' Master not created ''' AND ''' none of  Ref Num is assigned'''
-	Display note: "* as defined by Shipper/Planner"	+	Note: the current set of conditions for EA International Portal to include a CT to the report (''per  Kostya'', --[[User:Andrei|Andrei]] 11:40, 19 February 2015 (EST)):
-	== Misc Functionality ==	+	s = s + "gs.TransportModeId IN (2,3,4,5,6) AND " +
		+	"gs.IsApprovedByPlanner = 1 AND " +
		+	"NOT gs.ActualDeliveryDate > '0000-00-00' AND " +
		+	"gs.AirlineId IS NULL AND gs.SteamshiplineId IS NULL AND " +
		+	"NOT gs.EstimatedDepartureDate > '0000-00-00' AND NOT gs.ActualDepartureDate > '0000-00-00' AND ";
		+	---
		+	all MOTs excluding UNDEF + Trucking
		+	Approved
		+	ActualDeliveryDate not set
		+	Airline + Steamshipline = Empty
		+	EstimateDepartureDate + ActualDepratureDate = Not Set
-	=== Notification Types ===	+	'''ANA report level 2'''
-	There are the following notification types defined in ASN 1X. They needs to be carried over to ASN 20.	+	Display (as on TDS):
		+
		+	* shipments with details (selected attributes)
		+	* filters
		+
		+	Note that the following columns have been added in ASN 20:
		+
		+	* MOT
		+	* Orig country
		+	* Dest country
		+	* CBM
		+	* Haz, Y/N
		+
		+	Note that the following filters have been added in ASN 20:
		+	* Portal
		+	* Client E0
		+	* Status
		+	* MOT
		+
		+
		+	Add to table below and filters.
		+
		+	Please note that in comparison with TDS there are no tabs here.
		+
		+	Instead there is a label identifying Client E0 and ANA status.
		+
		+	See mock up below:
		+
		+	[[File:AR lev 2.JPG]]
		+
		+	'''ANA report on Reports Scheduler'''
		+
		+	Should be managed through Reports Scheduler (with dashboard option).
		+
		+	Filters:
		+
		+	* E0 multiselect - limits list of client companies available on DR
		+	* MOT multiselect - limits list of MOTs available on DR - see below
		+
		+	E-mail option was not requested so please disable that option.
		+
		+	Dev Note
		+	--------
		+	Existing framework will be reworked.
		+
		+	=== Jaguar Misc functionality ===
		+
		+	'''Add some fields on Internal to Gen Tab'''
		+
		+	All new fields defined for AS 20 needs to be shown/managed on internal (at the bottom of Gen Tab for all MOTs):
		+
		+	* cargo available
		+	* cargo due
		+	* planner (uname/fname/lname)
		+	* shipper (uname/fname/lname)
		+	* PO Issued By
		+	* Approval type
		+
		+	'''Notifications by Jag Ops.'''
		+
		+	The following ASN 1X notification should remain:
-	* on ASN create (by Shipper) - email to Shipper
-	* on any approval related status assignment/change (by Planner) - email to Shipper
	* on Trucker assign (by Jag Ops) - email to Shipper		* on Trucker assign (by Jag Ops) - email to Shipper
-	== SOWs and Change Requests ==	+	== ASN 20 Misc ==
		+
		+	==== Cargo Due and Cargo Available Dates ====
		+
		+	* Cargo Available Date
		+	** required field on ASN form
		+	** required for all MOTs
		+
		+	* Cargo Due Date
		+	** required when CT is approved
		+	** required for all MOTs
		+	** please note that this date can be disabled/enabled in Portal profile
		+
		+	== Final Tasks ==
		+
		+	=== Add Standard Archiving and Logs ===
		+
		+	* For all new entity admins Standard Archiving functionality needs to be implemented
		+	* All user actions needs to be logged using Standard Logs
		+
		+	=== Add E0 specific Pick Up and Delivery Addresses ===
		+
		+	On ASN Form it would make most sense to display only Pick Up (Origin Door) and Delivery (Destination Door) Locations that are relevant to specific Supply Chain (E0).
		+
		+	These two lists could be defined in a Client Company profile.
		+
		+	One Shipper normally has many Pick Up and many Delivery Locations of course so wee need multiselect on UI.
		+
		+	Add these controls to a separate tab.
		+
		+	We also have to provide alternative to use addresses defined here or any address from Address book.
		+
		+	To achieve that:
		+
		+	* create 2 radio buttons separately for Pick Up and Delivery
		+	* option 1: "Use addresses defined here"
		+	* option 2: "Use Pick Up (T4 list) and Delivery Locations (T7 list) from CT2 Address Book"
		+
		+	Default is option 2 and therefore shippers will choose from any address available in the system.
		+
		+	[Mock Up TBD]
		+
		+	=== VG number feature (Optional task) ===
		+
		+	Add possibility to generate unique number associated with current VG.
		+
		+	Benefits:
		+	* it works like "saved filter": by entering this number operator can quickly re-create CT list and continue working with this group
		+	* helps in communication between operators
		+	* helps in communication between operators and non jaguar users
		+	* can be used in the future:
		+	** to generate docs, in accounting docs
		+	** each shipment leg can be associated with separate VG and hold specific to that leg values
		+
		+	Notes:
		+	** see mock up below
		+	** button "Generate" - see 1
		+	** VG Note (hint on what type of CTs are in this group) - see 2
		+
		+	[[File:Generate VG number.png | 700px]]
		+
		+	* Display list of generated VG numbers:
		+	** show it under Main menu > Virtual Group > History
		+	** display a table
		+	** columns:
		+	*** date/time
		+	*** VG #
		+	*** who generated
		+	*** VG Note
		+	** most recent records first
		+	** checkbox filter: show my VG only
		+
		+	== Statements Of Work ==
	=== SOW 1 Create new branch for this project from trunk; create envir for QA/SIT/UAT ===		=== SOW 1 Create new branch for this project from trunk; create envir for QA/SIT/UAT ===
Line 402:		Line 975:
	Call it "ASN 20".		Call it "ASN 20".
		+
		+	=== SOW 2  Add Clone User feature ===
		+
		+	mantis: '''0003753'''
		+
		+	spec: [[ASN_20_Solution#Add Clone User feature]]
		+
		+	=== SOW 3  Misc: Add Create GRP action to Virtual Group ===
		+
		+	mantis: '''0003754'''
		+
		+	spec: [[ASN_20_Solution#Add Create GRP action to Virtual Group]]
		+
		+	=== SOW 4 Create and consolidate TMS and ASN Admins ===
		+
		+	mantis: '''0003755 '''
		+
		+	spec: [[ASN_20_Solution#Create and consolidate TMS and ASN Admins]]
		+
		+	=== SOW 8 Re-design SKU Map ===
		+
		+	mantis: ''' 0003756 '''
		+
		+	spec: [[ASN_20_Solution#Re-design SKU Map]]
		+
		+	=== SOW 7 Flag CT feature ===
		+
		+	mantis: ''' 0003757 '''
		+
		+	spec: [[ASN_20_Solution#Flag CT feature]]
		+
		+	=== SOW 5 Merge Com and EQuery ===
		+
		+	mantis: '''0003758 '''
		+
		+	spec: [[ASN_20_Solution#Merge Com and EQuery]]
		+
		+	=== SOW 6 Flexible Shipments List ===
		+
		+	mantis: ''' 0003768 '''
		+
		+	spec: [[ASN_20_Solution#Flexible Shipments List]]
		+
		+	=== SOW 9 Add TMS E0 attribute ===
		+
		+	mantis: ''' '''
		+
		+	spec: [[#Add TMS E0 attribute]]
		+
		+	'''Non critical bugs:'''
		+
		+	1) When entering filter it shows finded E0 and clear entered info in filter box
		+
		+	2) If change E0 in admin settings, then system will send all early approved CTs for this Client company to TMS. Also it should corectly works for CTs editing.(after editing send to TMS or not)
		+
		+	functional should be tested after all other changes on ASN portal
		+
		+	5) In log records "Old Value" is always "null"
		+
		+	=== SOW 10 Tune Role Admin ===
		+
		+	mantis: ''' '''
		+
		+	spec: [[#Tune Role Admin]]
		+
		+	'''Non critical bugs/QA Notes:'''
		+
		+	1) "Also this should be obvious for the user - what role is of what type." regular user can't see what type of role is "build in" what is "User defined" in "users admin" is no mentioned.
		+
		+	2) In cpecification is no information about is "build in" roles are editable or not ? I think if somebody will edit "build in" role and would like to save it, system should propose to save it with another name.
		+
		+	=== SOW 11 New Planner Profile ===
		+
		+	mantis: ''' '''
		+
		+	spec: [[#New Planner Profile]]
		+
		+	'''Non critical bugs:'''
		+
		+	"1) Is ""Super planner"" should not be set and read only in case of ""single approval procces"".
		+	What is should be ""by default"" for auto approval PO issues ?(should it be by default ""super planner"")"
		+
		+	2)Align "Authorize CT with PO Issued By:" dropdown(selector with whole element)
		+
		+	3)Align "Portals" and "Properties" or add some separator between them.
		+
		+	'''QA notes:'''
		+
		+	третья стадия апрува:
		+
		+	"air approval" нет описания, у него тоже будут супер планер и бейсик планер или общие с другим МОТ (бесик, супер) ???
		+
		+	"каким образом planner будет связан с порталами ? (у шипмента будет маркер каким порталом он создан ?)"
		+
		+	=== SOW 12 Shipments List for a Planner user ===
		+
		+	mantis: ''' '''
		+
		+	spec: [[#Shipments List for a Planner user]]
		+
		+
		+	=== SOW 13 Approval related logic  ===
		+
		+	mantis: ''' '''
		+
		+	spec: [[#Approval related logic]]
		+
		+	=== SOW 14 Add FTL vs LTL flag and add Truck table for FTL  ===
		+
		+	mantis: ''' '''
		+
		+	spec: [[#Add FTL vs LTL flag and add Truck table for FTL]]
		+
		+	=== SOW 15 ASN transmit ===
		+
		+	mantis: ''' '''
		+
		+	spec: [[#ASN transmit]]
		+
		+	=== SOW 16 ANA report  ===
		+
		+	mantis: ''' '''
		+
		+	spec: [[#ANA report]]
		+
		+	=== SOW 17 Jaguar Misc functionality  ===
		+
		+	mantis: ''' '''
		+
		+	spec: [[#Jaguar Misc functionality]]
		+
		+	=== SOW 18 List of Portals and Portal Profile  ===
		+
		+	mantis: ''' '''
		+
		+	spec: [[#List of Portals and Portal Profile]]
		+
		+	'''Non Critical bugs:'''
		+
		+	"Transmit To:" is always "Jaguar CT2" hard coded but should be list from SOW 14 (critical)
		+
		+	1)When "All ASNs will be transmitted to 3PLs for transportation automatically" option is enabled then better to show options "Approvals" for "PO issue by" like "Auto"
		+
		+	2) No LOG records for this admin
		+
		+	3) It's possible to create few identical "transport modes" with the different "Transmit To:", how system will behave itself in this case ?
		+
		+	4) Mouse click on "Rules" for "transport modes" should select not only this particular rules but a common MOT also, so when user will try to edit it he get an admin panel for correct record.
		+
		+	'''Questions''':
		+
		+	Зачем три столбца с МОТ ??? Почему описано "- Regions (multi with any) - Countries (multi with any) - Shippers (multi with any)" а на макете только страна ?
		+
		+	=== SOW 19 New Shipper Profile  ===
		+
		+	mantis: ''' '''
		+
		+	spec: [[#New Shipper Profile]]
		+
		+	=== SOW 20 New ASN Form  ===
		+
		+	mantis: ''' '''
		+
		+	spec: [[#New ASN Form]]
		+
		+	=== SOW 21 Shipments List for a Shipper user  ===
		+
		+	mantis: ''' '''
		+
		+	spec: [[#Shipments List for a Shipper user]]
		+
		+	=== SOW 22 New dims and CBM management    ===
		+
		+	mantis: ''' '''
		+
		+	spec: [[#New dims and CBM management]]
		+
		+	== Dependencies for SOWs ==
		+
		+	*Column A: <y/n: Can coding be STARTED before all tasks in set B completed?>
		+	*Column B: <set B:list of tasks (SOW#s) that must be completed before task A can be COMPLETED>
		+	*Column C: <task A>
		+
		+	column A // column B // Column C
		+	------------------------------
		+	y // none // SOW 1 Create new branch for this project from trunk; create envir for QA/SIT/UAT
		+	y // none // SOW 2 Add Clone User feature
		+	y // none // SOW 3 Misc: Add Create GRP action to Virtual Group
		+	y // none // SOW 4 Create and consolidate TMS and ASN Admins
		+	y // 18 // SOW 8 Re-design SKU Map
		+	y // 12, 21 // SOW 7 Flag CT feature
		+	y // 12, 21 // SOW 5 Merge Com and EQuery
		+	y // 12, 21 // * SOW 6 Flexible Shipments List
		+	y // none // SOW 9 Add TMS E0 attribute
		+	y // none // SOW 10 Tune Role Admin
		+	y // 10, 18 // SOW 11 New Planner Profile
		+	n // 20 // * SOW 12 Shipments List for a Planner user
		+	? // 20 // * SOW 13 Approval related logic
		+	y // 21 // * SOW 14 Add FTL vs LTL flag and add Truck table for FTL
		+	y // 20 // * SOW 15 ASN transmit
		+	y // 13 // SOW 16 ANA report
		+	y // 20 // SOW 17 Jaguar Misc functionality
		+	y // none // * SOW 18 List of Portals and Portal Profile
		+	n // 10, 18 // * SOW 19 New Shipper Profile
		+	n // 18, 19 // * SOW 20 New ASN Form
		+	? // 20 // * SOW 21 Shipments List for a Shipper user
		+
		+	'''NOTE''': coding for some tasks can start and even be nearly complete in some cases before set B is completed. But not QA.
		+
		+	== CRWs ==
		+
		+	These are Change Request Work.
		+
		+	=== CRW 1 Introduce View Only Planner ===
		+
		+	mantis: 3808
		+
		+	spec: see below
		+
		+	BR: Add "view only" planner role.
		+
		+	Currently each planner can be Super and/or Air planner (see planners profile). This is PO Issued By specific.
		+
		+	To achieve that I suggest adding "View Only" options.
		+
		+	If "View Only" is selected then this planner has '''view only''' functionality and Super and Air planner options are disabled.
		+
		+	Such planners can only review CTs and post comments. Subject to PO Issued By visibility rules.
		+
		+	=== CRW 2 Add Client role to Portal ===
		+
		+	mantis: 3809
		+
		+	spec: see below
		+
		+	BR:
		+	1) Add ability to configure Client (view only) role users for Portals.
		+	2) Add "PO Issued By" as a condition to visibility rules.
		+
		+	=== CRW 3 Changes to Com component ===
		+
		+	mantis:
		+
		+	spec: see below
		+
		+	BR:
		+
		+	* 1) To field logic:
		+	** on Client:
		+	*** default to operator of last change
		+	*** provide choice to email to nobody or anybody from the oper/client lists
		+	** on Internal:
		+	*** default to "no email"; on submit warning: "Comment will not be e-mailed to anybody(OK, Cancel)"
		+	*** provide choice to email to nobody or anybody from the oper/client lists
		+
		+	* 2) Add Com tab to Edit CT form
		+
		+	=== CRW 4 Move Admin > ASN > Admin options to  ===
		+
		+	mantis:
		+
		+	spec: see below
		+
		+	Options found on Admin > ASN > Admin > Shipper portal tab must be Portal specific (will be part of Portal Admin) (not same for all portals):
		+	* Automatically reject shipments on New Tab after X days of inactivity
		+	* Allow Double Approval planners to download Planner's Names (ASN 1.X only)
		+
		+	Dev notes
		+	---------
		+	part A) implement change to admin
		+	part B) implement change to actual logic
		+
		+	=== UAT 2 ===
		+
		+	=== CRW 5 Enable quick user creation through Portal  ===
		+
		+	mantis:
		+
		+	spec: see below (TBD)
		+
		+	=== CRW 6 Re-design interface for Flexible Shipments List ===
		+
		+	'''mantis''': TBD
		+
		+	'''spec''': see below
		+
		+	"Mouse over header of the list and right click to show column management panel" is fine.
		+
		+	But pop up that manages visible columns and order of columns needs to be re-designed:
		+	* should have 2 panels
		+	* left panel has a list of all available fields in alphabetical order
		+	* right panel contains all visible columns (top to bottom order indicates left to right order on a  Sh.List)
		+	* fields/order of fields are to be selected through "drag and drop": drag from left to right and immediately insert on the right in appropriate position
		+	* see mock up below - picture shows two types of mouse drag and drop movements:
		+	** one is to make column visible and position where user wants to (in the same movement)
		+	** another is to re-order existing visible columns
		+
		+	[[File:Flex columns.JPG]]
		+
		+	Also:
		+	* configuration is user specific and should be remembered for each user
		+	* default config - see below
		+
		+	List of fields / order by default:
		+
		+	* For all tabs:
		+	**CT#
		+	**Mode
		+	**Sub-Mode
		+	**Pick Up Location
		+	**Delivery Location
		+	**PO
		+	**SKU
		+	**Qty
		+	**Piece Price
		+	**Total Value
		+	**Item Descr.
		+
		+	* New, Delivered, Archived:
		+	** Created On
		+	* Approved:
		+	** Approved On
		+	* Hold:
		+	** Approved For
		+	* Rejected:
		+	** Rejected On
		+
		+	Finally, super-set of fields that will be available to choose from:
		+
		+	* <all fields from above list>
		+	* Shipper
		+	* P.O Issued by
		+	* Created by
		+	* Load Number
		+	* PT Number
		+	* DT Number
		+	* Pick up Instructions
		+
		+	*Commodity description
		+
		+	*Cargo Available
		+
		+	*Cargo Due
		+
		+	*Last update date and time
		+
		+	*Pick up Trucker Name
		+
		+	*Est. Pick up date
		+
		+	*Act. Pick up date
		+
		+	*Delivery Trucker Name
		+
		+	*Est. Delivery date
		+
		+	*Act. Delivery date
		+
		+	*Num of Plt
		+
		+	*pkgs on plt
		+
		+	*Loose pkgs
		+
		+	*TTL GW (lb)
		+
		+	*Haz
		+
		+	*Stack
		+
		+	=== CRW 7a Change filters logic on Shipment List ===
		+
		+	'''mantis''': TBD
		+
		+	'''spec''': see below
		+
		+	* No need for "Apply filter" button (only use it for submitting search string) - change in filter should result in immediate re-draw
		+
		+
		+	=== CRW 7b Expand / Collapse feature for Shipments List ===
		+
		+	'''mantis''': TBD
		+
		+	'''spec''': see below
		+
		+	* No need for "Apply filter" button (only use it for submitting search string) - change in filter should result in immediate re-draw
		+	* Add "Display one line per CT" (on/off) functionality for specific CT (not all at once as we have now)
		+	** see mock up below (implement same or similar in functionality):
		+	[[File:Ct list collapsed.JPG]]
		+
		+	And if user clicks on "arrow" - see below
		+
		+	[[File:Ct list expanded.JPG]]
		+
		+	* [IMPORTANT: This is just extra bonus for now, not required!] When "Display one line per CT"=off highlight in one color all commod lines of specific CT. Alternate line highlight as in standard ZK design but not per line but per CT. See example below:
		+
		+	CT#  PO <color>
		+	123  1  gray
		+	123  2  gray
		+	555  7  white
		+	765  9  gray
		+
		+	=== CRW 8 Re-design Truck Info ===
		+
		+	'''mantis''': 0003816
		+
		+	'''spec''': see below
		+
		+	==== part A ====
		+
		+	We want to request the following info from Shippers when they submit ASN for FTL shipments:
		+	* how many trucks of what size are required to move commodities defined on ASN
		+	* what size, seal, trailer number each truck has
		+	* Typical truck size values: 48 ft, 53 ft. (manage this in Admin)
		+
		+	==== part B: ====
		+
		+	Assign commodities to each truck (as for containers)
		+
		+	Truck Info should be managed similarly to containers:
		+
		+	* lines with truck size / seal# / trailer id
		+	* assign to commod line function
		+	* note: num of trucks should be a drop down
		+	* validation: all fields are optional
		+
		+	MOTs:
		+	* Truck Dom
		+	* Truck Air
		+	* Truck Ocean
		+
		+	ASN 1 vs ASN2:
		+
		+	* on ASN 1 leave as is
		+	* implement only for ASN 2 users (Generic user)
		+
		+	Pick Up Trucker vs Delivery Trucker:
		+	* on ASN it is just one set of values
		+	* value on ASN will populate both Pick Up and Delivery trucker (in some cases there is a pool point then load is transferred from one truck to another)
		+	* on internal present both options (PU and Delivery)
		+
		+	See mock up below: (could be optimized by developer):
		+
		+	NOTE! We should also have container number to the right of checkbox as on container table.
		+
		+	[[File:Truck table.JPG]]
		+
		+	Reports:
		+	* Currently no related reports were requested
		+
		+	=== CRW 9 Re-design Container size and type admin ===
		+
		+	'''mantis''': TBD
		+
		+	'''spec''': see below
		+
		+	Add flag to each item: include or exclude item when this list shows through portal.
		+
		+	(This is to exclude "LCL" value from portal - they use it for internal)
		+
		+
		+	=== UAT 3 ===
		+
		+	=== CRW 10 New dims and CBM management v 2.0 ===
		+
		+	'''mantis''': TBD
		+
		+	'''spec''': see below
		+
		+	* Leave only per commodity line option
		+	* For option above two sub options as before: Dims and Non-Dims
		+	* Non-Dims option:
		+	** enter cbm or cft per line as is now
		+	* Dims option:
		+	** enter multiple lines per commodity item in pop-up (sick on "dims" button), system will calculate total
		+	** see mock up below
		+	** in pop-up:
		+	*** by default display one line in the pop up form for all pls (we assume they all of the same size) and one line for loose (assume same - they are of the same size); pre-fill plt count and loose count; see mock up - pop up is for line one
		+	*** user can add/remove lines, etc as is now on similar form we use to enter dims for entire table
		+
		+	[[File:Dims-20v2.png | 800px]]
		+
		+	Bellow pop up will show if user clicks "Dims" for first line above:
		+
		+	[[File:Dims pop up.png | 600px]]
		+
		+	=== CRW 11 Planner: Remove option to set shipment status to “NEW” on the New tab ===
		+
		+	'''mantis''':0003818
		+
		+	'''spec''': see below
		+
		+	On the Planner Shipment List NEW tab – remove the option to set approval status to NEW. Also in detailed view remove the button “set new” for shipments that are already NEW.
		+
		+	[[File:Eliminate New 1.jpg]]
		+	[[File:Eliminate New 2.jpg]]
		+
		+	=== CRW 12  – Add confirmation when sending ASN transmit to external 3PL.  ===
		+
		+	'''mantis''': 0003819
		+
		+	'''spec''': see below
		+
		+	Once an ASN is transmitted to external 3PL, we need to add a note in the HISTORY and COM tab.
		+
		+	[[File:ASN Transmit 1.jpg]]
		+
		+	[[File:ASN Transmit 2.jpg]]
		+
		+	=== CRW 13 Planner/SuperPlanner ability to change Mode of Transport ===
		+
		+	'''mantis''':  3826
		+
		+	'''spec''': see below
		+
		+	Planner and SuperPlanner needs the ability to change the Mode of Transport when they approve shipments. This was part of the original functional requirements and is critical for the demo version.
		+
		+	See [[#Approval with Changing MOT]]
		+
		+	=== CRW 14 Support multiple currencies when entering in Piece Price ===
		+
		+	'''mantis''':
		+
		+	'''spec''': see below
		+
		+	Shippers need the ability to change the currency when entering Piece Price. This is a critical component of international ASN as we cannot force all shippers to enter in USD.
		+
		+	The shipper should be able to select the currency in the Piece Price field similar to how they can select (Lb or Kg) in Tlt GW field.
		+
		+	The Tlt Value field should then use this new currency – do not allow shipper to adjust currency in Ttl Value field. It should be read-only.
		+
		+	Currencies that need to be supported: USD (US Dollars), EUR (Euro), GBP (Great British Pound)
		+
		+	NOTE 1: If user enters value with USD selected and then changes USD to another currency there will be NO conversion of old value into the new using cur exchange.
		+
		+	NOTE 2: In the future (post Demo Ver) we need to manage list of currencies available / defaults in Portal profile.
		+
		+	=== CRW 15 Dims Management - One line case ===
		+
		+	'''mantis''':
		+
		+	'''spec''': see below
		+
		+	When entering in Dims, if there is 0 Loose pkgs or 0 Plts, then it should default only 1 line item in the Dims table. Right now, the Dims table defaults to 2 lines and assumes that a shipper will send Pallets and Loose packages.
		+
		+	The reasoning behind this is a shipper only ships Pallets, they are usually the same size so they won’t need to enter in multiple dimensions.
		+
		+	However, they will need the ability to add additional dimensions if pallets are different sizes.
		+
		+	Same holds true if they are shipping just loose packages. This change is only to modify the current default lines available to the shipper.
		+
		+	=== CRW 16 Dims Management Layout on ASN form ===
		+
		+	'''mantis''':
		+
		+	'''spec''': see below
		+
		+	Add label “Dimensions Management” to the dims radio buttons on ASN form.
		+
		+	Move the two radio buttons to right side of Commodity Description.
		+
		+	Move Mode/Submode dropdown to level vertically with button of Created By textbox.
		+
		+	Add sentences next to “Non-Dims” and “Dims” radio buttons to describe functionality.
		+
		+	=== CRW 17 Total GW should be 2 decimal places ===
		+
		+	'''mantis''':
		+
		+	'''spec''': see below
		+
		+	Total GW should be 2 decimal places as that is an industry standard.
		+
		+	It currently displays a 3 decimal places.
		+
		+	=== CRW 18 ASN Form (layout) ===
		+
		+	'''mantis''':
		+
		+	'''spec''': see below
		+
		+	Move Ttl HU, Cubic M, Cubic Ft to right side of Ttl Value.
		+
		+	Most shippers do not enter in dimensions until after they’ve entered weight & price, so this is just to conform to their normal day-to-day processes.
		+
		+	=== CRW 19 Download to Excel – mimic flexible shipments list ===
		+
		+	'''mantis''':
		+
		+	'''spec''': see below
		+
		+	They want the Download to Excel feature to mimic flexible shipments list design.
		+
		+	Instead of the current popup where users select fields, they want it to look like the flexible shipments list and they want the “selected” and “not-selected” fields to default to the current state of the user’s shipment list configuration.
		+
		+	=== CRW 20 ASN Form – Add UNDEFINED to Mode/Submode dropdown list  ===
		+
		+	'''mantis''':
		+
		+	'''spec''': see below
		+
		+	When a shipper enters in an ASN, rather than leave this dropdown blank to force the Planner/SuperPlanner to assign a MOT – Simon/Marc wants it to be replaced with UNDEFINED and wants it to default to UNDEFINED.
		+
		+	=== CRW 21 Hide Meters & Feet from optional units of value in Dims module ===
		+
		+	'''mantis''':
		+
		+	'''spec''': see below
		+
		+	Marc and Simon were very adamant about hiding this option from the Dims module. Rather than deleting the option, can we think about hiding it in the dropdown for both internal CT2 & ASN2.0?
		+
		+	=== CRW 22 Shipments List header should be sizable ===
		+
		+	'''mantis''':
		+
		+	'''spec''': see below
		+
		+	Column width on Shipments List should be sizable (as on Client App).
		+
		+	See mock up below:
		+
		+	[[File:Resizable columns.JPG]]
		+
		+	PIN
		+	---
		+	Width for every column will be saved (user specific).
		+
		+	=== CRW 23 Re-design Haz feature ===
		+
		+	'''mantis''':
		+
		+	'''spec''': see below
		+
		+	* add Haz/Non-haz flag to each commodity item
		+
		+	* "CT level Haz/non haz flag" (existing) will not be editable by user anymore - it will be calculated based on the Rule below:
		+
		+	"HNH Rule: If at least one commodity line is Haz then entire shipment is Haz"
		+
		+	* if planner is splitting ASN and forming new CTs then system will analyze each new CT and set CT level haz/non-haz option to haz or non-haz based on the Rule above
		+
		+	* implement above for both ASN 2.0 and Internal
		+
		+	* (!) also, add "Hazardous Note" text field to ASN form (please note that such field already exists in DB and on internal - see "Gen Tab. 23. Hazardous Note")
		+
		+	=== CRW 24 Changes to Portal Admin. Transport Mode Tab and related ASN Form validation ===
		+
		+	'''mantis''':
		+
		+	'''spec''': see below
		+
		+	1) ASN Admin Portal > Transport Modes Tab > item > default option > Transmit To dropdown will have option "none".
		+
		+	In this case Client Company dropdown will be hidden.
		+
		+	This will mean that any other configurations as far as rules are invalid - see also below.
		+
		+	2) On ASN Form, on Save system will validate 4 fields (Shipper, Consignee, Pick Up Location, Delivery To) against equivalent filters defined on Transport Modes Tab. If they do not match error will be produced:
		+
		+	You are not allowed to create ASN with such combination of Shipper, Pick Up Location, Ship To Location values.
		+	Please change one  or all of these fields and re-submit.
		+
		+	== To do ==
		+
		+	* case
		+	** CT created.
		+	** Approval logic changed.
		+	** What approval logic to apply? Current logic.
		+
		+	* Change of settings in portal profile will not propagate into existing shipper/planner. Is this OK?
		+
		+
		+	== Misc ==
		+
		+	https://docs.google.com/spreadsheet/ccc?key=0Am72_c2KUoQjdFc2NTNTcjhyZEFrVVdSSkdFTFVxZXc#gid=9

---

Current revision as of 16:48, 19 February 2015

Contents 1 About 2 Preliminary Remarks 2.1 Core Needs 2.2 ASN 2.0 vs ASN 1.X 2.3 ASN 2.0 vs International Portal 2.4 Rapid development for ASN 2.0 2.5 Demo version first 3 Misc Set 1 3.1 Add Clone User feature 3.2 Add Create GRP action to Virtual Group 3.3 Create and consolidate TMS and ASN Admins 3.4 Re-design SKU Map 3.5 Flag CT feature 3.6 Merge Com and EQuery 3.7 Flexible Shipments List 4 Misc Set 2 4.1 Add TMS E0 attribute 4.2 Tune Role Admin 5 Misc set 3 5.1 ASN transmit 5.2 Logs 6 Portal 6.1 List of Portals and Portal Profile 6.1.1 Mapping 7 Shipper Related Functionality 7.1 New Shipper Profile 7.2 New ASN Form 7.2.1 Add mode and submode 7.2.2 Truck and container tables on ASN form 7.2.2.1 Add FTL vs LTL flag 7.2.2.2 Add Truck table for FTL 7.2.2.3 Add Container table for FCL 7.2.3 On submit algorithm 7.2.4 Preview and Confirmation Screen 7.2.5 Email Notifications on ASN submit 7.2.6 ASN info access after submit 7.3 New dims and CBM management 7.4 Shipments List for a Shipper user 8 Planner Related Functionality 8.1 New Planner Profile 8.2 Shipments List for a Planner user 8.3 Approval related logic 8.3.1 Approval algorithm 8.3.2 Approval with Changing MOT 8.3.3 Approval types summary 8.3.4 Air Approval Type 8.3.5 No Approval Type 8.3.6 After Approval logic 8.3.7 Notifications by Planner 9 Jaguar Operator Related Functionality 9.1 ANA report 9.2 Jaguar Misc functionality 10 ASN 20 Misc 10.1 Cargo Due and Cargo Available Dates 11 Final Tasks 11.1 Add Standard Archiving and Logs 11.2 Add E0 specific Pick Up and Delivery Addresses 11.3 VG number feature (Optional task) 12 Statements Of Work 12.1 SOW 1 Create new branch for this project from trunk; create envir for QA/SIT/UAT 12.2 SOW 2 Add Clone User feature 12.3 SOW 3 Misc: Add Create GRP action to Virtual Group 12.4 SOW 4 Create and consolidate TMS and ASN Admins 12.5 SOW 8 Re-design SKU Map 12.6 SOW 7 Flag CT feature 12.7 SOW 5 Merge Com and EQuery 12.8 SOW 6 Flexible Shipments List 12.9 SOW 9 Add TMS E0 attribute 12.10 SOW 10 Tune Role Admin 12.11 SOW 11 New Planner Profile 12.12 SOW 12 Shipments List for a Planner user 12.13 SOW 13 Approval related logic 12.14 SOW 14 Add FTL vs LTL flag and add Truck table for FTL 12.15 SOW 15 ASN transmit 12.16 SOW 16 ANA report 12.17 SOW 17 Jaguar Misc functionality 12.18 SOW 18 List of Portals and Portal Profile 12.19 SOW 19 New Shipper Profile 12.20 SOW 20 New ASN Form 12.21 SOW 21 Shipments List for a Shipper user 12.22 SOW 22 New dims and CBM management 13 Dependencies for SOWs 14 CRWs 14.1 CRW 1 Introduce View Only Planner 14.2 CRW 2 Add Client role to Portal 14.3 CRW 3 Changes to Com component 14.4 CRW 4 Move Admin > ASN > Admin options to 14.5 UAT 2 14.6 CRW 5 Enable quick user creation through Portal 14.7 CRW 6 Re-design interface for Flexible Shipments List 14.8 CRW 7a Change filters logic on Shipment List 14.9 CRW 7b Expand / Collapse feature for Shipments List 14.10 CRW 8 Re-design Truck Info 14.10.1 part A 14.10.2 part B: 14.11 CRW 9 Re-design Container size and type admin 14.12 UAT 3 14.13 CRW 10 New dims and CBM management v 2.0 14.14 CRW 11 Planner: Remove option to set shipment status to “NEW” on the New tab 14.15 CRW 12 – Add confirmation when sending ASN transmit to external 3PL. 14.16 CRW 13 Planner/SuperPlanner ability to change Mode of Transport 14.17 CRW 14 Support multiple currencies when entering in Piece Price 14.18 CRW 15 Dims Management - One line case 14.19 CRW 16 Dims Management Layout on ASN form 14.20 CRW 17 Total GW should be 2 decimal places 14.21 CRW 18 ASN Form (layout) 14.22 CRW 19 Download to Excel – mimic flexible shipments list 14.23 CRW 20 ASN Form – Add UNDEFINED to Mode/Submode dropdown list 14.24 CRW 21 Hide Meters & Feet from optional units of value in Dims module 14.25 CRW 22 Shipments List header should be sizable 14.26 CRW 23 Re-design Haz feature 14.27 CRW 24 Changes to Portal Admin. Transport Mode Tab and related ASN Form validation 15 To do 16 Misc

[edit] About

This wiki defines both Requirements and Solution for ASN 20 project.

Primary audience - Development Team (leads, developers) and Product Team (prod manager, business analysts).

Author: alex@jaguarfreight.com

[edit] Preliminary Remarks

[edit] Core Needs

Copied from #ASN 20 BR wiki.

ASN 20 will extend ASN 1.X to provide the following functionality - see below.

• extend Shipper / ASN / Planner / Jaguar Ops functionality to:
  • other MOTs (Air, Ocean, etc)
  • any Client Company

• add some additional features (such as Additional MOT Air approval)

• introduce some changes (such as FTL/LTL logic)

• some not directly related to ASN functionality (such as merging Com and EQuery)

[edit] ASN 2.0 vs ASN 1.X

ASN 2.0 is an extension of ASN 1.X functionality.

This wiki maintains focus on explaining what to add and change without repeating in details what to carry over from previous version (ASN 1.X). At the same time I do briefly mention some of the major functionality that needs to be preserved.

[edit] ASN 2.0 vs International Portal

Originally this scope was kept under larger International Portal project. Most recently it was decided to extract ASN related functionality and implement it as soon as possible. This project is to be called ASN 2.0.

Some features that were developed or half-developed under I-Portal such as Flexible CT editor, merging of Client and Internal App were put on hold and are out of scope for this project.

Some features such as new User Roles Manager will be used for this module. But some adjustment is required (example: some Roles will be defined as Flexible and some as Built In).

Also we need to clearly define in the system option for Truck Domestic mode: TMS vs non-TMS.

[edit] Rapid development for ASN 2.0

We should try to take such development approach that allows for rapid first version that could change after we get additional understanding soon after (if we sell this solution). Ideally code that we write should not affect existing code that already supports ASN 1.X and CT2. Same would be true for database structure that supports existing data.

[edit] Demo version first

It is requested to produce demo version first (limited set of features, no need for production quality) within first 4-5 weeks of development.

[edit] Misc Set 1

These are Non Core (Peripheral) tasks.

[edit] Add Clone User feature

BR: ASN_20_BR#Add_Clone_User_feature

On UI level there would be "Clone" button on Admin > Users Admin panel.

Selecting one user and pressing "Clone" would open up Add New User panel with all info pre-populated from selected user except (these fields should be empty):

• username
• First / Last name
• password
• SkypeId
• birthday
• phone

Note to Developer
-----------------
We used to have this feature. After we merged Jag and Non-Jag profiles it disappeared. 
Search for this code and re-use if possible.

Post Impl Notes.

Implemented as defined in spec.

[edit] Add Create GRP action to Virtual Group

BR: ASN_20_BR#Add_Create_GRP_action_to_Virtual_Group

See mock up below.

On "Create GRP" load "Add shipment group" window:

• List all CT numbers there.
• if all CTs have same E0 and MOT then pre-fill these fields
• if these CTs can't be grouped together provide Error message (try to re-use existing logic/code)

[edit] Create and consolidate TMS and ASN Admins

Create and consolidate TMS Admin

1) Create Admin > TMS menu item

2) Move Admin > Client Application > Admin > TMS to Admin > TMS

3) Associate Trailer payload Admin with TMS:

Move Admin > Transportation > Trailer Payload panel to Admin > TMS

Create and consolidate ASN Admin

1) Create Admin > ASN menu item

2) Move Admin > Client Application > Admin > Shipper Portal to Admin > ASN

[edit] Re-design SKU Map

SKU Map.

"SKU Map" aka "SKU to Planner mapping" as defined in ASN 1X is a table (uploaded in the form of xls) that links unique SKU# to SKU description and to planners name.

It provides auto-suggest for SKU description on ASN form and planner filter for List CTs under Planners login.

It was required only for CTs that are associated with one particular PO Issued By value.

Link to ASN 1X spec: ASN_1.X#SKU_to_Planner_Mapping_Feature.

SKU Map browser.

We need to add one simple important table: history of uploaded files with ability to View files and with these attributes per File entity:

• file-name
• file size
• time-stamp when uploaded
• who uploaded (username)

Currently, it is not possible to see even currently uploaded xls.

Figure below suggests possible UI design to satisfy stated functionality.

• Upload button - to upload new files.
• View button - to view existing.

Option with No:

Option with Yes:

[edit] Flag CT feature

BR/ISA: ASN 20 BR#Flag CT feature

[edit] Merge Com and EQuery

BR/ISA: ASN 20 BR#Merge Com and EQuery .

[edit] Flexible Shipments List

BR/ISA: ASN 20 BR#Flexible Shipments List.

[edit] Misc Set 2

[edit] Add TMS E0 attribute

Currently "TMS solution" supports only one Client Company (E0) at a time - we can not send shipments to TMS that are identified by more than one E0 - this case is not defined - no code or business process exists to handle this case properly. This restriction will remain in ASN 2.0.

We need to add parameter to the system that defines clearly what E0 "is linked to" Descartes TMS currently. This will help in :

• reporting
  • for example for DR/KPI reporting we will know in this case what CTs are linked to cost that we receive from TMS vs costs entered by operators. It is important because we keep these costs in different database tables for these two cases.

• validation
  • to make sure we do not send CTs from more than one E0 to TMS

See mock up below.

[edit] Tune Role Admin

Add Role Type attribute: Built In vs User Defined User Roles.

We have to distinguish between Built In and User Defined User Roles.

Also this should be obvious for the user - what role is of what type.

This is a new attribute of User Role Entity.

User Defined Role is a role that can be created and fully defined by user through Admin > Security > User Roles panel.

See UI changes on the Figure below:

1 - change button label

2 - add "Role Type" column

Add Generic Shipper and Generic Planner Built In User Roles.

Currently the only Shipper and related Planner roles defined in the system are "EA Shipper" and "EA Planner". These are built in roles.

They currently support only Elizabeth Arden (EA) Domestic Trucking workflow.

Since it is intention to increment/change EA workflow and also to add support for any Client Company without distracting existing operations we need to create two new built in roles "Generic Shipper" and "Generic Planner" that would fully satisfy ASN 2.0 requirements.

See #3 and #4 on the Figure above.

Deploy this into production. After release we should:

• EA Shipper
• EA Planner
• Generic Shipper
• Generic Planner

At that point In production we could:

• start creating new Generic Shippers/Planners for any E0
• transfer all users from EA Shipper to Generic Shipper
• transfer all users from EA Planner to Generic Planner
• remove EA Planner, EA Shipper (in the following Rel to Prod)

Important Note to Developer
------------------------
Code should be re-used by both EA and Generic Shipper/Planners. 
Obviously we should not create separate similar code for EA vs Generic roles.

[edit] Misc set 3

[edit] ASN transmit

BR/ISA: ASN_20_BRBA#ASN transmit

ASN transmit: Admin

Admin user should be able to add ASN Transmit Option.

Each ASN Transmit Option has the following attributes:

• Name
  • defined by user text; examples: Jaguar(CT2), Panalpina(3PL)

• Type
  • possible values: {System, User Defined}
    • System - hard coded option; for now it is only one: Jaguar(CT2)
    • User Defined - user can add and define options in this admin

• Method
  • for "Jaguar(CT2)" it should say "native/internal". In this case CT2 will internally open access to CT record to Jag Ops
  • for all user defined it should provide drop down with one option: "email"

UI mock up: TBD.

Components using this:

• #Create and Submit ASN Form
• #Portal Profile: MOT Settings

ASN transmit: email option

option 1) One e-mail will have two attachments:

• commodity info
  • utilize existing "Download to xls format" but remove totals info

• non-commodity info
  • create similar format to above but list attribute/value vertically

option 2) One e-mail will have one attachment

[edit] Logs

Both Drill down and naming (!) in "Events posted from > ASN Portal" should emulate what we have in in Main Menu > Admin > ASN.

To keep it simple you could have:

• Events posted from > ASN (root)
• Events posted from > ASN > Admin > Asn Misc
• Events posted from > ASN > Admin > Portals
• Events posted from > ASN > ASN Records (updates to all CTs that would include all shipper updates and all planner updates)
• Events posted from > ASN > ASN Users OR Events posted from > Admin > Users (all ASN related updates to users)

[edit] Portal

ASN Portal is created for particular Company and its Supply Chain. Example: EA.

Therefore we need to create such entity in the system so we can define all properties associated with it.

We could have used Client Company E0 for that purpose but unfortunately we sometimes create multiple E0s for the same Company/Supply Chain. For example for EA we have:

• "EA DOM PORTAL" E0 for USA Trucking Domestic shipments
• "Elizabeth Arden" E0 for Air and Ocean shipments

So in the case above we will create Portal named "EA" and associate it with all relevant E0s: in this case "Elizabeth Arden" and "EA DOM PORTAL".

[edit] List of Portals and Portal Profile

List of Portals

Add this to Admin > ASN .

This is a panel that lists all existing Portals in the system.

Each portal listed with some additional information:

• number of linked E0s
• number of linked users that are just Shippers
• number of linked users that are just Planners
• number of linked users that are both Shippers and Planners

On "Add" or "Edit" system shows #Portal Profile.

See mock up below.

Portal Profile

Portal Profile has several sections - see below.

Note to developer
-----------------
I suggest that we implement UI similarly to Client Companies:
a) Add/Edit results in a pop-up window.
b) We utilize a mix of <tabbox/> and <groupbox/> with <caption/> to present various sections.

Portal Profile: General Settings Section

In this section the following 3 parameters have to be defined:

• Portal Name:
  • user will name it here

• Portal Note:
  • some useful memos could be posted here to preserve knowledge for other admin users

• Related E0s:
  • list of E0s that would be used "under this Portal"

See UI mock up below.

Portal Profile: MOT Settings Section

In this section we define all desirable configurations under specific portal that relates to the following parameters:

• MOT:

- "native" to CT2 MOTs

• Synonym (mode) and Synonym (sub-mode)

- this combination is just a synonym for MOT

- two values define two dropdowns on ASN form

• From:

- options:

- Regions (multi with any)

- Countries (multi with any)

- Shippers (multi with any)

- see also #ASN transmit

• To:

- options:

- Regions (multi with any)

- Countries (multi with any)

- Consignees (multi with any)

- see also #ASN transmit

• Transmit To:

- see also #ASN transmit

• Link to E0:

- see explanation here: #Portal

[edit] Mapping

Origin Region/Country should map to country in Pick Up location.

Destination Region/Country should map to country in Ship To location.

Developers Note
--------------
Per Kostya's suggestion:
* def: let's call each line a "rule"
* all "rules" defined in the table are ordered
* rules at the top have higher precedence that those at the bottom
* default "rule" would be added to cover cases that are not defined

See UI mock up below.

List:

Edit:

Portal Profile: Approval Settings Section

Specific portal could have option to transmit all ASNs to 3PLs for transportation as they get submitted by Shippers or could provide separate layer for approval workflow:

• option 1) All ASNs will be transmitted to 3PLs for transportation automatically
• option 2) At least some ASNs needs to go through approval process

If option 2 is selected then additional information needs to be defined such as:

• PO Issued By list
• approval mode for every PO Issued By/MOT combination

- possible values: {Auto, Single, Double}

• Air Approval and Cargo Due date settings

UI mock-up:

Note to developer
-----------------
Feel free to implement another UI equivalent to above.

Edit or Delete Portal

Select portal from #List of Portals and apply action.

Make PO Issued By List Portal specific

This feature is already in the system.

Since every Supply Chain/Company has its own PO Issued By List it has to be defined in Portal profile - see #Portal Profile.

Since approval type will be Portal specific we have to move related parameters there as well - - see #Portal Profile.

Existing list is located under Admin > Transportation > PO Issued By.

It needs to be again defined for Portal once we migrate from EA Shipper to Generic Shipper.

SKU Map should be PO Issued By specific and Portal specific

This feature is already in the system.

Now SKU Map should become Portal specific - see #Portal Profile: Approval Section.

Y vs N indicate if SKU Map is used for selected PO Issued By or not.

SKU Map is not required feature therefore default is N.

On "Add" the following pop-up will be produced - see #Re-design SKU Map.

[edit] Shipper Related Functionality

[edit] New Shipper Profile

Shipper Profile: General section

We have the following fields:

• Portal:
  • change: used to be linked to (create ASNs for) one E0

• Shipper (T1):
  • remains the same

• Shipments weight in:
  • remains the same

See mock up below.

Shipper Profile: Portal specific section

For every Portal defined in General section we can define the following:

• Approval mode for every PO Issued By/MOT combination
  • By default these settings are taken from Portal profile

• Air Approval and Cargo Due date settings
  • By default these settings are taken from Portal profile

• Available MOT setting
  • we define can Shipper select mode at all or not
  • if Yes then we define what mode (out of defined in Portal modes) he can select

See mock up below.

[edit] New ASN Form

ASN form and logic: list of changes.

Here is a brief list of changes for ASN form and on submit logic:

• Add mode/sub-mode fields
• Show truck table for FTL
• Show container table for FCL
• on submit create CT records based on new special algorithm
• new dims and CBM management

ASN form mock up.

See below mock up for Ocean FCL case.

[edit] Add mode and submode

Add (Transport) "Mode" + "Sub-Mode" as defined through "MOT synonym" - see #Portal Profile: MOT Settings Section.

[edit] Truck and container tables on ASN form

[edit] Add FTL vs LTL flag

[edit] Add Truck table for FTL

BR:

We want to request the following info from Shippers when they submit ASN for FTL shipments:

• how many trucks of what size are required to move commodities defined on ASN

PIN:

The following design has been implemented:

NOTE: see also #CRW 8 Re-design Truck Info (pendng)

[edit] Add Container table for FCL

[edit] On submit algorithm

If ASN is associated with E0 that is associated with TMS (see #Add TMS E0 attribute)

Then keep existing ASN 1.X logic (create separate CT for each commodity table)

Else create one CT with multiple lines in commodity table (as defined on ASN form).

This CT will have status new and appear under radar of appropriate planners.

[edit] Preview and Confirmation Screen

Preserve such logic defined in ASN 1.X.

Show these screens on submit:

• Preview Screen
• Confirmation Screen

See it defined here: ASN 1.X#Create_CT_record. (NOTE: This wiki might not be completely up to date, functionality in production is more relevant).

[edit] Email Notifications on ASN submit

Send Notification email to Shipper who created record on ASN submit (as defined in ASN 1.X).

[edit] ASN info access after submit

To remind once ASN is submitted the following could happen in terms of ASN info access:

• if no approval process defined then:
  • CT record created based on ASN will show up on #ANA report or be transmitted to other 3PLs

• if approval process is defined then:
  • CT record created based on ASN will become available to Jag Ops or other 3PLs
  • It will become available for planners for approval process

In both cases above shipper user can edit CT record until "ASN locked for edit condition":

• Actual pick up date is set.

[edit] New dims and CBM management

To do that:

• add selector "Define volume/dims for each commodity line (Y/N)?"
  • if N then functionality is the same as on internal (see Table B and Dims/Non-Dims selector)
  • if Y then see below
    • each commodity line is incremented with fields W,H,L,Unit(for L,W,H),total(in cbm),total(in cft)
    • calculate / display total for entire com table (in both cbm and cft)
    • provide Non-Dims option (to enter volume, not calculate) per commodity line

• use same functionality for both internal and Client Apps (= it must behave same way on both Client and Internal)

[edit] Shipments List for a Shipper user

Add mode and sub-mode columns and filters.

Preserve existing logic. See ASN_1.X#View_list_of_CT_records_as_a_shipper.

But need to add mode and sub-mode columns.

See (1) and (2) on mock up below.

Add Display one line per CT option.

If un-selected then show all commodity items.

If selected then fields that have different values across commodity items should show "var" (for various) and ideally on mouse over show all values.

See (4) on a mock up below.

Shippers UI in case of multiple Portals.

In this case Shipper need to choose from the list of Portals to see shipments for particular Portal.

See (3) on a mock up below.

This is due to business requirement to not mix CTs within different Portals.

Edit, Clone, Delete CT records as a Shipper

Preserve existing logic. See ASN_1.X#Core Shipper Functionality.

Shipments List mock up.

See mock up below.

[edit] Planner Related Functionality

[edit] New Planner Profile

Each Planner is associated with multiple Portals.

Under each Portal we need to define his role separately for each PO Issued By.

See mock up below.

Planners that handle #Air Approval Type defined as Air Planners.

[edit] Shipments List for a Planner user

Preserve existing functionality: ASN_1.X#View_list_of_CT_records_as_a_planner

Planners UI in case of multiple Portals.

Please apply same approach to UI as for Shipper in this case.

Add type of planner to UI.

Add type of planner to Planner UI.

It should be a simple label. Examples:

• You are a Super Planner
• You are a Regular and Air Planner

Shipments List for a Planner mock up.

See below.

Additional features (1),(2),(3),(4) are defined in #Shipments List for a Shipper user

[edit] Approval related logic

Preserve existing functionality: ASN_1.X#Authorize_CT_records.

See also ASN_1.X#Double Approval Process Feature.

Also introduce some additional functionality and changes as defined below.

[edit] Approval algorithm

"Under one ASN" (decision will be made for one ASN at a time) planner might set different status for every commodity line. Every time Planner process multiple lines:

• create one CT for all rejected records
• create one CT for all on hold records
• create one CT per MOT for all approved records

NOTE: all commodities that are combined in one CT must have same "header" info (origin, destination, etc).

Notes to developer.
-------------------
1) CT# that was created from ASN originally will not be re-used in above process or not.

Approval options:

• through Shipments List
• through View CT pop-up

IMPORTANT: If ASN is not approved completely first time by planner (all items) then clear Truck Info and Container Info since it is relevant only if all commodities are moved together.

[edit] Approval with Changing MOT

Planner can change MOT when he is changing the status from New to another status.

Planner can not approve shipment with Undefined mode.

MOT can not be changed after CT is approved.

[edit] Approval types summary

• single - defined in ASN 1.X
• double - defined in ASN 1.X
• no approval - new type - see below
• air approval - new type - below

[edit] Air Approval Type

This is an additional layer of approval for Air shipments that is required before CTs become visible to Jag Ops.

CTs created by Shipper Users that have this approval type selected would require Planner User who's is "Air Planner" to approve these shipments.

[edit] No Approval Type

This is a.k.a. Auto Approval.

CTs created by Shipper Users that have this approval type selected would be automatically available for Jag Ops bypassing any approval layer (unless Air Approval is required).

[edit] After Approval logic

Reminder that once CT is approved one of these two things would happen:

• it becomes available on dashboard for Jaguar Ops
• it is transmitted to other 3PLs

[edit] Notifications by Planner

Preserve ASN 1X notifications:

• http://ct.jaguarfreight.com/wiki/ASN_1.X#Functionality_Overview_3

[edit] Jaguar Operator Related Functionality

There are number of changes required on internal for ASN 20 version. See below.

[edit] ANA report

As in ASN 1X shipments that are approved (or not require approval) are ready for Transportation and need to come under radar of operators so that they can be handled.

This is achieved by Approved But Not Actioned shipments Dashboard Report (aka ANA Report).

It is similar in spirit and functionality to TDS Dashboard in ASN 1X for TMS (Truck Dom Stats) shipments for EA.

Newly approved shipments should appear on DR and stay there until they are noticed and acted on by an operator.

NOTE 1: TMS CTs should not be a part of this report as they are part of TDS.

NOTE 2: Only non-transmit CTs should be included.

ANA report level 1

Information is structured by Client and by #Transport Mode.

See mock up below.

For every such group of shipments two counters provided in the form of X/Y.

ANA status

ANA - approved (but not yet actioned);

CT has AR status if both conditions below are met:

• approved: CT "passed approval process" - approved by all planners involved or no approval was required

• not actioned: Pick Up Trucker not assigned AND CTs not grouped AND Master not created AND none of Ref Num is assigned

Note: the current set of conditions for EA International Portal to include a CT to the report (per Kostya, --Andrei 11:40, 19 February 2015 (EST)):

s = s + "gs.TransportModeId IN (2,3,4,5,6) AND " +
                   "gs.IsApprovedByPlanner = 1 AND " +
                   "NOT gs.ActualDeliveryDate > '0000-00-00' AND " +
                   "gs.AirlineId IS NULL AND gs.SteamshiplineId IS NULL AND " +
                   "NOT gs.EstimatedDepartureDate > '0000-00-00' AND NOT gs.ActualDepartureDate > '0000-00-00' AND ";
---
all MOTs excluding UNDEF + Trucking
Approved
ActualDeliveryDate not set
Airline + Steamshipline = Empty
EstimateDepartureDate + ActualDepratureDate = Not Set

ANA report level 2

Display (as on TDS):

• shipments with details (selected attributes)
• filters

Note that the following columns have been added in ASN 20:

• MOT
• Orig country
• Dest country
• CBM
• Haz, Y/N

Note that the following filters have been added in ASN 20:

• Portal
• Client E0
• Status
• MOT

Add to table below and filters.

Please note that in comparison with TDS there are no tabs here.

Instead there is a label identifying Client E0 and ANA status.

See mock up below:

ANA report on Reports Scheduler

Should be managed through Reports Scheduler (with dashboard option).

Filters:

• E0 multiselect - limits list of client companies available on DR
• MOT multiselect - limits list of MOTs available on DR - see below

E-mail option was not requested so please disable that option.

Dev Note
--------
Existing framework will be reworked.

[edit] Jaguar Misc functionality

Add some fields on Internal to Gen Tab

All new fields defined for AS 20 needs to be shown/managed on internal (at the bottom of Gen Tab for all MOTs):

• cargo available
• cargo due
• planner (uname/fname/lname)
• shipper (uname/fname/lname)
• PO Issued By
• Approval type

Notifications by Jag Ops.

The following ASN 1X notification should remain:

• on Trucker assign (by Jag Ops) - email to Shipper

[edit] ASN 20 Misc

[edit] Cargo Due and Cargo Available Dates

• Cargo Available Date
  • required field on ASN form
  • required for all MOTs

• Cargo Due Date
  • required when CT is approved
  • required for all MOTs
  • please note that this date can be disabled/enabled in Portal profile

[edit] Final Tasks

[edit] Add Standard Archiving and Logs

• For all new entity admins Standard Archiving functionality needs to be implemented
• All user actions needs to be logged using Standard Logs

[edit] Add E0 specific Pick Up and Delivery Addresses

On ASN Form it would make most sense to display only Pick Up (Origin Door) and Delivery (Destination Door) Locations that are relevant to specific Supply Chain (E0).

These two lists could be defined in a Client Company profile.

One Shipper normally has many Pick Up and many Delivery Locations of course so wee need multiselect on UI.

Add these controls to a separate tab.

We also have to provide alternative to use addresses defined here or any address from Address book.

To achieve that:

• create 2 radio buttons separately for Pick Up and Delivery
• option 1: "Use addresses defined here"
• option 2: "Use Pick Up (T4 list) and Delivery Locations (T7 list) from CT2 Address Book"

Default is option 2 and therefore shippers will choose from any address available in the system.

[Mock Up TBD]

[edit] VG number feature (Optional task)

Add possibility to generate unique number associated with current VG.

Benefits:

• it works like "saved filter": by entering this number operator can quickly re-create CT list and continue working with this group
• helps in communication between operators
• helps in communication between operators and non jaguar users
• can be used in the future:
  • to generate docs, in accounting docs
  • each shipment leg can be associated with separate VG and hold specific to that leg values

Notes:

• • see mock up below
  • button "Generate" - see 1
  • VG Note (hint on what type of CTs are in this group) - see 2

• Display list of generated VG numbers:
  • show it under Main menu > Virtual Group > History
  • display a table
  • columns:
    • date/time
    • VG #
    • who generated
    • VG Note
  • most recent records first
  • checkbox filter: show my VG only

[edit] Statements Of Work

[edit] SOW 1 Create new branch for this project from trunk; create envir for QA/SIT/UAT

mantis: 0003680

Call it "ASN 20".

[edit] SOW 2 Add Clone User feature

mantis: 0003753

spec: ASN_20_Solution#Add Clone User feature

[edit] SOW 3 Misc: Add Create GRP action to Virtual Group

mantis: 0003754

spec: ASN_20_Solution#Add Create GRP action to Virtual Group

[edit] SOW 4 Create and consolidate TMS and ASN Admins

mantis: 0003755

spec: ASN_20_Solution#Create and consolidate TMS and ASN Admins

[edit] SOW 8 Re-design SKU Map

mantis: 0003756

spec: ASN_20_Solution#Re-design SKU Map

[edit] SOW 7 Flag CT feature

mantis: 0003757

spec: ASN_20_Solution#Flag CT feature

[edit] SOW 5 Merge Com and EQuery

mantis: 0003758

spec: ASN_20_Solution#Merge Com and EQuery

[edit] SOW 6 Flexible Shipments List

mantis: 0003768

spec: ASN_20_Solution#Flexible Shipments List

[edit] SOW 9 Add TMS E0 attribute

mantis:

spec: #Add TMS E0 attribute

Non critical bugs:

1) When entering filter it shows finded E0 and clear entered info in filter box

2) If change E0 in admin settings, then system will send all early approved CTs for this Client company to TMS. Also it should corectly works for CTs editing.(after editing send to TMS or not)

functional should be tested after all other changes on ASN portal

5) In log records "Old Value" is always "null"

[edit] SOW 10 Tune Role Admin

mantis:

spec: #Tune Role Admin

Non critical bugs/QA Notes:

1) "Also this should be obvious for the user - what role is of what type." regular user can't see what type of role is "build in" what is "User defined" in "users admin" is no mentioned.

2) In cpecification is no information about is "build in" roles are editable or not ? I think if somebody will edit "build in" role and would like to save it, system should propose to save it with another name.

[edit] SOW 11 New Planner Profile

mantis:

spec: #New Planner Profile

Non critical bugs:

"1) Is ""Super planner"" should not be set and read only in case of ""single approval procces"". What is should be ""by default"" for auto approval PO issues ?(should it be by default ""super planner"")"

2)Align "Authorize CT with PO Issued By:" dropdown(selector with whole element)

3)Align "Portals" and "Properties" or add some separator between them.

QA notes:

третья стадия апрува:

"air approval" нет описания, у него тоже будут супер планер и бейсик планер или общие с другим МОТ (бесик, супер) ???

"каким образом planner будет связан с порталами ? (у шипмента будет маркер каким порталом он создан ?)"

[edit] SOW 12 Shipments List for a Planner user

mantis:

spec: #Shipments List for a Planner user

[edit] SOW 13 Approval related logic

mantis:

spec: #Approval related logic

[edit] SOW 14 Add FTL vs LTL flag and add Truck table for FTL

mantis:

spec: #Add FTL vs LTL flag and add Truck table for FTL

[edit] SOW 15 ASN transmit

mantis:

spec: #ASN transmit

[edit] SOW 16 ANA report

mantis:

spec: #ANA report

[edit] SOW 17 Jaguar Misc functionality

mantis:

spec: #Jaguar Misc functionality

[edit] SOW 18 List of Portals and Portal Profile

mantis:

spec: #List of Portals and Portal Profile

Non Critical bugs:

"Transmit To:" is always "Jaguar CT2" hard coded but should be list from SOW 14 (critical)

1)When "All ASNs will be transmitted to 3PLs for transportation automatically" option is enabled then better to show options "Approvals" for "PO issue by" like "Auto"

2) No LOG records for this admin

3) It's possible to create few identical "transport modes" with the different "Transmit To:", how system will behave itself in this case ?

4) Mouse click on "Rules" for "transport modes" should select not only this particular rules but a common MOT also, so when user will try to edit it he get an admin panel for correct record.

Questions:

Зачем три столбца с МОТ ??? Почему описано "- Regions (multi with any) - Countries (multi with any) - Shippers (multi with any)" а на макете только страна ?

[edit] SOW 19 New Shipper Profile

mantis:

spec: #New Shipper Profile

[edit] SOW 20 New ASN Form

mantis:

spec: #New ASN Form

[edit] SOW 21 Shipments List for a Shipper user

mantis:

spec: #Shipments List for a Shipper user

[edit] SOW 22 New dims and CBM management

mantis:

spec: #New dims and CBM management

[edit] Dependencies for SOWs

• Column A: <y/n: Can coding be STARTED before all tasks in set B completed?>
• Column B: <set B:list of tasks (SOW#s) that must be completed before task A can be COMPLETED>
• Column C: <task A>

column A // column B // Column C
------------------------------
y // none // SOW 1 Create new branch for this project from trunk; create envir for QA/SIT/UAT 
y // none // SOW 2 Add Clone User feature 
y // none // SOW 3 Misc: Add Create GRP action to Virtual Group
y // none // SOW 4 Create and consolidate TMS and ASN Admins
y // 18 // SOW 8 Re-design SKU Map
y // 12, 21 // SOW 7 Flag CT feature
y // 12, 21 // SOW 5 Merge Com and EQuery
y // 12, 21 // * SOW 6 Flexible Shipments List
y // none // SOW 9 Add TMS E0 attribute
y // none // SOW 10 Tune Role Admin
y // 10, 18 // SOW 11 New Planner Profile
n // 20 // * SOW 12 Shipments List for a Planner user
? // 20 // * SOW 13 Approval related logic
y // 21 // * SOW 14 Add FTL vs LTL flag and add Truck table for FTL
y // 20 // * SOW 15 ASN transmit
y // 13 // SOW 16 ANA report
y // 20 // SOW 17 Jaguar Misc functionality
y // none // * SOW 18 List of Portals and Portal Profile
n // 10, 18 // * SOW 19 New Shipper Profile 
n // 18, 19 // * SOW 20 New ASN Form
? // 20 // * SOW 21 Shipments List for a Shipper user

NOTE: coding for some tasks can start and even be nearly complete in some cases before set B is completed. But not QA.

[edit] CRWs

These are Change Request Work.

[edit] CRW 1 Introduce View Only Planner

mantis: 3808

spec: see below

BR: Add "view only" planner role.

Currently each planner can be Super and/or Air planner (see planners profile). This is PO Issued By specific.

To achieve that I suggest adding "View Only" options.

If "View Only" is selected then this planner has view only functionality and Super and Air planner options are disabled.

Such planners can only review CTs and post comments. Subject to PO Issued By visibility rules.

[edit] CRW 2 Add Client role to Portal

mantis: 3809

spec: see below

BR:

1) Add ability to configure Client (view only) role users for Portals. 
2) Add "PO Issued By" as a condition to visibility rules.

[edit] CRW 3 Changes to Com component

mantis:

spec: see below

BR:

• 1) To field logic:
  • on Client:
    • default to operator of last change
    • provide choice to email to nobody or anybody from the oper/client lists
  • on Internal:
    • default to "no email"; on submit warning: "Comment will not be e-mailed to anybody(OK, Cancel)"
    • provide choice to email to nobody or anybody from the oper/client lists

• 2) Add Com tab to Edit CT form

[edit] CRW 4 Move Admin > ASN > Admin options to

mantis:

spec: see below

Options found on Admin > ASN > Admin > Shipper portal tab must be Portal specific (will be part of Portal Admin) (not same for all portals):

• Automatically reject shipments on New Tab after X days of inactivity
• Allow Double Approval planners to download Planner's Names (ASN 1.X only)

Dev notes
---------
part A) implement change to admin
part B) implement change to actual logic

[edit] UAT 2

[edit] CRW 5 Enable quick user creation through Portal

mantis:

spec: see below (TBD)

[edit] CRW 6 Re-design interface for Flexible Shipments List

mantis: TBD

spec: see below

"Mouse over header of the list and right click to show column management panel" is fine.

But pop up that manages visible columns and order of columns needs to be re-designed:

• should have 2 panels
• left panel has a list of all available fields in alphabetical order
• right panel contains all visible columns (top to bottom order indicates left to right order on a Sh.List)
• fields/order of fields are to be selected through "drag and drop": drag from left to right and immediately insert on the right in appropriate position
• see mock up below - picture shows two types of mouse drag and drop movements:
  • one is to make column visible and position where user wants to (in the same movement)
  • another is to re-order existing visible columns

Also:

• configuration is user specific and should be remembered for each user
• default config - see below

List of fields / order by default:

• For all tabs:
  • CT#
  • Mode
  • Sub-Mode
  • Pick Up Location
  • Delivery Location
  • PO
  • SKU
  • Qty
  • Piece Price
  • Total Value
  • Item Descr.

• New, Delivered, Archived:
  • Created On
• Approved:
  • Approved On
• Hold:
  • Approved For
• Rejected:
  • Rejected On

Finally, super-set of fields that will be available to choose from:

• <all fields from above list>
• Shipper
• P.O Issued by
• Created by
• Load Number
• PT Number
• DT Number
• Pick up Instructions

• Commodity description

• Cargo Available

• Cargo Due

• Last update date and time

• Pick up Trucker Name

• Est. Pick up date

• Act. Pick up date

• Delivery Trucker Name

• Est. Delivery date

• Act. Delivery date

• Num of Plt

• pkgs on plt

• Loose pkgs

• TTL GW (lb)

• Haz

• Stack

[edit] CRW 7a Change filters logic on Shipment List

mantis: TBD

spec: see below

• No need for "Apply filter" button (only use it for submitting search string) - change in filter should result in immediate re-draw

[edit] CRW 7b Expand / Collapse feature for Shipments List

mantis: TBD

spec: see below

• No need for "Apply filter" button (only use it for submitting search string) - change in filter should result in immediate re-draw
• Add "Display one line per CT" (on/off) functionality for specific CT (not all at once as we have now)
  • see mock up below (implement same or similar in functionality):

And if user clicks on "arrow" - see below

• [IMPORTANT: This is just extra bonus for now, not required!] When "Display one line per CT"=off highlight in one color all commod lines of specific CT. Alternate line highlight as in standard ZK design but not per line but per CT. See example below:

CT#  PO <color>  
123  1  gray
123  2  gray
555  7  white
765  9  gray

[edit] CRW 8 Re-design Truck Info

mantis: 0003816

spec: see below

[edit] part A

We want to request the following info from Shippers when they submit ASN for FTL shipments:

• how many trucks of what size are required to move commodities defined on ASN
• what size, seal, trailer number each truck has
• Typical truck size values: 48 ft, 53 ft. (manage this in Admin)

[edit] part B:

Assign commodities to each truck (as for containers)

Truck Info should be managed similarly to containers:

• lines with truck size / seal# / trailer id
• assign to commod line function
• note: num of trucks should be a drop down
• validation: all fields are optional

MOTs:

• Truck Dom
• Truck Air
• Truck Ocean

ASN 1 vs ASN2:

• on ASN 1 leave as is
• implement only for ASN 2 users (Generic user)

Pick Up Trucker vs Delivery Trucker:

• on ASN it is just one set of values
• value on ASN will populate both Pick Up and Delivery trucker (in some cases there is a pool point then load is transferred from one truck to another)
• on internal present both options (PU and Delivery)

See mock up below: (could be optimized by developer):

NOTE! We should also have container number to the right of checkbox as on container table.

Reports:

• Currently no related reports were requested

[edit] CRW 9 Re-design Container size and type admin

mantis: TBD

spec: see below

Add flag to each item: include or exclude item when this list shows through portal.

(This is to exclude "LCL" value from portal - they use it for internal)

[edit] UAT 3

[edit] CRW 10 New dims and CBM management v 2.0

mantis: TBD

spec: see below

• Leave only per commodity line option
• For option above two sub options as before: Dims and Non-Dims
• Non-Dims option:
  • enter cbm or cft per line as is now
• Dims option:
  • enter multiple lines per commodity item in pop-up (sick on "dims" button), system will calculate total
  • see mock up below
  • in pop-up:
    • by default display one line in the pop up form for all pls (we assume they all of the same size) and one line for loose (assume same - they are of the same size); pre-fill plt count and loose count; see mock up - pop up is for line one
    • user can add/remove lines, etc as is now on similar form we use to enter dims for entire table

Bellow pop up will show if user clicks "Dims" for first line above:

[edit] CRW 11 Planner: Remove option to set shipment status to “NEW” on the New tab

mantis:0003818

spec: see below

On the Planner Shipment List NEW tab – remove the option to set approval status to NEW. Also in detailed view remove the button “set new” for shipments that are already NEW.

[edit] CRW 12 – Add confirmation when sending ASN transmit to external 3PL.

mantis: 0003819

spec: see below

Once an ASN is transmitted to external 3PL, we need to add a note in the HISTORY and COM tab.

[edit] CRW 13 Planner/SuperPlanner ability to change Mode of Transport

mantis: 3826

spec: see below

Planner and SuperPlanner needs the ability to change the Mode of Transport when they approve shipments. This was part of the original functional requirements and is critical for the demo version.

See #Approval with Changing MOT

[edit] CRW 14 Support multiple currencies when entering in Piece Price

mantis:

spec: see below

Shippers need the ability to change the currency when entering Piece Price. This is a critical component of international ASN as we cannot force all shippers to enter in USD.

The shipper should be able to select the currency in the Piece Price field similar to how they can select (Lb or Kg) in Tlt GW field.

The Tlt Value field should then use this new currency – do not allow shipper to adjust currency in Ttl Value field. It should be read-only.

Currencies that need to be supported: USD (US Dollars), EUR (Euro), GBP (Great British Pound)

NOTE 1: If user enters value with USD selected and then changes USD to another currency there will be NO conversion of old value into the new using cur exchange.

NOTE 2: In the future (post Demo Ver) we need to manage list of currencies available / defaults in Portal profile.

[edit] CRW 15 Dims Management - One line case

mantis:

spec: see below

When entering in Dims, if there is 0 Loose pkgs or 0 Plts, then it should default only 1 line item in the Dims table. Right now, the Dims table defaults to 2 lines and assumes that a shipper will send Pallets and Loose packages.

The reasoning behind this is a shipper only ships Pallets, they are usually the same size so they won’t need to enter in multiple dimensions.

However, they will need the ability to add additional dimensions if pallets are different sizes.

Same holds true if they are shipping just loose packages. This change is only to modify the current default lines available to the shipper.

[edit] CRW 16 Dims Management Layout on ASN form

mantis:

spec: see below

Add label “Dimensions Management” to the dims radio buttons on ASN form.

Move the two radio buttons to right side of Commodity Description.

Move Mode/Submode dropdown to level vertically with button of Created By textbox.

Add sentences next to “Non-Dims” and “Dims” radio buttons to describe functionality.

[edit] CRW 17 Total GW should be 2 decimal places

mantis:

spec: see below

Total GW should be 2 decimal places as that is an industry standard.

It currently displays a 3 decimal places.

[edit] CRW 18 ASN Form (layout)

mantis:

spec: see below

Move Ttl HU, Cubic M, Cubic Ft to right side of Ttl Value.

Most shippers do not enter in dimensions until after they’ve entered weight & price, so this is just to conform to their normal day-to-day processes.

[edit] CRW 19 Download to Excel – mimic flexible shipments list

mantis:

spec: see below

They want the Download to Excel feature to mimic flexible shipments list design.

Instead of the current popup where users select fields, they want it to look like the flexible shipments list and they want the “selected” and “not-selected” fields to default to the current state of the user’s shipment list configuration.

[edit] CRW 20 ASN Form – Add UNDEFINED to Mode/Submode dropdown list

mantis:

spec: see below

When a shipper enters in an ASN, rather than leave this dropdown blank to force the Planner/SuperPlanner to assign a MOT – Simon/Marc wants it to be replaced with UNDEFINED and wants it to default to UNDEFINED.

[edit] CRW 21 Hide Meters & Feet from optional units of value in Dims module

mantis:

spec: see below

Marc and Simon were very adamant about hiding this option from the Dims module. Rather than deleting the option, can we think about hiding it in the dropdown for both internal CT2 & ASN2.0?

[edit] CRW 22 Shipments List header should be sizable

mantis:

spec: see below

Column width on Shipments List should be sizable (as on Client App).

See mock up below:

PIN
---
Width for every column will be saved (user specific).

[edit] CRW 23 Re-design Haz feature

mantis:

spec: see below

• add Haz/Non-haz flag to each commodity item

• "CT level Haz/non haz flag" (existing) will not be editable by user anymore - it will be calculated based on the Rule below:

"HNH Rule: If at least one commodity line is Haz then entire shipment is Haz"

• if planner is splitting ASN and forming new CTs then system will analyze each new CT and set CT level haz/non-haz option to haz or non-haz based on the Rule above

• implement above for both ASN 2.0 and Internal

• (!) also, add "Hazardous Note" text field to ASN form (please note that such field already exists in DB and on internal - see "Gen Tab. 23. Hazardous Note")

[edit] CRW 24 Changes to Portal Admin. Transport Mode Tab and related ASN Form validation

mantis:

spec: see below

1) ASN Admin Portal > Transport Modes Tab > item > default option > Transmit To dropdown will have option "none".

In this case Client Company dropdown will be hidden.

This will mean that any other configurations as far as rules are invalid - see also below.

2) On ASN Form, on Save system will validate 4 fields (Shipper, Consignee, Pick Up Location, Delivery To) against equivalent filters defined on Transport Modes Tab. If they do not match error will be produced:

You are not allowed to create ASN with such combination of Shipper, Pick Up Location, Ship To Location values. 
Please change one  or all of these fields and re-submit.

[edit] To do

• case
  • CT created.
  • Approval logic changed.
  • What approval logic to apply? Current logic.

• Change of settings in portal profile will not propagate into existing shipper/planner. Is this OK?

[edit] Misc

https://docs.google.com/spreadsheet/ccc?key=0Am72_c2KUoQjdFc2NTNTcjhyZEFrVVdSSkdFTFVxZXc#gid=9