Pool Point

From UG

(Difference between revisions)
Jump to: navigation, search
(→PP conditions)
(→TMS Load Viewer)
 
(143 intermediate revisions not shown)
Line 2: Line 2:
= Info =
= Info =
 +
 +
"Pool Point" is a project. Main goal is to add Pool Point concept to the CT2 system.
 +
 +
First attempt was in 2010. See [[#Ver 1]]. This was never implemented.
 +
 +
Second attempt is current  (2013). See [[#Ver2]].
 +
 +
= Ver 1 =
 +
'''This section was commented out.'''
 +
 +
<!--
Mantis: [http://mantis.jaguarfreight.com/mantis/view.php?id=2597 2597]
Mantis: [http://mantis.jaguarfreight.com/mantis/view.php?id=2597 2597]
 +
'''This has been put on Hold = Status X as MO wants for Descartes to provide this feature.'''
== Business Requirements ==
== Business Requirements ==
Line 16: Line 28:
Currently there is 1 pool point - Jewels Transportation, who are in Newark, NJ.  They collect all of the Tri-State area (NY, NJ, CT) pickups and once the shipments are back in their warehouse, they load empty trailers for the delivery carriers (Lawrence Transportation &/or Albert Farms).
Currently there is 1 pool point - Jewels Transportation, who are in Newark, NJ.  They collect all of the Tri-State area (NY, NJ, CT) pickups and once the shipments are back in their warehouse, they load empty trailers for the delivery carriers (Lawrence Transportation &/or Albert Farms).
-
There are 2 levels on how to decipherer if a shipment should go through a pool point.   
+
There is a multi level process on how the system should check to see if a shipment should route through a pool point.   
-
1st are the origin & destinations:
+
* 1st the system should check CT record against the [[#PP_conditions]]
 +
** If CT record meets the [[#Regular_conditions]], the system should not route through the pool point.
 +
** If record meets the [[#PP_conditions]] the system should route through the pool point.
-
* NY, NJ, CT, going to destination states VA, ME
+
Note: It is possible that CT record meets the [[#PP_conditions]] and the business side does not want to send through the pool point for a few different reasons. 
 +
* One reason could be that the shipment is very urgent.
 +
* Another reason could be that it's not cost effective, as the size of the shipment (number of pallets and gross weight) are high, but fall into the exception category.
-
* TN, GA, NC, SC & VA, going to destination city/state NY, NY (Manhattan, aka NYC)
+
=== Exceptions ===
-
* ME, going to VA (this is a rarer business case, about 20%)
+
The system would check the CT record to see if it meets the '''Exception Criteria''' of the [[#PP_conditions]].
-
2nd are the total number of pallets & total gross weight:
+
If Y, the system should:
-
* Total gross weight is less than 44000 LB
+
* Not send to the TM
 +
* Give some sort of an alert on the [http://mantis.jaguarfreight.com/wiki/Cybertrax_2.1_Client_(requirements)#Truck_Domestic_Stats_TDS_feature TDS]
 +
* Give option to users to route through pool point or not
 +
** Upon users confirmation, send to TM accordingly
-
* Total pallet count (non-stack) is less than 28
+
=== PP conditions ===
-
* Total pallet count (stackable) is less than 60
+
I somewhat defined the conditions under [[#Pool_Point_Criteria]] and have better defined them here.  If a CT record meets the following criteria and is less than the exception criteria below, then the shipment should route the CT through a pool point.
-
It is possible that CT records can meet the above criteria and the business side would not want to send it through the pool point for a few different reasons.  One reason could be that the shipment is very urgent.  Another reason could be that it's not cost effective, as the size of the shipment (number of pallets and gross weight) are high, but less than the criteria - (IE 35,000) and this is what you'd call an exception.  
+
If CT record [[CT_bo#Shipper_State]] = NY, NJ, or CT
 +
*And [[CT_bo#Consignee_State]] = VA OR ME
 +
*And [[Commodity#Plts]] > 60
 +
*And [[Commodity#Stackable]] = Y
 +
*And [[Commodity#Gross_Lb]] is > 44,000 lbs  
-
=== Exceptions ===
+
OR
-
What defines an exception is again the pairing of the same origins and destinations, but the total number of pallets and total gross weight will be lower.
+
If CT record [[CT_bo#Shipper_State]] = TN, GA, NC, SC, or VA
 +
*And [[CT_bo#Consignee_Address]] =  NY, NY (Manhattan, aka NYC)
 +
*And [[Commodity#Plts]] > 60
 +
*And [[Commodity#Stackable]] = Y
 +
*And [[Commodity#Gross_Lb]] is > 44,000
-
*Example:
+
OR
-
** Total gross weight is more than 25000 LB but is less than 44000 LB
+
-
** Total pallet count (non-stack) is more than 20 but less than 28
+
-
** Total pallet count (stackable) is more than 35 but less than 60
+
-
In this case, the system should:
+
If CT record [[CT_bo#Shipper_State]] = NY, NJ, or CT
 +
*And [[CT_bo#Consignee_State]] = VA or ME
 +
*And [[Commodity#Plts]] > 28
 +
*And [[Commodity#Stackable]] = N
 +
*And [[Commodity#Gross_Lb]] is > 44,000
-
* Not send to the TM
+
OR
-
* Give some sort of an alert on the [http://mantis.jaguarfreight.com/wiki/Cybertrax_2.1_Client_(requirements)#Truck_Domestic_Stats_TDS_feature TDS]
+
-
* Give option to users to send through pool point or not
+
-
** Upon users confirmation, send to TM accordingly
+
-
=== PP conditions ===
+
If CT record [[CT_bo#Shipper_State]] = TN, GA, NC, SC, or VA
 +
*And [[CT_bo#Consignee_Address]] = NY, NY (Manhattan, aka NYC)
 +
*And [[Commodity#Plts]] > 28
 +
*And [[Commodity#Stackable]] = N
 +
*And [[Commodity#Gross_Lb]] is > 44,000 lbs
-
I somewhat defined the conditions under [[#Pool_Point_Criteria]].  Where operator will look at ''ALL'' shipments coming from Shipper X, going Destination Y.  are small - IE 1, 2, 8, 10 pallets and weights under
+
'''Exception Criteria''':
-
There are 2 levels on how to decipherer if a shipment should go through a pool point.
+
CT record meets [[#PP_conditions]] but has:
-
1st are the origin & destinations:
+
*[[Commodity#Plts]] > 28 but < 20
-
NY, NJ, CT, going to destination states VA, ME
+
*And [[Commodity#Stackable]] = N
-
TN, GA, NC, SC & VA, going to destination city/state NY, NY (Manhattan, aka NYC)
+
*And [[Commodity#Gross_Lb]] is > 44,000 lbs
-
ME, going to VA (this is a rarer business case, about 20%)
+
-
2nd are the total number of pallets & total gross weight:
+
OR
-
Total gross weight is less than 44000 LB
+
 
-
Total pallet count (non-stack) is less than 28
+
CT record meets [[#PP_conditions]] but has:
-
Total pallet count (stackable) is less than 60
+
*[[Commodity#Plts]] > 60 but < 35
 +
*And [[Commodity#Stackable]] = y
 +
*And [[Commodity#Gross_Lb]] is > 44,000 lbs
=== Regular conditions ===
=== Regular conditions ===
 +
 +
If CT record [[CT_bo#Shipper_State]] = NY, NJ, or CT
 +
*And [[CT_bo#Consignee_State]] = VA OR ME
 +
*And [[Commodity#Plts]] = 60
 +
*And [[Commodity#Stackable]] = Y
 +
*And [[Commodity#Gross_Lb]] = 44,000 lbs 
 +
 +
OR
 +
 +
If CT record [[CT_bo#Shipper_State]] = TN, GA, NC, SC, or VA
 +
*And [[CT_bo#Consignee_Address]] =  NY, NY (Manhattan, aka NYC)
 +
*And [[Commodity#Plts]] = 60
 +
*And [[Commodity#Stackable]] = Y
 +
*And [[Commodity#Gross_Lb]] = 44,000
 +
 +
OR
 +
 +
If CT record, [[CT_bo#Shipper_State]] = NY, NJ, or CT
 +
*And [[CT_bo#Consignee_State]] = VA or ME
 +
And [[Commodity#Plts]] = 28
 +
And [[Commodity#Stackable]] = N
 +
And [[Commodity#Gross_Lb]] = 44,000
 +
 +
OR
 +
 +
If CT record [[CT_bo#Shipper_State]] = TN, GA, NC, SC, or VA
 +
*And [[CT_bo#Consignee_Address]] =  NY, NY (Manhattan, aka NYC)
 +
*And [[Commodity#Plts]] = 28
 +
*And [[Commodity#Stackable]] = N
 +
*And [[Commodity#Gross_Lb]] = 44,000 lbs
 +
 +
 +
== Use Cases ==
 +
 +
=== UC 1 CT Record 5 is shipping from NJ, at 56 stackable plts at 41000 lbs.  ===
 +
 +
This CT's criteria would be an "exception" under the [[#PP_conditions]] and Jag Operator will review if CT needs to go through a PP or not.
 +
 +
=== UC 2 CT Record 2 is shipping from NY, at 3 plts at 325 lbs. ===
 +
 +
This CT's criteria meets the [[#PP_conditions]] and no need for Jag operator to review, it should send automatically to the TM sub CT records 2a & 2b.
 +
 +
=== UC 3 CT Record 9 is shipping from NJ at 15 stackable plts at 11000 lbs ===
 +
 +
This CT's criteria meets the [[#PP_conditions]] in full as it is also less then the exceptions criteria and is sent to the TM as sub CT records 9a & 9b.
 +
 +
Jag operator checks to find that if they were to route this through the PP, it would cost Elizabeth Arden more money than if they were to route by sending a truck load. 
 +
 +
Now jag operator needs to cancel the sub CT records (9a & 9b) that were sent to the TM and has to route the CT record # 9 as if it was sent to the TM under the [[#Regular_conditions]]. 
 +
 +
Descartes advised if/when an operator cancels a shipment # (CT record) in the TM, they cannot send any type of status message back to CT, as they only send message once a shipment (CT record) is apart of a load. 
 +
 +
So in this case, there is no need to use the sub CT records 9a & 9b.  So how these “sub CT records” (the a & b) be handled from our side, as Descartes cannot provide an update message that the shipments were canceled in the TM?
 +
 +
=== UC 4 CT Record 6 is shipping from CT at 1 plt at 125 lbs ===
 +
 +
This CT's criteria meets the [[#PP_conditions]] and is sent to the TM as sub CT records 6a & 6b. 
 +
 +
An hour later, Jag operator receives an e-mail or phone call from Elizabeth Arden who says that this shipment is needed ASAP at their facility. 
 +
 +
Jag operator checks with PP trucker & delivery trucker to see if they can get this picked up today and delivered tomorrow, but pickup trucker cannot pickup today. 
 +
 +
Now jag operator needs to cancel the sub CT records (6a & 6b) that were sent to the TM and has to route the CT record # 6 as if it was sent to the TM under the [[#Regular_conditions]]. 
 +
 +
Descartes advised if/when an operator cancels a shipment # (CT record) in the TM, they cannot send any type of status message back to CT, as they only send message once a shipment (CT record) is apart of a load. 
 +
 +
So in this case, there is no need to use the sub CT records 9a & 9b.  So how these “sub CT records” (the a & b) be handled from our side, as Descartes cannot provide an update message that the shipments were canceled in the TM?
== Design Ideas ==
== Design Ideas ==
-
To have the system check every approved CT record to see if meets the [[#Pool Point Criteria]] before sending them to the TM.   
+
Have the system check every approved CT record to see if meets the [[#Pool Point Criteria]] before sending them to the TM.   
 +
 
 +
* If record meets the #Pool Point Criteria:
 +
** the system create 2 sub records of the same CT record in the background.
 +
*** One from the pickup location to the pool point.
 +
*** Another from the pool point to the deliver to location.
 +
** Then send the 2 background records to the TM for Jag operators to create loads and tender to carriers.
 +
 
 +
* When TMS load plans are received & status messages, the system would update the original CT # 121245 only as the 2 are sub records in the background.
 +
 
 +
IE: CT 121245 has 8 pallets at 1500 lbs, coming from Edison, NJ and is going to Roanoke, VA.  The system would creates CT # 121245a at 8 pallets at 1500 lbs, coming from Edison, NJ going to the pool point, Jewels Transportation in Newark, NJ and send to the TMS.  At that same time, the system would create CT # 121245b at 8 pallets at 1500 lbs, coming from the pool point Jewels Transportation in Newark, NJ, going to the deliver to location in Roanoke, VA and send to the TMS.
-
* If record meets the criteria: have the system would then create 2 copies of that 1 record in the background - 1 from the pickup location to the pool point and 1 from the pool point to the deliver to location.
+
* Need some sort of a way to "override the systems pool point decision" in the case of business needs.
-
** IE CT 121245 has 8 pallets at 1500 lbs, coming from Edison, NJ - going to Roanoke, VA.  The system creates 1 CT # 121245a at 8 pallets at 1500 lbs, coming from Edison, NJ - going to the Jewels Transportation in Newark, NJ (they are the pool point).  Then the system creates the second CT # 121245b at 8 pallets at 1500 lbs, coming from the pool point - Jewels Transportation in Newark, NJ, going to the deliver to location in Roanoke, VA.  Then send these 2 records 121245a & 121245b to the TM, for the Jag ops to work with.  Upon carriers tender acceptance in the TM & their updating of the pickup/delivery dates, the system would update the original CT # 121245 only, as received on the status update from the TM, because both a & b records are in the background.
+
== SA Notes ==
== SA Notes ==
Line 142: Line 248:
In general it would be some kind of schedule regulating when to move CTs accumulated at PP and route various destinations.
In general it would be some kind of schedule regulating when to move CTs accumulated at PP and route various destinations.
-
In case of "current Arden project Jewels pool point" it happens once a day at 4pm.
+
In case of "Jewels pool point" it happens once a day at 4pm.
This should not be captured in the system.
This should not be captured in the system.
Line 149: Line 255:
Post every such CT on special dashboard
Post every such CT on special dashboard
-
Several times a day before Pool Time operators will examine CTs posted to dashboard and direct system to use [[#Regular algorithm]] or [[#PP algorithm]]
+
Several times a day before Pool Time operators will examine CTs posted to dashboard. Per CT or group of CTs they will make decision and direct system to use [[#Regular algorithm]] or [[#PP algorithm]]
-
=== pick ups ===
+
=== Pick ups ===
-
As system d
+
TBD
-
 
+
-
=== Figure: PP ===
+
-
[[File:Pool point.jpg]]
+
== RFP ==
== RFP ==
-
Proposal required before coding.
+
Proposal required before coding.  
 +
 
 +
Marc has asked Descartes to correct the TM according to our (and other customers) business needs and to put the CT2 PP concept on hold.  --[[User:Denise|Denise]] 12:01, 9 December 2010 (EST)
 +
 
 +
-
 +
-->
 +
 
 +
= Ver 2 =
 +
 
 +
Parent mantis: '''4168'''
 +
 
 +
== Definitions ==
 +
 
 +
=== Client Company ===
 +
 
 +
Company that contacted Jaguar to ask to assist in shipping some goods.
 +
 
 +
It will be billed by Jaguar.
 +
 
 +
=== CT ===
 +
 
 +
In CT2 system it is a certain amount of goods (aka commodities) combined together and associated with one shipment order made by a [[#Client Company]].
 +
 
 +
It has a unique id# called CT# and properties such as weight, volume, Origin, Destination, etc.
 +
 
 +
Properties of commodities are defined in Commodity Table associated with CT. They are defined on one hand by packaging (pallets, loose count, etc) and on another hand by PO, SKU, Quantities.
 +
 
 +
=== MOT ===
 +
 
 +
MOT - Mode Of Transport.
 +
 
 +
In CT2 system it is a property of CT that classify it by several main categories.
 +
 
 +
For example:
 +
 
 +
* MOT= Air if it is a multimodal move "truck -> Air -> truck"
 +
 
 +
* MOT=Truck Air if it is an LDP Air move
 +
 
 +
=== CT Group ===
 +
 
 +
In CT2 system it is a number of CTs associated together. It is assigned a unique number (GRP#).
 +
 
 +
All CTs in the same group have same [[#MOT]].
 +
 
 +
=== Shipment ===
 +
 
 +
See [[Sh#Shipment]]
 +
 
 +
=== Vehicle ===
 +
 
 +
It is a mobile machine that transports  [[#CT]]s such as trucks, trains, ships, boats and aircraft.
 +
 
 +
=== Carrier ===
 +
 
 +
Company that operates [[#Vehicle]].
 +
 
 +
=== Location ===
 +
 
 +
Location is a recorded in a CT2 system geographical position of [[#CT]].
 +
 
 +
Not all locations are recorded in the system.
 +
 
 +
==== Location attributes ====
 +
 
 +
* Address
 +
* Date of arrival of CT to this location
 +
* Date of departure from this location
 +
 
 +
==== Location type ====
 +
 
 +
There are 3 types of locations:
 +
 
 +
* [[#Origin Door]] (required)
 +
* [[#Stop]] (some type of stops are required for some [[#MOT]])
 +
* [[#Destination Door]] (required)
 +
 
 +
==== Origin Door ====
 +
 
 +
aka Pick Up Location
 +
 
 +
Location where CT is originally picked up.
 +
 
 +
Mapped to 5. Export Pick-up (T4)
 +
 
 +
==== Destination Door ====
 +
 
 +
aka Delivery Location
 +
 
 +
Location that is a final delivery destination for CT.
 +
 
 +
Mapped to 6. Export Delivery To (T5)
 +
 
 +
==== Stop ====
 +
 
 +
For given CT '''Stop''' is a temporary location to which [[#Carrier]] delivers it.
 +
 
 +
Later same carrier or another carrier picks CT up from there to move to another Stop or Destination Door.
 +
 
 +
Not all stops need to be recorded in the system. But some of them are mandatory (example: Port of Origin).
 +
 
 +
One special type of stop is a [[#Pool Point]].
 +
 
 +
===== Pool Point =====
 +
 
 +
Pool Point is a special [[#Stop]] that is used for transferring and consolidation of CTs.
 +
 
 +
See example below.
 +
 
 +
[[File:Pool point.jpg| 500px]]
 +
 
 +
===== Other important stops =====
 +
 
 +
* Air:
 +
** Origin Airport
 +
** Destination Airport
 +
** Transshipment Airport
 +
 
 +
* Ocean:
 +
** Origin Port
 +
** Destination Port
 +
 
 +
* Misc:
 +
** Terminal
 +
** Warehouse
 +
 
 +
=== Leg ===
 +
 
 +
For given CT '''Leg''' is a one non-stop trip between Stops or between Origin Door and Stop or between Stop and Destination Door. It is done on the same [[#Vehicle]] with the same [[#Carrier]].
 +
 
 +
Leg as entity has the following attributes:
 +
 
 +
* Origin
 +
* Destination
 +
* transport mode (air vs LTL vs ... ), this is different from [[#MOT]] !
 +
* Carrier
 +
* Vehicle id (such as trailer id for MOT= Truck Dom)
 +
 
 +
=== Path ===
 +
 
 +
Full ordered sequence of [[#Leg]]s that CT has.
 +
 
 +
Path could be:
 +
 
 +
* [[#Non Stop Path]]
 +
* [[#Muli Stop Path]]
 +
 
 +
=== Non Stop Path ===
 +
 
 +
CT is moving '''Non stop''' if it moves from [[#Origin Door]] to [[#Destination Door]] with one [[#Carrier]] without a [[#Stop]].
 +
 
 +
In this case trip has one [[#Leg]].
 +
 
 +
=== Multi Stop Path ===
 +
 
 +
In this case CT has at least one [[#Stop]].
 +
 
 +
In some cases stops result in change of a carrier.
 +
 
 +
Such trips have more than one leg:
 +
 
 +
"Pick Up Location -> Stop1 -> Stop2 -> ... Stop N -> ... -> Delivery Location"
 +
 
 +
== Ver 2 Business Needs ==
 +
 
 +
* add a concept of [[#Pool Point]] to CT2
 +
** store them in the system with associated address and name
 +
 
 +
* when load info is passed from TMS to CT2:
 +
** identify if this CT travels through [[#Pool Point]]
 +
** tag CT as "delivered" / send "delivered" message to client users only if delivered to Delivery Location (not a Pool Point)
 +
 
 +
Above is possible due to recent fixes in TMS.
 +
 
 +
Above will eliminate workarounds operators have used so far to accommodate Pool Point moves.
 +
 
 +
== Ver 2 Systems Analysis and Solution ==
 +
 
 +
=== Impact on ER Model ===
 +
 
 +
Decision is made to Implement [[#Multi Stop Path]].
 +
 
 +
Now Truck - Domestic CT could be only part of one or two loads.
 +
 
 +
In case of two loads we are able to accomodate "Pick Up Trucker" (to Pool Point) and "Delivery Trucker" (from Pool Point) info:
 +
 
 +
* carrier name
 +
* trailer id
 +
 
 +
It was suggested to increment ER structure to be able to collect info about [[#Multi Stop Path]] / multi leg trips.
 +
 
 +
For just 2 leg trips such as "Pick Up -> Pool Point/Stop -> Delivery" we could have created a simpler solution. But this would limit us in the future.
 +
 
 +
Note that this will be used across all MOTs in the future.
 +
 
 +
=== Impact on CT Editor ===
 +
 
 +
'''Idea''':
 +
 
 +
* Re-factor table on Dates tab to include all relevant info
 +
* This table will be somewhat different for these 3 cases below.
 +
 
 +
==== CT Editor in case of Descartes TMS Dom Trucking ====
 +
 
 +
* '''! only this case to be implemented in this release !'''
 +
 
 +
* This is for our particular implementation of Descartes TMS
 +
 
 +
* Add "Dates/Locations" tab. On this tab display info defined below in a table like form
 +
 
 +
* '''Row''' in this table represents [[#Location]] with associated info for it and for each [[#Leg]]  that initiates in that Location. Exception is the last row that represents only "final" Location (destination door)
 +
 
 +
* '''Columns''':
 +
** Location // [[#Location type]] - see below
 +
** Address // Location address
 +
** Status // If associated "Actual date" is defined then CT has reached (and possibly passed) this point and status is "actual". Else it is "estimated"
 +
** Arrived // editable // date of arrival to this Location; use Actual date if defined, else use estimated
 +
** Departed // editable // date of departure from this Location; use Actual date if defined, else use estimated
 +
** Transp Mode // comes from TMS
 +
** Carrier // editable // trucker name, comes from TMS
 +
** Vehicle id // editable // trailer id, comes from TMS
 +
** Load# // comes from TMS
 +
** Pro number // editable // comes from TMS
 +
 
 +
* Mock up:
 +
 
 +
[[File:Pp truck dom with full addr.png | 700px]]
 +
 
 +
==== CT Editor in case of non TMS Dom Trucking ====
 +
 
 +
Same as above but:
 +
 
 +
* operator adds rows in the table identifying Location types and associated info
 +
* additional location types such as Warehouse and Stop
 +
 
 +
==== CT Editor in case of non Dom Trucking ====
 +
 
 +
* operator adds rows in the table identifying Location types and associated info
 +
* more types of locations and legs that are associated with different MOTs such as Air and ocean (Examples: Ports/Airports, Terminals, etc)
 +
 
 +
==== CT Editor Open Questions ====
 +
 
 +
* Should we also edit through this table?
 +
 
 +
* Should we only edit through this table? (removing say Pick Up/Deliv Trucker from Gen Tab)
 +
 
 +
* In non-TMS case and other MOTs case this table is created by oper:
 +
** adding locations/identifying what type of location
 +
** need some validations such as delivery location must always be last, etc
 +
 
 +
=== Impact on Reports ===
 +
 
 +
Interface will not change.
 +
 
 +
Known reports affected:
 +
 
 +
* Main
 +
* DR/KPIs
 +
 
 +
=== Impact on DRs ===
 +
 
 +
TBD
 +
 
 +
=== Impact on pdfs ===
 +
 
 +
None.
 +
 
 +
=== Impact on Accounting ===
 +
 
 +
TBD
 +
 
 +
=== Impact on EDI interface ===
 +
 
 +
Change code to capture moves through Pool Point.
 +
 
 +
Use '''AddressTypeDesc'''="Pool Point" attribute/value pair of '''ShipToInformation'''.
 +
 
 +
Update DB:
 +
* load numbers
 +
* carriers
 +
* dates
 +
 
 +
Above comes from:
 +
* load plans
 +
* status messages
 +
 
 +
Consider most generic test case: "Consolidate with Pooling"number of CTs from different pick up locations to different delivery locations.
 +
 
 +
Update above should update both Gen Tab and Locations Tab.
 +
 
 +
==== Pool Point Address ====
 +
 
 +
Add Pool Point Addresses to Addressbook > Transportation under new category "T14: Pool Points"
 +
 
 +
When Pool Point info comes from TMS compare with above by full address or by id.
 +
 
 +
=== Impact on Notifications ===
 +
 
 +
Edit current notifications on:
 +
* actual pick up updates from trucker
 +
* actual delivery updates from trucker
 +
 
 +
Notify users only if:
 +
* picked up from Origin Door
 +
* delivered to Final Delivery Location (Destination Door).
 +
 
 +
Do not notify when delivered to Pool Point or any other intermediate stop.
 +
 
 +
=== Impact on Est Module ===
 +
 
 +
For every new load two lines will be added into Est Table (for freight and other charges).
 +
 
 +
So in case CT has path: Origin > Pool Point > Destination we should have 4 lines on Est Tab (two per load).
 +
 
 +
=== TMS Load Viewer ===
 +
 
 +
==== View Loads Through Quicklink ====
 +
 
 +
Roma/Alex suggest simple TMS Load Viewer.
 +
 
 +
By entering LD# into quick link user is served page with the following info:
 +
 
 +
* ld#
 +
* Carrier
 +
* List of CT# under this load
 +
 
 +
==== View Loads Through Where Is ====
 +
 
 +
* Add one more filter to Where Is Report:
 +
** label: "TMS LD# equals"
 +
** control: enter into "text box" to create a list
 +
** logic: for LD#(s) that user enters find all CTs that are associated with entered numbers and produce standard report for these CTs
 +
** if there are multiple loads that participate in the report result then in els view add column "LD#"
 +
 
 +
==== View Loads in Load Window ====
 +
 
 +
* Add "Load Window" in an ASN Portal so that could be opened from "ASN View" window.
 +
* In Internal ''(please note, Leg means a Load)'':
 +
** Show a Load#-related info clicking a "View" button (or use Load# as a link to open pop-up window).
 +
** Clicking on GRP# (link) -> see a GRP in pop-up window.
 +
* Provide an ability to print for both above (Load/GRP).
 +
 
 +
* Load Window mockup:
 +
[[File:Load-Window-mockup.png]]
 +
 
 +
=== Impact on Logs ===
 +
 
 +
Make sure that all events are properly logged.
 +
 
 +
= SOWs =
 +
 
 +
=== SOW 1 Create architecture for Pool Point project ===
 +
 
 +
mantis: 0004228
 +
 
 +
spec: see [[#Ver 2]]
 +
 
 +
 
 +
=== SOW 2 ===
 +
 
 +
==== Impact on EDI interface ====
 +
 
 +
mantis: 0004229
 +
 
 +
spec: see [[#Impact on EDI interface]]
 +
 
 +
 
 +
=== SOW 3 ===
 +
 
 +
==== Impact on CT Editor ====
 +
 
 +
mantis: 0004236
 +
 
 +
spec: see [[#CT Editor in case of Descartes TMS Dom Trucking]]
 +
 
 +
 
 +
=== SOW 4 ===
 +
 
 +
==== TMS Load Viewer ====
 +
 
 +
mantis:  4237
 +
 
 +
spec:
 +
* part 1: see [[#View Loads Through Where Is]] ''(released in 2013, see mantis)''
 +
* part 2: see [[#View Loads in Load Window]]
 +
 
 +
=== SOW 5 ===
 +
 
 +
==== Logging for TMS ====
 +
 
 +
mantis:  4238
 +
 
 +
spec: see [[#Impact on Logs]]
 +
 
 +
 
 +
=== SOW 6 ===
 +
 
 +
==== Impact on Notifications ====
 +
 
 +
mantis:  4240
 +
 
 +
spec:
 +
 
 +
[[#Impact on Notifications]]
 +
 
 +
 
 +
=== SOW 7 ===
 +
 
 +
==== Impact on Est Module ====
 +
 
 +
mantis:    4241
 +
 
 +
spec:
 +
[[#Impact on Est Module]]
 +
 
 +
 
 +
=== Misc ===
 +
 
 +
1) old field (Gen Tab) // new field (Leg Tab) // updated by // TMS specific?
 +
 
 +
* 5. Export Pick-up (T4) // PU, leg1 // oper // N
 +
 
 +
* 6. Export Delivery To (T5) // Delivery, leg 2 // oper // N
 +
 
 +
* 8. Export Pick-up Trucker (V3) //  // N
 +
 
 +
* Delivery Trucker (V3) //  // N
 +
 
 +
2) old field (Gen Tab) // new field (Leg Tab) // updated by

Current revision as of 14:13, 30 March 2015


Contents

[edit] Info

"Pool Point" is a project. Main goal is to add Pool Point concept to the CT2 system.

First attempt was in 2010. See #Ver 1. This was never implemented.

Second attempt is current (2013). See #Ver2.

[edit] Ver 1

This section was commented out.


[edit] Ver 2

Parent mantis: 4168

[edit] Definitions

[edit] Client Company

Company that contacted Jaguar to ask to assist in shipping some goods.

It will be billed by Jaguar.

[edit] CT

In CT2 system it is a certain amount of goods (aka commodities) combined together and associated with one shipment order made by a #Client Company.

It has a unique id# called CT# and properties such as weight, volume, Origin, Destination, etc.

Properties of commodities are defined in Commodity Table associated with CT. They are defined on one hand by packaging (pallets, loose count, etc) and on another hand by PO, SKU, Quantities.

[edit] MOT

MOT - Mode Of Transport.

In CT2 system it is a property of CT that classify it by several main categories.

For example:

  • MOT= Air if it is a multimodal move "truck -> Air -> truck"
  • MOT=Truck Air if it is an LDP Air move

[edit] CT Group

In CT2 system it is a number of CTs associated together. It is assigned a unique number (GRP#).

All CTs in the same group have same #MOT.

[edit] Shipment

See Sh#Shipment

[edit] Vehicle

It is a mobile machine that transports #CTs such as trucks, trains, ships, boats and aircraft.

[edit] Carrier

Company that operates #Vehicle.

[edit] Location

Location is a recorded in a CT2 system geographical position of #CT.

Not all locations are recorded in the system.

[edit] Location attributes

  • Address
  • Date of arrival of CT to this location
  • Date of departure from this location

[edit] Location type

There are 3 types of locations:

[edit] Origin Door

aka Pick Up Location

Location where CT is originally picked up.

Mapped to 5. Export Pick-up (T4)

[edit] Destination Door

aka Delivery Location

Location that is a final delivery destination for CT.

Mapped to 6. Export Delivery To (T5)

[edit] Stop

For given CT Stop is a temporary location to which #Carrier delivers it.

Later same carrier or another carrier picks CT up from there to move to another Stop or Destination Door.

Not all stops need to be recorded in the system. But some of them are mandatory (example: Port of Origin).

One special type of stop is a #Pool Point.

[edit] Pool Point

Pool Point is a special #Stop that is used for transferring and consolidation of CTs.

See example below.

[edit] Other important stops
  • Air:
    • Origin Airport
    • Destination Airport
    • Transshipment Airport
  • Ocean:
    • Origin Port
    • Destination Port
  • Misc:
    • Terminal
    • Warehouse

[edit] Leg

For given CT Leg is a one non-stop trip between Stops or between Origin Door and Stop or between Stop and Destination Door. It is done on the same #Vehicle with the same #Carrier.

Leg as entity has the following attributes:

  • Origin
  • Destination
  • transport mode (air vs LTL vs ... ), this is different from #MOT !
  • Carrier
  • Vehicle id (such as trailer id for MOT= Truck Dom)

[edit] Path

Full ordered sequence of #Legs that CT has.

Path could be:

[edit] Non Stop Path

CT is moving Non stop if it moves from #Origin Door to #Destination Door with one #Carrier without a #Stop.

In this case trip has one #Leg.

[edit] Multi Stop Path

In this case CT has at least one #Stop.

In some cases stops result in change of a carrier.

Such trips have more than one leg: 

"Pick Up Location -> Stop1 -> Stop2 -> ... Stop N -> ... -> Delivery Location"

[edit] Ver 2 Business Needs

  • add a concept of #Pool Point to CT2
    • store them in the system with associated address and name
  • when load info is passed from TMS to CT2:
    • identify if this CT travels through #Pool Point
    • tag CT as "delivered" / send "delivered" message to client users only if delivered to Delivery Location (not a Pool Point)

Above is possible due to recent fixes in TMS.

Above will eliminate workarounds operators have used so far to accommodate Pool Point moves.

[edit] Ver 2 Systems Analysis and Solution

[edit] Impact on ER Model

Decision is made to Implement #Multi Stop Path.

Now Truck - Domestic CT could be only part of one or two loads.

In case of two loads we are able to accomodate "Pick Up Trucker" (to Pool Point) and "Delivery Trucker" (from Pool Point) info:

  • carrier name
  • trailer id

It was suggested to increment ER structure to be able to collect info about #Multi Stop Path / multi leg trips.

For just 2 leg trips such as "Pick Up -> Pool Point/Stop -> Delivery" we could have created a simpler solution. But this would limit us in the future.

Note that this will be used across all MOTs in the future.

[edit] Impact on CT Editor

Idea:

  • Re-factor table on Dates tab to include all relevant info
  • This table will be somewhat different for these 3 cases below.

[edit] CT Editor in case of Descartes TMS Dom Trucking

  • ! only this case to be implemented in this release !
  • This is for our particular implementation of Descartes TMS
  • Add "Dates/Locations" tab. On this tab display info defined below in a table like form
  • Row in this table represents #Location with associated info for it and for each #Leg that initiates in that Location. Exception is the last row that represents only "final" Location (destination door)
  • Columns:
    • Location // #Location type - see below
    • Address // Location address
    • Status // If associated "Actual date" is defined then CT has reached (and possibly passed) this point and status is "actual". Else it is "estimated"
    • Arrived // editable // date of arrival to this Location; use Actual date if defined, else use estimated
    • Departed // editable // date of departure from this Location; use Actual date if defined, else use estimated
    • Transp Mode // comes from TMS
    • Carrier // editable // trucker name, comes from TMS
    • Vehicle id // editable // trailer id, comes from TMS
    • Load# // comes from TMS
    • Pro number // editable // comes from TMS
  • Mock up:

[edit] CT Editor in case of non TMS Dom Trucking

Same as above but:

  • operator adds rows in the table identifying Location types and associated info
  • additional location types such as Warehouse and Stop

[edit] CT Editor in case of non Dom Trucking

  • operator adds rows in the table identifying Location types and associated info
  • more types of locations and legs that are associated with different MOTs such as Air and ocean (Examples: Ports/Airports, Terminals, etc)

[edit] CT Editor Open Questions

  • Should we also edit through this table?
  • Should we only edit through this table? (removing say Pick Up/Deliv Trucker from Gen Tab)
  • In non-TMS case and other MOTs case this table is created by oper:
    • adding locations/identifying what type of location
    • need some validations such as delivery location must always be last, etc

[edit] Impact on Reports

Interface will not change.

Known reports affected:

  • Main
  • DR/KPIs

[edit] Impact on DRs

TBD

[edit] Impact on pdfs

None.

[edit] Impact on Accounting

TBD

[edit] Impact on EDI interface

Change code to capture moves through Pool Point.

Use AddressTypeDesc="Pool Point" attribute/value pair of ShipToInformation.

Update DB:

  • load numbers
  • carriers
  • dates

Above comes from:

  • load plans
  • status messages

Consider most generic test case: "Consolidate with Pooling"number of CTs from different pick up locations to different delivery locations.

Update above should update both Gen Tab and Locations Tab.

[edit] Pool Point Address

Add Pool Point Addresses to Addressbook > Transportation under new category "T14: Pool Points"

When Pool Point info comes from TMS compare with above by full address or by id.

[edit] Impact on Notifications

Edit current notifications on:

  • actual pick up updates from trucker
  • actual delivery updates from trucker

Notify users only if:

  • picked up from Origin Door
  • delivered to Final Delivery Location (Destination Door).

Do not notify when delivered to Pool Point or any other intermediate stop.

[edit] Impact on Est Module

For every new load two lines will be added into Est Table (for freight and other charges).

So in case CT has path: Origin > Pool Point > Destination we should have 4 lines on Est Tab (two per load).

[edit] TMS Load Viewer

[edit] View Loads Through Quicklink

Roma/Alex suggest simple TMS Load Viewer.

By entering LD# into quick link user is served page with the following info:

  • ld#
  • Carrier
  • List of CT# under this load

[edit] View Loads Through Where Is

  • Add one more filter to Where Is Report:
    • label: "TMS LD# equals"
    • control: enter into "text box" to create a list
    • logic: for LD#(s) that user enters find all CTs that are associated with entered numbers and produce standard report for these CTs
    • if there are multiple loads that participate in the report result then in els view add column "LD#"

[edit] View Loads in Load Window

  • Add "Load Window" in an ASN Portal so that could be opened from "ASN View" window.
  • In Internal (please note, Leg means a Load):
    • Show a Load#-related info clicking a "View" button (or use Load# as a link to open pop-up window).
    • Clicking on GRP# (link) -> see a GRP in pop-up window.
  • Provide an ability to print for both above (Load/GRP).
  • Load Window mockup:

File:Load-Window-mockup.png

[edit] Impact on Logs

Make sure that all events are properly logged.

[edit] SOWs

[edit] SOW 1 Create architecture for Pool Point project

mantis: 0004228

spec: see #Ver 2


[edit] SOW 2

[edit] Impact on EDI interface

mantis: 0004229

spec: see #Impact on EDI interface


[edit] SOW 3

[edit] Impact on CT Editor

mantis: 0004236

spec: see #CT Editor in case of Descartes TMS Dom Trucking


[edit] SOW 4

[edit] TMS Load Viewer

mantis: 4237

spec:

[edit] SOW 5

[edit] Logging for TMS

mantis: 4238

spec: see #Impact on Logs


[edit] SOW 6

[edit] Impact on Notifications

mantis: 4240

spec:

#Impact on Notifications


[edit] SOW 7

[edit] Impact on Est Module

mantis: 4241

spec: #Impact on Est Module


[edit] Misc

1) old field (Gen Tab) // new field (Leg Tab) // updated by // TMS specific?

  • 5. Export Pick-up (T4) // PU, leg1 // oper // N
  • 6. Export Delivery To (T5) // Delivery, leg 2 // oper // N
  • 8. Export Pick-up Trucker (V3) // // N
  • Delivery Trucker (V3) // // N

2) old field (Gen Tab) // new field (Leg Tab) // updated by

Retrieved from "https://wiki.jaguarfreight.com/Pool_Point"
Personal tools