Zoning

From UG

Revision as of 13:38, 30 April 2010 (edit) Montira (Talk | contribs) (→Figure 2. Assign Location to zone) ← Older edit		Revision as of 13:39, 30 April 2010 (edit) (undo) Montira (Talk | contribs) (→Figure 2. Assign Location to zone) Newer edit →
Line 27:		Line 27:
	=== Figure 2. Assign Location to zone ===		=== Figure 2. Assign Location to zone ===
-	[[]]	+	[[File:AssignZoneAddWOClientCom.JPG]]
	[[File:AssignZoneAdd.JPG]]		[[File:AssignZoneAdd.JPG]]

---

Revision as of 13:39, 30 April 2010

Contents 1 Zoning 1.1 One Client vs many (consolidation) 1.2 Zone size 1.3 Static zone vs dynamic 2 Intro 3 Summary 4 Design 5 Figures 5.1 Figure 1. Create a zone 5.2 Figure 2. Assign Location to zone 5.3 Figure 3. Assign / Edit Zone Pop-up 5.4 Figure 4. View Zone Location

Zoning

One Client vs many (consolidation)

• option 1) One Zone can contain only locations for one client

• option 2) One Zone can contain locations for multiple clients
  • consolidating freight from multiple companies (this would optimize loads using economy of scale)

Zone size

Max radius or max path should be defined. If locations are too spread out they can not be considered in one zone.

Static zone vs dynamic

Assume you have a uniform distribution of pick up locations stretching over a long distance along same road. Then it make sense to consider "dynamic" zones - they would form based on current state of freight located in each location.

Intro

Summary

Design

Figures

Figure 1. Create a zone

Figure 2. Assign Location to zone

Figure 3. Assign / Edit Zone Pop-up

[[]]

Figure 4. View Zone Location