Use Cases for EDI to TMS

From UG

(Difference between revisions)
Jump to: navigation, search
(→Use case 1. Jaguar Discovers Approved CTs)
(→About)
 
(114 intermediate revisions not shown)
Line 1: Line 1:
[[Category:EDI to TMS]]
[[Category:EDI to TMS]]
 +
 +
== About ==
 +
<font color="red" size="6"> This article was used as an idea on how the Arden domestic team would use the TM.  It is not relevant to the current business process as it was newly defined. </font>
 +
 +
== Examples ==
 +
 +
=== One CT from A to B ===
 +
 +
* import/create 1 CT
 +
* move CT from A to B on one truck  (manually) (One Load?)
 +
* Assign trucker (manually)
 +
* Assign pickup/delivery dates (manually?)
 +
 +
=== Two CTs from A to B ===
 +
 +
* import/create 2 CT
 +
* move both CTs from A to B on one truck  (manually) (One Load?)
 +
* Assign trucker (manually)
 +
* Assign pickup/delivery dates (manually?)
 +
 +
=== Combining 2 shipments Miami to Boston and Atlanta to NY into one load ===
 +
 +
* CT1:
 +
** from: Miami, FL
 +
** to: Boston, MA
 +
 +
* CT2:
 +
** from: Atlanta, GA
 +
** to: New York, NY
 +
 +
==== Shipment Import XML ====
 +
TBD
 +
 +
==== Optimal route ====
 +
 +
* Track A:
 +
** Start: Pick up CT1 in Miami
 +
** Stop#1: Pick up CT2 in Atlanta
 +
** Stop#2: Drop off CT2 in New York
 +
** Finish: Drop off CT1 in Boston
 +
 +
===== Load Plan XML for Optimal=====
 +
TBD
 +
 +
==== Non Optimal route ====
 +
 +
* Track A:
 +
** Start: Pick up CT1 in Miami
 +
** Finish: Drop off CT1 in Boston
 +
 +
* Track B:
 +
** Start: Pick up CT2 in Atlanta
 +
** Finish: Drop off CT2 in New York
 +
 +
===== Load Plan XML for Non Optimal =====
 +
TBD
 +
 +
==== TMS use options ====
 +
 +
* operator creates [[#Optimal route]] manually
 +
** discovering shipments to combine
 +
** discovering optimal route
 +
** discovering optimal cost carrier
 +
 +
* operator creates [[#Non Optimal route]] manually
 +
 +
* operator runs optimization and system suggests [[#Optimal route]]
 +
 +
=== Link to User Guide ===
 +
 +
Similar example - see Pic on page 153 in Descartes TMS User guide.
== Business story ==
== Business story ==
-
''' July 22, 10:30am'''
+
''' July 22'''
-
Shipper, Mary with Jackel creates 1 new CT record shipping from her NJ warehouse and at the same so does shipper Harry with Rexam shipping from his NJ warehouse.
+
 
 +
''Shipper Mary with Jackel creates 1 new CT record (# 11111) shipping from her NJ warehouse, Gannet Warehouse at 58 Executive Drive in Edison, NJ.  She only has 1 pallet ready and would like to get this off of her warehouse dock so her warehouse can continue with their monthly inventory stock report.  Now at the same shipper Harry with Princeton Label creates 1 new CT record (# 11145) shipping from his NJ warehouse, Princeton Labels & Packaging Inc at 1226 Route 130 in Robbinsville, NJ. He has about 15 pallets that are ready to ship today and hopes that CEI Roanoke will approve this PO/SKU to ship.''
 +
 
 +
'''...later that day...'''
 +
 
 +
''Shipper Orlando with Pochet creates 1 new CT record (# 11200) shipping from his NJ warehouse, Vecco Holdings at 6801 West Side Avenue in North Bergen and he also has only 1 pallet that is ready to ship'''
 +
 
 +
'''...even later that day...'''
 +
 
 +
''At once, 2 separate Arden planners approve these 3 CT records (# 11111, 11145 & 11200) and now Jag operator Susan notices that her TDS dashboard has 3 approved shipments.  So she logs into TMS and finds those same 3 records on her new shipment list.  Its now 3:45 in the afternoon and as Susan reviews each of the shipments, she notices they are all shipping from NJ and arranges in TMS to build a load with the optimization process.  After her load is built, she tenders the load to Jewels Transportation and awaits their replies.''
 +
 
 +
'''...shortly before quitting time...'''
 +
 
 +
''Jewels accepts the tender, confirms they'll arrange to collect all 3 shipments at 17 pallets total the next day.  Now all 3 CT2 records are updated with the pickup truckers name, as well as the estimated pickup date.  As well, all 3 shippers, including EA Dom receive an e-mail notification from cybertrax@jaguarfreight.com that their records were approved and Jewels Transportation will pickup.''
 +
 
 +
'''Late afternoon July 23'''
 +
 
 +
''Jewels collects all 3 shipments and updates their system.  Trucker unloads these shipments at his warehouse and places the 1 shipment to the side for a different carrier to arrange the delivery and updates their system that all were collected and on hand.  Once they update their system, that information is sent to TMS, then TMS sends the information to Jaguar and automatically updates the CT records with the actual pickup date.''
 +
 
 +
'''...early evening'''
 +
 
 +
''Delivery trucker, Lawrence Trucking goes in to pick up the 1 shipment for CEI Roanoke.  He signs a confirmation receipt (which is like a POD) of what he is picking up and gives a copy to Jewels.  They update their system that this 1 shipment was transferred to the delivery trucker accordingly and their system sends that information to TMS, then TMS sends the information back to Jaguar and automatically updates the CT record with the delivery truckers name, including the estimated & actual delivery dates.  Now Jewels takes the signed confirmation receipt, writes the CT# reference on it (as the CT# must match the CT# that was created by shipper user) and faxes/e-mails the POD to Jaguar Freight.''
 +
 
 +
'''...shortly after Lawrence leaves Jewels dock'''
 +
 
 +
''Jewels warehouse manager is arranging for his truckers morning deliveries.  He loads his driver with several different shipments delivering to the local NJ area which includes these 2 shipments that are delivering to CEI Holmdel.  He updates his system that these 2 shipments will be delivering tomorrow Jul 24 and that information sends to TMS.  Then TMS sends the information back to Jaguar and automatically updates the CT record with the delivery truckers name, including the estimated date.''
 +
 
 +
'''the next morning July 24...'''
 +
 
 +
''Jag operator Susan receives the Lawrence POD from Jewels and up loads the POD into the CT record.  She also checks to see that Jewels has arranged for the 2 shipments to CEI Holmdel for delivery today.''
 +
 
 +
'''...right before lunch'''
-
This needs to reflect typical and some exceptional workflows
+
''Jewels dispatcher hears from his local NJ driver who advises he just got a flat tire...He advises him that it's going to take some time before he can get it fixed and is unsure if he can arrange his last drop...His last drop or delivery is for CEI Holmdel.  Now Jewels Dispatcher calls Jaguar to notify them of the same and Jaguar advises Debbie at CEI Holmdel that her delivery will be late''
-
* 3 CTs get approved
+
'''4:35 pm...'''
-
* CT2 sends data to TMS
+
-
* Jag oper discovers new approved CTs (how?)
+
-
* a) Jag oper manually processes CT
+
-
* updates
+
-
* docs
+
-
* etc
+
-
* b) Jag oper uses optimization to handle CT
+
-
* updates
+
-
* docs
+
-
* etc
+
-
== Use Cases ==
+
''After some long hours of phone calls and e-mails, the Jewels driver was successful in fixing his flat, as well as delivering these 2 shipments to CEI Holmdel. He calls his dispatcher to advise this and he updates his system that these 2 shipments were delivered today Jul 24.  That information is sent to TMS, then TMS sends that same information back to Jaguar and automatically updates the CT record with the actual delivery date.''
-
=== Use case 1. Jaguar Discovers Approved CTs ===
+
'''..whenever the driver returned'''
-
1) Jaguar operator logs into CT2 internal application to find these "Approved" CT records on their TDS dashboard.
+
''Jewels takes the POD (or signed confirmation receipt), makes sure that the CT# is listed on the paperwork and faxes/e-mails the POD to Jaguar Freight.''''
-
[[File:TruckDomStatus1.JPG]]
+
'''the following morning July 25'''
-
2) As well, Jaguar operator logs onto the TMS system, goes into the Main Menu, > Activity Summaries > Activity Details to find their are new shipments listed.  (They are the same "Approved" CT records from internal app).
+
''Jaguar operator received the POD document and uploads it into the CT record.'''
-
[[Figure 1]]
+
=== Use Cases ===
-
2a) Jag operator clicks one New, reviews all of the information for them to decide who they would like to arrange for the pickup.
+
==== Use Case 1. ====
-
3) Now through TMS, Jag operator assigns the pickup trucker.
+
===== Jaguar Discovers Approved CTs =====
-
4) Then TMS transits this information to the pickup truckers system and waits for their acceptance or rejection.
+
====== Figure 1 ======
-
=== Use case 1a. Direct Pickup and delivery (NJ, NY, and CT)  ===
+
Jaguar operator logs into CT2 internal application to find 3 new "Approved" CT records on their TDS dashboard.
-
1) Trucking company receives all relevant shipping information (pickup & delivery address, the packaging information - including weight and volume) from TMS.  
+
[[File:Susan's TDS.JPG]]
-
1a) Trucker confirms to TMS that they accept the shipment.
+
===== Jaguar Operator uses TMS =====
-
1b) TMS receives this acceptance, sends the information back to Jaguar and automatically updates the CT records with the pickup trucking companies name.
+
====== Figure 2 ======
-
2) Trucker updates his system with an estimated pickup date.
+
Jaguar operator logs onto the TMS system, goes into the Main Menu, > Activity Summaries > Activity Details to find their are new shipments listed.  (These are the same "Approved" CT records that are on their TDS dashboard on the internal app).
-
2a) Truckers system sends that information to TMS, then TMS sends the information back to Jaguar and automatically updates the CT records with the estimated pickup date.
+
[[File:Activity Details Page n1.JPG]]
-
3) Trucker pickups the shipments from each of the shippers (trucking company can use many different drivers to pickup within the tri-state area).
+
====== Figure 3 ======
-
4) Trucker unloads the shipments at his warehouse to consolidate for delivery and updates his system.
+
Jag operator clicks on the number of new shipments (3) to review for them to decide who they would like to arrange for the pickup.
-
4b) Truckers system sends that information to TMS, then TMS sends the information to Jaguar and automatically updates the CT record with the actual pickup date.
+
[[File:TMS Shipment list 1.JPG]]
-
5) Trucker now updates his system that the shipments are loaded and are out for delivery.
+
====== Figure 4 ======
-
5a) Jaguar operator goes into TMS to update the estimated delivery date.
+
Jag operator looks at the first CT record # 11111.
-
5b) Truckers system sends that information to TMS, then TMS sends the information back to Jaguar and automatically updates the CT records with the estimated delivery date.
+
[[File:TMS Shipment 1.JPG]]
-
6) Consignee receives their shipments and gives a confirmation POD (proof of delivery) document to the trucker.
+
====== Figure 5 ======
-
7) Trucker updates his system with the confirmation POD information (Name of who signed for it, date and time) received from the consignee.
+
Jaguar operator Susan begins the optimization Process from the new shipment list. She highlights all 3 new shipments, then she right clicks and chooses option '''''Consolidate All'''''.  Now the build load page displays.  
-
7b) Truckers system sends that information to TMS, then TMS sends the information back to Jaguar and automatically updates the CT records with the actual delivery date.
+
[[File:TMS Build Loads 1.JPG]]
-
8) Trucker writes the CT# reference on the POD (CT# must match the CT# that was created by shipper user).
+
====== Figure 6  ======
-
9) Trucker faxes/e-mails the POD to Jaguar.
+
Jaguar operator routes via TMS and uses the '''''Interactive Load Editor''''' to arrange the order of pickups and once done, chooses '''''Validate''''' so she can send a tender to the trucker.
-
10) Jaguar operator uploads the POD document into the CT record.
+
[[File:Consolidation Build Load2.JPG]]
-
=== Use case 1b. Consol Pick-up and deliver (VA)  ===
+
====== Figure 7 ======
-
1) Trucking company receives all relevant shipping information (pickup & delivery address, the packaging information - including weight and volume) from TMS.  
+
Jaguar operator tenders the load load to Jewels Trucking by right clicking on the load number. TMS transits this information to the pickup truckers system and Jag operator waits for their acceptance or rejection.
-
1a) Trucker confirms to TMS that they accept the shipment.
+
[[File:TMS Tender Available Loads.JPG]]
-
1b) TMS receives this and sends the information back to Jaguar and automatically updates the CT records with the pickup trucking companies name.
 
-
2) Trucker updates his system with an estimated pickup date.
+
== Various Use Cases  ==
-
2a) Truckers system sends that information to TMS, then TMS sends the information back to Jaguar and automatically updates the CT records with the estimated pickup date.
+
=== UC 101 Editing Shipment data on CT side after Shipment Import ===
-
3) Trucker pickups the shipments from each of the shippers (trucking company can use many different drivers to pickup within the tri-state area).
+
see [[Shipment_Import#UC_101_Editing_Shipment_data_on_CT_side_after_Shipment_Import]]
-
4) Trucker unloads the shipments at his warehouse and places them to the side for another carrier to arrange the delivery and updates his system that they are ready (or on hand) for pickup.
+
=== UC 102 Editing Shipment data on TMS side after Shipment Import ===
-
NOTE: Jaguar handles these shipments from the shipper's to the warehouse ONLY.
+
Only some fields will be updated in CT DB through Load Plan.
-
4a) Truckers system sends that information to TMS, then TMS sends the information to Jaguar and automatically updates the CT record with the actual pickup date.
+
Descartes can not make Shipment fields read only.
-
5) Delivery trucker now goes in to pick up the shipments, signs a confirmation receipt (which is like a POD) of what he is picking up and gives a copy to the pickup trucker.  Pickup trucker updates their system that the shipments were transferred to the delivery trucker accordingly.
+
=== UC 103 One Commodity line with both loose and plts will translate into 2 line items on Descartes side ===
-
5a) Truckers system sends that information to TMS, then TMS sends the information back to Jaguar and automatically updates the CT records with the estimated & actual delivery dates.
+
Line with loose will have Qty=0 and Weight = 0.01
-
6) Pickup trucker takes the signed confirmation receipt, writes the CT# reference on it (CT# must match the CT# that was created by shipper user).
+
=== UC 104a Re tendering before Trucker accepts ===
-
7) Trucker faxes/e-mails the POD to Jaguar.
+
1. CT#xxx was made part of load LD#yyy
 +
2. LD#yyy was tendered to Trucker ZZZ and pending acceptance
 +
3. Jaguar want to change the Trucker
-
8) Jaguar operator uploads the POD document into the CT record.
+
=== UC 104b Re tendering because Trucker rejects ===
-
== Use case ==
+
=== UC 104c Re tendering after Trucker accepts ===
 +
This case can't happen.
-
== Figures ==
+
=== UC 200 Shipment Import for Approved with date ===
 +
Does it work.
-
=== Figure 1 ===
+
== Questions ==
-
[[File:Activity Details Page.JPG]]
+
* Will routed / pick up counter update correctly?
 +
* Will they generate any reports?
 +
* If CT is too large (>26?plts?) it will not be processed by TMS

Current revision as of 20:32, 20 December 2010


Contents

[edit] About

This article was used as an idea on how the Arden domestic team would use the TM. It is not relevant to the current business process as it was newly defined.

[edit] Examples

[edit] One CT from A to B

  • import/create 1 CT
  • move CT from A to B on one truck (manually) (One Load?)
  • Assign trucker (manually)
  • Assign pickup/delivery dates (manually?)

[edit] Two CTs from A to B

  • import/create 2 CT
  • move both CTs from A to B on one truck (manually) (One Load?)
  • Assign trucker (manually)
  • Assign pickup/delivery dates (manually?)

[edit] Combining 2 shipments Miami to Boston and Atlanta to NY into one load

  • CT1:
    • from: Miami, FL
    • to: Boston, MA
  • CT2:
    • from: Atlanta, GA
    • to: New York, NY

[edit] Shipment Import XML

TBD

[edit] Optimal route

  • Track A:
    • Start: Pick up CT1 in Miami
    • Stop#1: Pick up CT2 in Atlanta
    • Stop#2: Drop off CT2 in New York
    • Finish: Drop off CT1 in Boston
[edit] Load Plan XML for Optimal

TBD

[edit] Non Optimal route

  • Track A:
    • Start: Pick up CT1 in Miami
    • Finish: Drop off CT1 in Boston
  • Track B:
    • Start: Pick up CT2 in Atlanta
    • Finish: Drop off CT2 in New York
[edit] Load Plan XML for Non Optimal

TBD

[edit] TMS use options

  • operator creates #Optimal route manually
    • discovering shipments to combine
    • discovering optimal route
    • discovering optimal cost carrier

[edit] Link to User Guide

Similar example - see Pic on page 153 in Descartes TMS User guide.

[edit] Business story

July 22

Shipper Mary with Jackel creates 1 new CT record (# 11111) shipping from her NJ warehouse, Gannet Warehouse at 58 Executive Drive in Edison, NJ. She only has 1 pallet ready and would like to get this off of her warehouse dock so her warehouse can continue with their monthly inventory stock report. Now at the same shipper Harry with Princeton Label creates 1 new CT record (# 11145) shipping from his NJ warehouse, Princeton Labels & Packaging Inc at 1226 Route 130 in Robbinsville, NJ. He has about 15 pallets that are ready to ship today and hopes that CEI Roanoke will approve this PO/SKU to ship.

...later that day...

Shipper Orlando with Pochet creates 1 new CT record (# 11200) shipping from his NJ warehouse, Vecco Holdings at 6801 West Side Avenue in North Bergen and he also has only 1 pallet that is ready to ship'

...even later that day...

At once, 2 separate Arden planners approve these 3 CT records (# 11111, 11145 & 11200) and now Jag operator Susan notices that her TDS dashboard has 3 approved shipments. So she logs into TMS and finds those same 3 records on her new shipment list. Its now 3:45 in the afternoon and as Susan reviews each of the shipments, she notices they are all shipping from NJ and arranges in TMS to build a load with the optimization process. After her load is built, she tenders the load to Jewels Transportation and awaits their replies.

...shortly before quitting time...

Jewels accepts the tender, confirms they'll arrange to collect all 3 shipments at 17 pallets total the next day. Now all 3 CT2 records are updated with the pickup truckers name, as well as the estimated pickup date. As well, all 3 shippers, including EA Dom receive an e-mail notification from cybertrax@jaguarfreight.com that their records were approved and Jewels Transportation will pickup.

Late afternoon July 23

Jewels collects all 3 shipments and updates their system. Trucker unloads these shipments at his warehouse and places the 1 shipment to the side for a different carrier to arrange the delivery and updates their system that all were collected and on hand. Once they update their system, that information is sent to TMS, then TMS sends the information to Jaguar and automatically updates the CT records with the actual pickup date.

...early evening

Delivery trucker, Lawrence Trucking goes in to pick up the 1 shipment for CEI Roanoke. He signs a confirmation receipt (which is like a POD) of what he is picking up and gives a copy to Jewels. They update their system that this 1 shipment was transferred to the delivery trucker accordingly and their system sends that information to TMS, then TMS sends the information back to Jaguar and automatically updates the CT record with the delivery truckers name, including the estimated & actual delivery dates. Now Jewels takes the signed confirmation receipt, writes the CT# reference on it (as the CT# must match the CT# that was created by shipper user) and faxes/e-mails the POD to Jaguar Freight.

...shortly after Lawrence leaves Jewels dock

Jewels warehouse manager is arranging for his truckers morning deliveries. He loads his driver with several different shipments delivering to the local NJ area which includes these 2 shipments that are delivering to CEI Holmdel. He updates his system that these 2 shipments will be delivering tomorrow Jul 24 and that information sends to TMS. Then TMS sends the information back to Jaguar and automatically updates the CT record with the delivery truckers name, including the estimated date.

the next morning July 24...

Jag operator Susan receives the Lawrence POD from Jewels and up loads the POD into the CT record. She also checks to see that Jewels has arranged for the 2 shipments to CEI Holmdel for delivery today.

...right before lunch

Jewels dispatcher hears from his local NJ driver who advises he just got a flat tire...He advises him that it's going to take some time before he can get it fixed and is unsure if he can arrange his last drop...His last drop or delivery is for CEI Holmdel. Now Jewels Dispatcher calls Jaguar to notify them of the same and Jaguar advises Debbie at CEI Holmdel that her delivery will be late

4:35 pm...

After some long hours of phone calls and e-mails, the Jewels driver was successful in fixing his flat, as well as delivering these 2 shipments to CEI Holmdel. He calls his dispatcher to advise this and he updates his system that these 2 shipments were delivered today Jul 24. That information is sent to TMS, then TMS sends that same information back to Jaguar and automatically updates the CT record with the actual delivery date.

..whenever the driver returned

Jewels takes the POD (or signed confirmation receipt), makes sure that the CT# is listed on the paperwork and faxes/e-mails the POD to Jaguar Freight.''

the following morning July 25

Jaguar operator received the POD document and uploads it into the CT record.'

[edit] Use Cases

[edit] Use Case 1.

[edit] Jaguar Discovers Approved CTs
[edit] Figure 1

Jaguar operator logs into CT2 internal application to find 3 new "Approved" CT records on their TDS dashboard.

File:Susan's TDS.JPG

[edit] Jaguar Operator uses TMS
[edit] Figure 2

Jaguar operator logs onto the TMS system, goes into the Main Menu, > Activity Summaries > Activity Details to find their are new shipments listed. (These are the same "Approved" CT records that are on their TDS dashboard on the internal app).

File:Activity Details Page n1.JPG

[edit] Figure 3

Jag operator clicks on the number of new shipments (3) to review for them to decide who they would like to arrange for the pickup.

File:TMS Shipment list 1.JPG

[edit] Figure 4

Jag operator looks at the first CT record # 11111.

File:TMS Shipment 1.JPG

[edit] Figure 5

Jaguar operator Susan begins the optimization Process from the new shipment list. She highlights all 3 new shipments, then she right clicks and chooses option Consolidate All. Now the build load page displays.

File:TMS Build Loads 1.JPG

[edit] Figure 6

Jaguar operator routes via TMS and uses the Interactive Load Editor to arrange the order of pickups and once done, chooses Validate so she can send a tender to the trucker.

File:Consolidation Build Load2.JPG

[edit] Figure 7

Jaguar operator tenders the load load to Jewels Trucking by right clicking on the load number. TMS transits this information to the pickup truckers system and Jag operator waits for their acceptance or rejection.

File:TMS Tender Available Loads.JPG


[edit] Various Use Cases

[edit] UC 101 Editing Shipment data on CT side after Shipment Import

see Shipment_Import#UC_101_Editing_Shipment_data_on_CT_side_after_Shipment_Import

[edit] UC 102 Editing Shipment data on TMS side after Shipment Import

Only some fields will be updated in CT DB through Load Plan.

Descartes can not make Shipment fields read only.

[edit] UC 103 One Commodity line with both loose and plts will translate into 2 line items on Descartes side

Line with loose will have Qty=0 and Weight = 0.01

[edit] UC 104a Re tendering before Trucker accepts

1. CT#xxx was made part of load LD#yyy 2. LD#yyy was tendered to Trucker ZZZ and pending acceptance 3. Jaguar want to change the Trucker

[edit] UC 104b Re tendering because Trucker rejects

[edit] UC 104c Re tendering after Trucker accepts

This case can't happen.

[edit] UC 200 Shipment Import for Approved with date

Does it work.

[edit] Questions

  • Will routed / pick up counter update correctly?
  • Will they generate any reports?
  • If CT is too large (>26?plts?) it will not be processed by TMS
Retrieved from "https://wiki.jaguarfreight.com/Use_Cases_for_EDI_to_TMS"
Personal tools